Open access
Journal
SINTA 1
WORK MEASUREMENT STUDY ON MOTOR-MANUAL PINE TAPPING OPERATION: THE APPLICATION OF THE CONCEPT OF LEAN MANUFACTURING AND ALLOWANCES
Indonesian Journal of Forestry Research · Vol. 8 No. 1 (2021) · pp. 111–125
ISSN 2406-8195, 2355-7079
Published 2021-04-30
Publisher Association of Indonesian Forestry and Environment Researchers and Technicians
Language eng
Abstract
Derivated products of pine resin have been recognised as competitive commodities in global trade, increasing the need to use resources more efficiently. A hand-held tapping machine with small hoe-shape cutters called “mujitek” has been widely applied in Indonesia among efforts to answer this challenge. In this study, a series of observed (actual) work time data were measured and analysed, adopting lean manufacturing to calculate the basic and standard time of the work and estimate the work produced on the tapping operation. Work elements were identified based on their contribution to change or transform the product and were categorised as value-added, non-value-added, and special allowance. Quantitative data on the work productivity in the tapping operation can be used as one fundamental data in determining a work plan to establish a continuous improvement process. The variable fatigue allowances taken into account in this study were standing posture, abnormal posture, muscular energy, atmospheric conditions, and noise. This study shows that non-value-added work elements (repairing machines, chatting, and smoking) cause inefficiency in tapping operation. Analysis of added-value work elements proved that this hand-held tapping machine offers a higher (1.7 times) work productivity than conventional hand-held tapping tools. However, since humans have limitations in the physical, physiological, and mental dimensions that limit their ability to carry out work at a certain level, the discovered work productivity level should also be validated with other thresholds, e.g., physical workload and risk perception.
Collaboration network of the authors
28 authors ·
52 co-authorship links
· 12 across different organisations
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
IPB University Ehime University Dartmouth College Universiti Putra Malaysia Udayana University Universitas Borneo Tarakan Papua New Guinea University of Technology Affiliation unknown
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Show as table
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.
Metadata source: OAI-PMH (metadata jurnal) https://ejournal.aptklhi.org/index.php/ijfr/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">WORK MEASUREMENT STUDY ON MOTOR-MANUAL PINE TAPPING OPERATION: THE APPLICATION OF THE CONCEPT OF LEAN MANUFACTURING AND ALLOWANCES</dc:title>
<dc:creator>Yuliati Yovi, Efi</dc:creator>
<dc:creator>Prasetiana, Diah</dc:creator>
<dc:creator>Aquilla Nirmalasari, Natasha</dc:creator>
<dc:subject xml:lang="en-US">ergonomics</dc:subject>
<dc:subject xml:lang="en-US">pine resin</dc:subject>
<dc:subject xml:lang="en-US">time study</dc:subject>
<dc:subject xml:lang="en-US">standard time</dc:subject>
<dc:subject xml:lang="en-US">work productivity</dc:subject>
<dc:description xml:lang="en-US">Derivated products of&nbsp; pine resin have been recognised as competitive commodities in global trade, increasing the need to use resources more efficiently.&nbsp; A hand-held tapping machine with small hoe-shape cutters called “mujitek” has been widely applied in Indonesia among efforts to answer this challenge. In this study, a series of&nbsp; observed (actual) work time data were measured and analysed, adopting lean manufacturing to calculate the basic and standard time of&nbsp; the work and estimate the work produced on the tapping operation. Work elements were identified based on their contribution to change or transform the product and were categorised as value-added, non-value-added, and special allowance.&nbsp; Quantitative data on the work productivity in the tapping operation can be used as one fundamental data in determining a work plan to establish a continuous improvement process. The variable fatigue allowances taken into account in this study were standing posture, abnormal posture, muscular energy, atmospheric conditions, and noise.&nbsp; This study shows that non-value-added work elements (repairing machines, chatting, and smoking) cause inefficiency in tapping operation.&nbsp; Analysis of&nbsp; added-value work elements proved that this hand-held tapping machine offers a higher (1.7 times) work productivity than conventional hand-held tapping tools. However, since humans have limitations in the physical, physiological, and mental dimensions that limit their ability to carry out work at a certain level, the discovered work productivity level should also be validated with other thresholds, e.g., physical workload and risk perception.</dc:description>
<dc:publisher xml:lang="en-US">Association of Indonesian Forestry and Environment Researchers and Technicians</dc:publisher>
<dc:date>2021-04-30</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ejournal.aptklhi.org/index.php/ijfr/article/view/64</dc:identifier>
<dc:identifier>10.59465/ijfr.2021.8.1.111-125</dc:identifier>
<dc:source xml:lang="en-US">Indonesian Journal of Forestry Research; Vol. 8 No. 1 (2021): Indonesian Journal of Forestry Research; 111-125</dc:source>
<dc:source>2406-8195</dc:source>
<dc:source>2355-7079</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ejournal.aptklhi.org/index.php/ijfr/article/view/64/28</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2021 IJFR</dc:rights>
<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-nc-sa/4.0</dc:rights>
</oai_dc:dc>
Citations and indexing
OpenAlex
Indexed
via DOI
9 citations
Crossref
Indexed
via DOI
0 citations
Counts as reported by each index on 13 Nov 2026; indexes count citations differently.
OpenAlex also lists this work in: crossref.
Cite this article
APA 7
Yuliati Yovi, E., Prasetiana, D., & Aquilla Nirmalasari, N. (2021). WORK MEASUREMENT STUDY ON MOTOR-MANUAL PINE TAPPING OPERATION: THE APPLICATION OF THE CONCEPT OF LEAN MANUFACTURING AND ALLOWANCES. Indonesian Journal of Forestry Research, 8(1), 111–125. https://doi.org/10.59465/ijfr.2021.8.1.111-125
Copy
IEEE
E. Yuliati Yovi, D. Prasetiana, and N. Aquilla Nirmalasari, “WORK MEASUREMENT STUDY ON MOTOR-MANUAL PINE TAPPING OPERATION: THE APPLICATION OF THE CONCEPT OF LEAN MANUFACTURING AND ALLOWANCES,” Indonesian Journal of Forestry Research, vol. 8, no. 1, pp. 111–125, 2021, doi: 10.59465/ijfr.2021.8.1.111-125.
Copy
Generated from the journal's metadata; check author names before use.