Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Effect of heating temperature on quality of bio-briquette empty fruit bunch fiber

International Journal of Advances in Applied Sciences · Vol. 9 No. 3 (2020) · pp. 192–200

DOI
10.11591/ijaas.v9.i3.pp192-200
ISSN
2722-2594, 2252-8814
Published
2020-09-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Empty Fruit Bunches (EFB) are one of the palm oil industry wastes, which are quite plentiful and currently unused optimally. Biomass is one of the renewable energy resources which has important roles in the world. The bio-briquettes are manufactured through densification of waste biomass by implementing certain processes. This research aimed to obtain variations in the mold temperature at 150 ºC, 200 ºC, and 250 ºC to the calorific value and toughness of the briquette material. The toughness was tested using ASTM D 440-86 R02 standard. Arduino program was used for setting the heating resistance time of the mold, which was 20 minutes and the thermal controller was used to adjust the temperature variation. The average mold pressure was 58 Psi. The highest heating value was obtained at a mold temperature of 250 ºC with a value of 5256 cal/g, and the lowest was resulted at a temperature of 150 ºC (4117 cal/g). Meanwhile, the briquette toughness test at 200 ºC mold temperature indicated good data results in which the average loss of fiber particles was only 4.17 %, this was because the adhesion between particles by lignin and cellulose in the fiber functions optimally at this temperature so that the resistance of briquettes went through minor damage.

Collaboration network of the authors

14 authors · 40 co-authorship links · 6 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Andalas University
  • Institut Teknologi Padang
  • Politeknik ATI Padang
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Nofialdi NofialdiAndalas University2
Meilizar MeilizarPoliteknik ATI Padang2
Rika Ampuh HadigunaAndalas University2
EmriadiAffiliation unknown1
Sri MutiarAffiliation unknown1
Alfi AsbenAffiliation unknown1
Rika Ampuh HadigunaAffiliation unknown1
Nofialdi NofialdiAffiliation unknown1
Meilizar MeilizarAffiliation unknown1
Santosa SantosaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of heating temperature on quality of bio-briquette empty fruit bunch fiber</dc:title>
	<dc:creator>Handra, Nofriady</dc:creator>
	<dc:creator>Kasim, Anwar</dc:creator>
	<dc:creator>Gunawarman, Gunawarman</dc:creator>
	<dc:creator>Santosa, Santosa</dc:creator>
	<dc:description xml:lang="en-US">Empty Fruit Bunches (EFB) are one of the palm oil industry wastes, which are quite plentiful and currently unused optimally. Biomass is one of the renewable energy resources which has important roles in the world. The bio-briquettes are manufactured through densification of waste biomass by implementing certain processes. This research aimed to obtain variations in the mold temperature at 150 ºC, 200 ºC, and 250 ºC to the calorific value and toughness of the briquette material. The toughness was tested using ASTM D 440-86 R02 standard. Arduino program was used for setting the heating resistance time of the mold, which was 20 minutes and the thermal controller was used to adjust the temperature variation. The average mold pressure was 58 Psi. The highest heating value was obtained at a mold temperature of 250 ºC with a value of 5256 cal/g, and the lowest was resulted at a temperature of 150 ºC (4117 cal/g). Meanwhile, the briquette toughness test at 200 ºC mold temperature indicated good data results in which the average loss of fiber particles was only 4.17 %, this was because the adhesion between particles by lignin and cellulose in the fiber functions optimally at this temperature so that the resistance of briquettes went through minor damage.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/20298</dc:identifier>
	<dc:identifier>10.11591/ijaas.v9.i3.pp192-200</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 9, No 3: September 2020; 192-200</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v9.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/20298/12887</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Nofriady Handra, Anwar Kasim, Gunawarman Gunawarman, Santosa Santosa</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>