Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Pengembangan Deteksi Suhu dan Kelembaban Laboratorium Elektronika Dengan Menggunakan Metode Fuzzy Logic

Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro · Vol. 6 No. 1 (2022) · hlm. 19–27

DOI
10.22373/crc.v6i1.10498
ISSN
2549-3701, 2549-3698
Terbit
2022-02-23
Penerbit
PTE FTK UIN Ar-Raniry
Bahasa
eng

Abstrak

The electronics laboratory is an important place to run the practical activities, especially among electronics students. It is important to protect laboratory equipment and components from the temperature and humidity factors. Whether, the temperature is too cold and the humidity is too high, it caused the corrosion of all electronic components. Thus, it also caused minor until severe damage of the components. Arduino is an open source electronics kit which specially designed to make easier for researcher to develop electronic devices regarding to various sensors and controllers. The laboratory room temperature detection system was carried out by using an Arduino device, which aims to determine the temperature conditions in the laboratory. The method used in this research is the fuzzy logic method. The software used is Arduiono and Matlab, while the hardware is power supply, D1 Mini microcontroller, DHT11 sensor and LCD. The results showed that the temperature data obtained from the DHT11 sensor will be displayed on the LCD. The temperature data obtained is 27 degrees Celsius – 29 degrees Celsius. The system is able to provide information when the temperature and humidity conditions are abnormal and the LED lights up according to room conditions.

Kata kunci

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Harapan Bersama
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ar-raniry.ac.id/index.php/circuit/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Pengembangan Deteksi Suhu dan Kelembaban Laboratorium Elektronika Dengan Menggunakan Metode Fuzzy Logic</dc:title>
	<dc:creator xml:lang="en">Niam, Bahrun</dc:creator>
	<dc:creator xml:lang="en">Darpono, Rony</dc:creator>
	<dc:creator xml:lang="en">Sabara, Martselani Adias</dc:creator>
	<dc:subject xml:lang="en">Microcontroller</dc:subject>
	<dc:subject xml:lang="en">Temperature</dc:subject>
	<dc:subject xml:lang="en">Fuzzy</dc:subject>
	<dc:description xml:lang="en">The electronics laboratory is an important place to run the practical activities, especially among electronics students. It is important to protect laboratory equipment and components from the temperature and humidity factors. Whether, the temperature is too cold and the humidity is too high, it caused the corrosion of all electronic components. Thus, it also caused minor until severe damage of the components. Arduino is an open source electronics kit which specially designed to make easier for researcher to develop electronic devices regarding to various sensors and controllers. The laboratory room temperature detection system was carried out by using an Arduino device, which aims to determine the temperature conditions in the laboratory. The method used in this research is the fuzzy logic method. The software used is Arduiono and Matlab, while the hardware is power supply, D1 Mini microcontroller, DHT11 sensor and LCD. The results showed that the temperature data obtained from the DHT11 sensor will be displayed on the LCD. The temperature data obtained is 27 degrees Celsius – 29 degrees Celsius. The system is able to provide information when the temperature and humidity conditions are abnormal and the LED lights up according to room conditions.</dc:description>
	<dc:publisher xml:lang="en">PTE FTK UIN Ar-Raniry</dc:publisher>
	<dc:date>2022-02-23</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/10498</dc:identifier>
	<dc:identifier>10.22373/crc.v6i1.10498</dc:identifier>
	<dc:source xml:lang="en">Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro; Vol. 6 No. 1 (2022); 19-27</dc:source>
	<dc:source>2549-3701</dc:source>
	<dc:source>2549-3698</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/10498/6669</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Bahrun Niam, Rony Darpono, Martselani Adias Sabara</dc:rights>
</oai_dc:dc>