Melola Discovery

← Melola Discovery

Journal

CONSTRUCTION SPIN COATING AS PRINTING EDIBEL FILM GANYONG

Journal of Teaching and Learning Physics · Vol. 2 No. 1 (2017) · pp. 23–28

DOI
10.15575/jotalp.v2i1.6584
ISSN
2580-3107, 2528-5505
Published
2017-03-01
Publisher
UIN Sunan Gunung Djati Bandung
Language
ind

Abstract

The existence of halal and good food is a basic requirement for Muslims. Maintaining the quality of food from the integrity of nutrients and keep it away from the source of disease is one effort to create good quality food. This will be more valuable if it can be done with natural materials that exist around the community itself. Growing environmental awareness and social sensitivity on the young generation of Muslims is something that can not be separated from education in college. This research is aimed to develop bio-plastic making device based on ganyong (Canna edulis) with the utilization of used and cheap goods. The method used in the research is Research and Development (R & D). Develop Spin Coating devices to suit the needs of edible printing. The effectiveness of measurable measurements of physical bio-plastic factor measurements resulted in strength, thickness and durability. The results of this study show that the results are quite optimal, especially on the thickness factor. The thickness of bio-plastics produced using modified spin coating is <0.5 mm with rotation at a certain speed, ie at 12 volts and 60o - 80oC. The result of bio-plastic obtained can be used as food wrapper which in this research is applied as dodol wrapping. So the quality of nutrition dodol can be more durable.

Collaboration network of the authors

40 authors · 76 co-authorship links · 4 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Indonesia University of Education
  • Sunan Gunung Djati State Islamic University Bandung
  • Universiti Putra Malaysia
  • Farhangian University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Tri wahyu AgustinaAffiliation unknown3
Citra Deliana Dewi SundariAffiliation unknown2
Yaya RukayadiUniversiti Putra Malaysia2
Ragustini RagustiniAffiliation unknown2
Andra Rian MulynaAffiliation unknown2
Muhammad Minan ChusniAffiliation unknown2
Milla ListiawatiAffiliation unknown2
Muslim MuslimIndonesia University of Education1
Rizky Agassy SihombingIndonesia University of Education1
Amir KarimiFarhangian University1
Ida FaridaSunan Gunung Djati State Islamic University Bandung1
N. Dede UmusalamahAffiliation unknown1
R D AgustinaAffiliation unknown1
W SetyaAffiliation unknown1
T GumilarAffiliation unknown1
Febiyuniesa Noorwahnov AkilaAffiliation unknown1
Yulia SukmawardaniAffiliation unknown1
Reni Fitriani RahayuAffiliation unknown1
Eddiyanto EddiyantoAffiliation unknown1
Tita JuwitaningsihAffiliation unknown1
Nurhadi SyahputraAffiliation unknown1
Elda Dewi HandayaniAffiliation unknown1
Meti MaspupahAffiliation unknown1
Cica Aisyah NurlatifahAffiliation unknown1
sumiyati sa'adahAffiliation unknown1
Agung praatamaAffiliation unknown1
Hadiansah HadiansahAffiliation unknown1
Aini KhairunnisaAffiliation unknown1
Rahayu KariadinataAffiliation unknown1
Wati SusilawatiSunan Gunung Djati State Islamic University Bandung1
Lusy FajarwatiAffiliation unknown1
Ferli Septi IrwansyahAffiliation unknown1
Meila N EffendiAffiliation unknown1
Chaerul RochmanSunan Gunung Djati State Islamic University Bandung1
Enden SuhilaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.uinsgd.ac.id/index.php/jtlp/oai, first harvested 7 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">CONSTRUCTION SPIN COATING AS PRINTING EDIBEL FILM GANYONG</dc:title>
	<dc:creator>Yuningsih, Endah Kurnia</dc:creator>
	<dc:creator>Kurniati, Tuti</dc:creator>
	<dc:creator>Windayani, Neneng</dc:creator>
	<dc:creator>Zakwandi, Rizki</dc:creator>
	<dc:creator>Alawiyah, Tiana Azmi</dc:creator>
	<dc:description xml:lang="en-US">The existence of halal and good food is a basic requirement for Muslims. Maintaining the quality of food from the integrity of nutrients and keep it away from the source of disease is one effort to create good quality food. This will be more valuable if it can be done with natural materials that exist around the community itself. Growing environmental awareness and social sensitivity on the young generation of Muslims is something that can not be separated from education in college. This research is aimed to develop bio-plastic making device based on ganyong (Canna edulis) with the utilization of used and cheap goods. The method used in the research is Research and Development (R &amp;amp; D). Develop Spin Coating devices to suit the needs of edible printing. The effectiveness of measurable measurements of physical bio-plastic factor measurements resulted in strength, thickness and durability. The results of this study show that the results are quite optimal, especially on the thickness factor. The thickness of bio-plastics produced using modified spin coating is &amp;lt;0.5 mm with rotation at a certain speed, ie at 12 volts and 60o - 80oC. The result of bio-plastic obtained can be used as food wrapper which in this research is applied as dodol wrapping. So the quality of nutrition dodol can be more durable.</dc:description>
	<dc:publisher xml:lang="en-US">UIN Sunan Gunung Djati Bandung</dc:publisher>
	<dc:date>2017-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.uinsgd.ac.id/index.php/jtlp/article/view/6584</dc:identifier>
	<dc:identifier>10.15575/jotalp.v2i1.6584</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Teaching and Learning Physics; Vol. 2 No. 1 (2017): Journal of Teaching and Learning Physics (Februari 2017); 23-28</dc:source>
	<dc:source>2580-3107</dc:source>
	<dc:source>2528-5505</dc:source>
	<dc:language>ind</dc:language>
	<dc:relation>https://journal.uinsgd.ac.id/index.php/jtlp/article/view/6584/3554</dc:relation>
</oai_dc:dc>