This research was conducted to identify the test of the water quality which good for consumption. It can be proved from temperature, turbidity level, and TDS (Total Dissolved Solids). By tempting the sensor, the turbidity and TDS meter controlled with the Arduino uno and the MCU node is forwarded to send data to the bylink application. The bylink application will help in monitoring water conditions by displaying the water condition which fit for consuming. The method used in this research was started with making a prototype then producing data to determine the feasibility of water through the TDS sensor, temperature sensor, and NTU (water clarity). This indicators were developed on an Android system whom the user could determine feasibility water easier.
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Mulawarman University
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulis
Organisasi
Artikel bersama
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.