Melola Discovery

← Melola Discovery

Jurnal

Overspeed Detection Using Arduino Uno-based IR Infrared Sensor

Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro · Vol. 7 No. 2 (2023) · hlm. 189–194

DOI
10.22373/crc.v7i2.16409
ISSN
2549-3701, 2549-3698
Terbit
2023-08-25
Penerbit
PTE FTK UIN Ar-Raniry
Bahasa
eng

Abstrak

The goal of this project is to measure the speed of an object as it passes through the sensor being utilized. The tool that will be developed as a result of this project has already been designed in software simulation to ensure that it will work as intended. This device uses two infrared sensors as input signals to be processed in accordance with orders.I will be connected to an Arduino Uno through a middle whiteboard as a communication hub between various parts. The parameter used in this tool is the movement of the object going through the infrared sensor because that is what is measured when an object goes through the sensor in this tool. The input data will be processed and then shown on the programmed I2C 16x2 LCD to show the output signal that results from processing the input signal. Making this tool will allow users to minimize unintended incidents and control their speed while driving.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 21 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Akademi Kepolisian
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Wisnu Aldy PradanaState University of Semarang2
Devie IndriyaniAfiliasi tidak diketahui2
Dani SetiyawanState University of Semarang2
Seffy Kusuma NingrumAfiliasi tidak diketahui1
Ani RusilowatiState University of Semarang1
Bagus Setyo NugrohoState University of Semarang1
Luthfi IndrayaniState University of Semarang1
Syaiful RidloState University of Semarang1
Farid AhmadiState University of Semarang1
Monica Niken WulandariAkademi Kepolisian1
Muhammad Kahfi AuliaState University of Semarang1
Nurul ZaatsiyahState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ar-raniry.ac.id/index.php/circuit/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Overspeed Detection Using Arduino Uno-based IR Infrared Sensor</dc:title>
	<dc:creator xml:lang="en">Alhaq, Habib</dc:creator>
	<dc:creator xml:lang="en">Apriaskar, Esa</dc:creator>
	<dc:creator xml:lang="en">Djuniadi, Djuniadi</dc:creator>
	<dc:subject xml:lang="en">Speed</dc:subject>
	<dc:subject xml:lang="en">Displacement</dc:subject>
	<dc:subject xml:lang="en">Infrared Sensor</dc:subject>
	<dc:subject xml:lang="en">Arduino Uno</dc:subject>
	<dc:description xml:lang="en">The goal of this project is to measure the speed of an object as it passes through the sensor being utilized. The tool that will be developed as a result of this project has already been designed in software simulation to ensure that it will work as intended. This device uses two infrared sensors as input signals to be processed in accordance with orders.I will be connected to an Arduino Uno through a middle whiteboard as a communication hub between various parts. The parameter used in this tool is the movement of the object going through the infrared sensor because that is what is measured when an object goes through the sensor in this tool. The input data will be processed and then shown on the programmed I2C 16x2 LCD to show the output signal that results from processing the input signal. Making this tool will allow users to minimize unintended incidents and control their speed while driving.</dc:description>
	<dc:publisher xml:lang="en">PTE FTK UIN Ar-Raniry</dc:publisher>
	<dc:date>2023-08-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/16409</dc:identifier>
	<dc:identifier>10.22373/crc.v7i2.16409</dc:identifier>
	<dc:source xml:lang="en">Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro; Vol. 7 No. 2 (2023); 189-194</dc:source>
	<dc:source>2549-3701</dc:source>
	<dc:source>2549-3698</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/16409/8787</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Habib Thariq Alhaq, Esa Apriaskar, Djuniadi</dc:rights>
</oai_dc:dc>