Melola Discovery

← Melola Discovery

Jurnal

Perancangan Alat Pengaduk Magnetik Berbasis Arduino Uno Atmega 328p

Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro · Vol. 7 No. 1 (2023) · hlm. 69–78

DOI
10.22373/crc.v7i1.14915
ISSN
2549-3701, 2549-3698
Terbit
2023-01-18
Penerbit
PTE FTK UIN Ar-Raniry
Bahasa
eng

Abstrak

To stir and homogenize chemical solutions and other liquid substances, a magnetic stirrer is required. This study aims to create a magnetic stirrer device with three speed levels based on the Arduino Uno microcontroller. This stirrer tool is made up of a DC motor, a Microcontroller with the IC ATmega 328P, a speed control circuit, a buzzer, and an LCD display. The IC controller will initialize commands to the LCD circuit and the speed control circuit when the device is turned on, according to the tool's working principle. When the set timer button is pressed, the speed set menu appears; on the speed set menu, press the high, low, and normal buttons to select the speed.The motor's speed is controlled using the PWM principle, which involves setting the duty cycle to 25% (Low) for low speeds where the voltage supply to the DC motor is 1.25 volts, 60% for medium speed (Normal) where the voltage supply is 3 volts, and 100% for high speed (High) where the voltage supply is 5 volts. Then press the Start button to begin stirring. If the motor is turned on, the tool will run for a predetermined time ranging from 1 to 15 minutes. Then, press the required speed start button. Then, press the start button to begin stirring; if the motor runs, the stirrer tool will run for the duration specified. To determine the speed of a DC motor at low speeds. Low speed DC motor speed measurements yielded a speed of 2673 rpm, normal speed yielded a speed of 3294 rpm, and high speed yielded a speed of 4438 rpm. The buzzer will sound when the stirring process is complete.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 133 tautan kepenulisan bersama · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Singaperbangsa Karawang
  • Hasanuddin University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhammad NawawiAfiliasi tidak diketahui2
Irman HermadiAfiliasi tidak diketahui2
Salnuddin SalnuddinAfiliasi tidak diketahui2
I Wayan NurjayaAfiliasi tidak diketahui2
Nyoman M N NatihAfiliasi tidak diketahui2
Totok HestirianotoAfiliasi tidak diketahui2
Shofia AminAfiliasi tidak diketahui1
Dahmiri DahmiriAfiliasi tidak diketahui1
Rista Aldilla SyafriAfiliasi tidak diketahui1
Abdul HadiUniversity of Singaperbangsa Karawang1
Nurul AfifahAfiliasi tidak diketahui1
M AminAfiliasi tidak diketahui1
Fajar AfriantoAfiliasi tidak diketahui1
Roma AprihenAfiliasi tidak diketahui1
Riski MaulanaAfiliasi tidak diketahui1
Hanif Naufal ZuhdiAfiliasi tidak diketahui1
Elwita FebrinolaAfiliasi tidak diketahui1
Sindy KiraraAfiliasi tidak diketahui1
Mella AstikaAfiliasi tidak diketahui1
Yulia PutriAfiliasi tidak diketahui1
Muhammad AliAfiliasi tidak diketahui1
Rohman WilianAfiliasi tidak diketahui1
Anjas Kesuma PutraAfiliasi tidak diketahui1
Rohman WillianAfiliasi tidak diketahui1
Izmi Anisa OktavianiAfiliasi tidak diketahui1
Sry RositaAfiliasi tidak diketahui1
Dyta DahliyantiAfiliasi tidak diketahui1
Sumarni SumarniHasanuddin University1
Wahyudi FirmansyahAfiliasi tidak diketahui1
Wisma WismaAfiliasi tidak diketahui1
Lukman HandokoAfiliasi tidak diketahui1
Agry AlfiahAfiliasi tidak diketahui1
HayatiAfiliasi tidak diketahui1
Naila Eka FazlinAfiliasi tidak diketahui1
Nofrivul NofrivulAfiliasi tidak diketahui1
SYUKRI ISKAAfiliasi tidak diketahui1
Elsy RenieAfiliasi tidak diketahui1
Ifelda NengsihAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ar-raniry.ac.id/index.php/circuit/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Perancangan Alat Pengaduk Magnetik Berbasis Arduino Uno Atmega 328p</dc:title>
	<dc:creator xml:lang="en">Jaya, Indra</dc:creator>
	<dc:creator xml:lang="en">Ikhwal, Di</dc:creator>
	<dc:subject xml:lang="en">Maqnetic Stirrer</dc:subject>
	<dc:subject xml:lang="en">speed level</dc:subject>
	<dc:subject xml:lang="en">timer</dc:subject>
	<dc:description xml:lang="en">To stir and homogenize chemical solutions and other liquid substances, a magnetic stirrer is required. This study aims to create a magnetic stirrer device with three speed levels based on the Arduino Uno microcontroller. This stirrer tool is made up of a DC motor, a Microcontroller with the IC ATmega 328P, a speed control circuit, a buzzer, and an LCD display. The IC controller will initialize commands to the LCD circuit and the speed control circuit when the device is turned on, according to the tool's working principle. When the set timer button is pressed, the speed set menu appears; on the speed set menu, press the high, low, and normal buttons to select the speed.The motor's speed is controlled using the PWM principle, which involves setting the duty cycle to 25% (Low) for low speeds where the voltage supply to the DC motor is 1.25 volts, 60% for medium speed (Normal) where the voltage supply is 3 volts, and 100% for high speed (High) where the voltage supply is 5 volts. Then press the Start button to begin stirring. If the motor is turned on, the tool will run for a predetermined time ranging from 1 to 15 minutes. Then, press the required speed start button. Then, press the start button to begin stirring; if the motor runs, the stirrer tool will run for the duration specified. To determine the speed of a DC motor at low speeds. Low speed DC motor speed measurements yielded a speed of 2673 rpm, normal speed yielded a speed of 3294 rpm, and high speed yielded a speed of 4438 rpm. The buzzer will sound when the stirring process is complete.</dc:description>
	<dc:publisher xml:lang="en">PTE FTK UIN Ar-Raniry</dc:publisher>
	<dc:date>2023-01-18</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/14915</dc:identifier>
	<dc:identifier>10.22373/crc.v7i1.14915</dc:identifier>
	<dc:source xml:lang="en">Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro; Vol. 7 No. 1 (2023); 69-78</dc:source>
	<dc:source>2549-3701</dc:source>
	<dc:source>2549-3698</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/14915/8800</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Indra Jaya, Di Ikhwal</dc:rights>
</oai_dc:dc>