Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Strategic electromagnetic interferences suppression in boost converters: zero-switch techniques

International Journal of Advances in Applied Sciences · Vol. 13 No. 2 (2024) · pp. 340–350

DOI
10.11591/ijaas.v13.i2.pp340-350
ISSN
2722-2594, 2252-8814
Published
2024-06-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This article delves into the growing demand for efficient power conversion technologies accompanying the rise in electric vehicle (EV) adoption. Boost converters, essential for increasing the battery pack voltage to propel EV motors, pose a challenge due to the electromagnetic interference (EMI) generated by the high switching frequency of power devices. To address this issue, practitioners employ zero-voltage switching (ZVS) and zero-current switching (ZCS) techniques. In this comparative study, we systematically evaluate the effectiveness of these soft switching techniques in reducing conducted EMI in boost converters designed for EV applications. The results illuminate the potential of both ZVS and ZCS in significantly mitigating EMI emissions when compared to conventional hard-switching methods. Notably, ZVS soft switching emerges as more efficient and effective, particularly under higher loads, while ZCS soft switching excels in reducing EMI at lighter loads. In conclusion, the study asserts that ZVS soft switching presents a more promising solution for curtailing conducted EMI in boost converters for EV applications, particularly in high-load scenarios. However, it underscores the importance of considering specific operational conditions when deciding between the two techniques.

Collaboration network of the authors

16 authors · 35 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Hassan II Casablanca
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Khalil SaadaouiUniversity of Hassan II Casablanca4
Abderraouf AboudouUniversity of Hassan II Casablanca4
Khalid SabhiUniversity of Hassan II Casablanca3
Soufiane LghaziAffiliation unknown3
Ali Ait SalihAffiliation unknown3
Ali Ait SalihUniversity of Hassan II Casablanca3
Oumaima TakiUniversity of Hassan II Casablanca2
Kaoutar Senhaji RhaziAffiliation unknown1
Yasser BoukioudAffiliation unknown1
Mohamed TarbouchUniversity of Hassan II Casablanca1
Abdelkebir ElamriAffiliation unknown1
Abdel-Ali LaabadliUniversity of Hassan II Casablanca1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, first harvested 8 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Strategic electromagnetic interferences suppression in boost converters: zero-switch techniques</dc:title>
	<dc:creator>M'barki, Zakaria</dc:creator>
	<dc:creator>Ait Salih, Ali</dc:creator>
	<dc:creator>Mejdoub, Youssef</dc:creator>
	<dc:creator>Senhaji Rhazi, Kaoutar</dc:creator>
	<dc:description xml:lang="en-US">This article delves into the growing demand for efficient power conversion technologies accompanying the rise in electric vehicle (EV) adoption. Boost converters, essential for increasing the battery pack voltage to propel EV motors, pose a challenge due to the electromagnetic interference (EMI) generated by the high switching frequency of power devices. To address this issue, practitioners employ zero-voltage switching (ZVS) and zero-current switching (ZCS) techniques. In this comparative study, we systematically evaluate the effectiveness of these soft switching techniques in reducing conducted EMI in boost converters designed for EV applications. The results illuminate the potential of both ZVS and ZCS in significantly mitigating EMI emissions when compared to conventional hard-switching methods. Notably, ZVS soft switching emerges as more efficient and effective, particularly under higher loads, while ZCS soft switching excels in reducing EMI at lighter loads. In conclusion, the study asserts that ZVS soft switching presents a more promising solution for curtailing conducted EMI in boost converters for EV applications, particularly in high-load scenarios. However, it underscores the importance of considering specific operational conditions when deciding between the two techniques.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Laboratory of Networks, Computer Science, Telecommunication, Multimedia (RITM)</dc:contributor>
	<dc:date>2024-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21014</dc:identifier>
	<dc:identifier>10.11591/ijaas.v13.i2.pp340-350</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 13, No 2: June 2024; 340-350</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v13.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21014/13112</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Institute of Advanced Engineering and Science (IAES)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>