Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Wireless power transfer system design for electric vehicle dynamic charging application

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 3 (2020) · pp. 1468–1480

DOI
10.11591/ijpeds.v11.i3.pp1468-1480
ISSN
2722-256X, 2088-8694
Published
2020-09-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper proposes and demonstrates a wireless power transfer system design for electric vehicle dynamic charging applications. The dynamic wireless charging (DWC) lane is designed for modularly. Each module has three shorttrack transmitter coils that are placed closely together and connected to a single inverter to reduce the number of inverters. The magnetic coupler design is analyzed and optimized by finite element analysis (FEA) to reduce the output power variation during dynamic charging. The LCC compensation circuit is designed according to the optimal load value to obtain maximum efficiency. The SIC devices are used to improve the efficiency of the high-frequency resonant inverter. A 1.5 kW dynamic charging system prototype is constructed. Experimental results show that the output power variation of 9.5% and the average efficiency of 89.5% are obtained in the moving condition.

Collaboration network of the authors

21 authors · 52 co-authorship links · 13 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Hanoi University of Science and Technology
  • Thai Nguyen University of Technology
  • Electric Power University
  • University of Transport and Communications
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Phuong VuHanoi University of Science and Technology2
Nguyen HungHanoi University of Science and Technology2
Sy Manh HoHanoi University of Science and Technology2
Quoc Tuan LeHanoi University of Science and Technology2
Tung HoangHanoi University of Science and Technology2
Phuong Viet PhamHanoi University of Science and Technology1
H ThốngHanoi University of Science and Technology1
Nguyen Hoang LinhHanoi University of Science and Technology1
Hoang Van CanhHanoi University of Science and Technology1
Diep Huynh VanHanoi University of Science and Technology1
Son Tran QueThai Nguyen University of Technology1
Vuong Nguyen AnhHanoi University of Science and Technology1
Quang Dich NguyenHanoi University of Science and Technology1
Do Ngoc QuyHanoi University of Science and Technology1
Ba Phu DoHanoi University of Science and Technology1
Nguyen Hong QuangThai Nguyen University of Technology1
Võ Thanh HàUniversity of Transport and Communications1
Nguyen Tung LamHanoi University of Science and Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Wireless power transfer system design for electric vehicle dynamic charging application</dc:title>
	<dc:creator>Diep, Nguyen Thi</dc:creator>
	<dc:creator>Trung, Nguyen Kien</dc:creator>
	<dc:creator>Minh, Tran Trong</dc:creator>
	<dc:description xml:lang="en-US">This paper proposes and demonstrates a wireless power transfer system design for electric vehicle dynamic charging applications. The dynamic wireless charging (DWC) lane is designed for modularly. Each module has three shorttrack transmitter coils that are placed closely together and connected to a single inverter to reduce the number of inverters. The magnetic coupler design is analyzed and optimized by finite element analysis (FEA) to reduce the output power variation during dynamic charging. The LCC compensation circuit is designed according to the optimal load value to obtain maximum efficiency. The SIC devices are used to improve the efficiency of the high-frequency resonant inverter. A 1.5 kW dynamic charging system prototype is constructed. Experimental results show that the output power variation of 9.5% and the average efficiency of 89.5% are obtained in the moving condition.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Hanoi University of Science and Technology (HUST)</dc:contributor>
	<dc:date>2020-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20578</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i3.pp1468-1480</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 3: September 2020; 1468-1480</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20578/13309</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Nguyen Thi Diep, Nguyen Kien Trung, Tran Trong Minh</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>