Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Analytical design, modelling and simulation of an LLC resonant converter for an electric vehicle auxiliary power module

International Journal of Power Electronics and Drive Systems · Vol. 17 No. 3 (2026) · pp. 1885–1901

DOI
10.11591/ijpeds.v17.i3.pp1885-1901
ISSN
2722-256X, 2088-8694
Published
2026-09-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper presents an analytical design, modelling, and simulation of an LLC resonant converter for an electric vehicle auxiliary power module (APM). The work contributes a complete LLC‑focused workflow that starts from design specifications and proceeds through: i) Resonant‑tank selection using normalized gain–frequency maps to choose the inductance ratio Ln and a quality factor Qe with soft‑switching in mind; ii) Transformer sizing from core data and loss limits; and iii) Small‑signal‑based PI controller tuning those accounts for the plant’s inherent inversion. The workflow is implemented and validated in MATLAB Simulink and PLECS for input voltages of 235-265 V and load levels from 10% to 100%. The converter achieves a peak efficiency of 98.1% within an 80.6-128.3 kHz switching range, full‑load efficiency of 93.5%, and about ±1% output voltage regulation. The controller maintains stable output settling times of 0.42-0.44 ms during 100% to 80% load steps and the reverse transition. At the highest input voltage, the switching frequency drifts beyond the intended range, which indicates a clear target for controller refinement in future work. The results show that the proposed analytical workflow is practical for designing LLC converters that meet APM efficiency and regulation goals, with cross‑platform simulation providing consistent evidence of performance.

Keywords

Collaboration network of the authors

5 authors · 10 co-authorship links · 4 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Asia Pacific University of Technology & Innovation
  • University of Botswana
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analytical design, modelling and simulation of an LLC resonant converter for an electric vehicle auxiliary power module</dc:title>
	<dc:creator>Noh, Mohamad Affan Mohd</dc:creator>
	<dc:creator>Ravina, Jacques Juicy Patureau</dc:creator>
	<dc:creator>Sivanesan, Sivakumar</dc:creator>
	<dc:creator>Ismail, Hafizul Azizi</dc:creator>
	<dc:creator>Firoozi, Ali Akbar</dc:creator>
	<dc:subject xml:lang="en-US">analytical design; auxiliary power module; LLC resonant converter; simulation model; transformer</dc:subject>
	<dc:description xml:lang="en-US">This paper presents an analytical design, modelling, and simulation of an LLC resonant converter for an electric vehicle auxiliary power module (APM). The work contributes a complete LLC‑focused workflow that starts from design specifications and proceeds through: i) Resonant‑tank selection using normalized gain–frequency maps to choose the inductance ratio Ln and a quality factor Qe with soft‑switching in mind; ii) Transformer sizing from core data and loss limits; and iii) Small‑signal‑based PI controller tuning those accounts for the plant’s inherent inversion. The workflow is implemented and validated in MATLAB Simulink and PLECS for input voltages of 235-265 V and load levels from 10% to 100%. The converter achieves a peak efficiency of 98.1% within an 80.6-128.3 kHz switching range, full‑load efficiency of 93.5%, and about ±1% output voltage regulation. The controller maintains stable output settling times of 0.42-0.44 ms during 100% to 80% load steps and the reverse transition. At the highest input voltage, the switching frequency drifts beyond the intended range, which indicates a clear target for controller refinement in future work. The results show that the proposed analytical workflow is practical for designing LLC converters that meet APM efficiency and regulation goals, with cross‑platform simulation providing consistent evidence of performance.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2026-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24434</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v17.i3.pp1885-1901</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 17, No 3: September 2026; 1885-1901</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v17.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24434/15320</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Mohamad Affan Mohd Noh, Jacques Juicy Patureau Ravina, Sivakumar Sivanesan, Hafizul Azizi Ismail, Ali Akbar Firoozi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>