Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Characterization of Industrial Pt-Sn/Al2O3 Catalyst and Transient Product Formations during Propane Dehydrogenation

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2013) · pp. 77–82

DOI
10.9767/bcrec.8.1.4569.77-82
ISSN
1978-2993
Published
2013-06-30
Publisher
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

The major problem plaguing propane dehydrogenation process is the coke formation on the Pt-Sn/Al2O3 catalyst which leads to catalyst deactivation. Due to information paucity, the physicochemical characteristics of the commercially obtained regenerated Pt-Sn/Al2O3 catalyst (operated in moving bed reactor) and coke formation at different temperatures of reaction were discussed. The physicochemical characterization of regenerated catalyst gave a BET surface area of 104.0 m2/g with graphitic carbon content of 8.0% indicative of incomplete carbon gasification during the industrial propylene production. Effect of temperatures on coke formation was identified by studying the product yield via temperature-programmed reaction carried out at 500oC, 600oC and 700oC. It was found that ethylene was precursor to carbon laydown while propylene tends to crack into methane. Post reaction, the spent catalyst possessed relatively lower surface area and pore radius whilst exhibited higher carbon content (31.80% at 700oC) compared to the regenerated catalyst. Significantly, current studies also found that higher reaction temperatures favoured the coke formation. Consequently, the propylene yield has decreased with reaction temperature. © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)Corrigendum/Erratum of this article at: https://doi.org/10.9767/bcrec.9.2.7136.155

Keywords

Collaboration network of the authors

20 authors · 56 co-authorship links · 5 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • DRB-HICOM University of Automotive Malaysia
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Md. Maksudur Rahman KhanUniversiti Malaysia Pahang Al-Sultan Abdullah4
Bamidele Victor AyodeleUniversiti Malaysia Pahang Al-Sultan Abdullah3
Jolius GimbunUniversiti Malaysia Pahang Al-Sultan Abdullah3
Kah Weng SiewUniversiti Malaysia Pahang Al-Sultan Abdullah2
Hua Chyn LeeUniversiti Malaysia Pahang Al-Sultan Abdullah2
Kim Hoong NgUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohd Rizauddin DeramanUniversiti Malaysia Pahang Al-Sultan Abdullah1
Chun How AngUniversiti Malaysia Pahang Al-Sultan Abdullah1
Soo Kee ChongUniversiti Malaysia Pahang Al-Sultan Abdullah1
Zi Ying KongUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohd Nasir Nor ShahirahUniversiti Malaysia Pahang Al-Sultan Abdullah1
M. Anwar HossainUniversiti Malaysia Pahang Al-Sultan Abdullah1
Hamidah AbdullahUniversiti Malaysia Pahang Al-Sultan Abdullah1
Kaykobad Md. Rezaul KarimUniversiti Malaysia Pahang Al-Sultan Abdullah1
Huei Ruey OngDRB-HICOM University of Automotive Malaysia1
Abu YousufUniversiti Malaysia Pahang Al-Sultan Abdullah1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, first harvested 8 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Characterization of Industrial Pt-Sn/Al2O3 Catalyst and Transient Product Formations during Propane Dehydrogenation</dc:title>
	<dc:creator>Ho, Kah Sing</dc:creator>
	<dc:creator>Chye, Joanna Jo Ean</dc:creator>
	<dc:creator>Chin, Sim Yee</dc:creator>
	<dc:creator>Cheng, Chin Kui</dc:creator>
	<dc:subject xml:lang="en-US">Carbon formation; Industrial Pt-Sn/Al2O3 catalyst; Propane dehydrogenation</dc:subject>
	<dc:description xml:lang="en-US">The major problem plaguing propane dehydrogenation process is the coke formation on the Pt-Sn/Al2O3 catalyst which leads to catalyst deactivation. Due to information paucity, the physicochemical characteristics of the commercially obtained regenerated Pt-Sn/Al2O3 catalyst (operated in moving bed reactor) and coke formation at different temperatures of reaction were discussed. The physicochemical characterization of regenerated catalyst gave a BET surface area of 104.0 m2/g with graphitic carbon content of 8.0% indicative of incomplete carbon gasification during the industrial propylene production. Effect of temperatures on coke formation was identified by studying the product yield via temperature-programmed reaction carried out at 500oC, 600oC and 700oC. It was found that ethylene was precursor to carbon laydown while propylene tends to crack into methane. Post reaction, the spent catalyst possessed relatively lower surface area and pore radius whilst exhibited higher carbon content (31.80% at 700oC) compared to the regenerated catalyst. Significantly, current studies also found that higher reaction temperatures favoured the coke formation. Consequently, the propylene yield has decreased with reaction temperature. © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)Corrigendum/Erratum of this article at: https://doi.org/10.9767/bcrec.9.2.7136.155</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:contributor xml:lang="en-US">Ministry of Higher Education Malaysia|RDU121001</dc:contributor>
	<dc:date>2013-06-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/19521</dc:identifier>
	<dc:identifier>10.9767/bcrec.8.1.4569.77-82</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2013: BCREC Volume 8 Issue 1 Year 2013 (June 2013); 77-82</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/19521/9418</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2013 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>