Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Application and Comparison Between the Conventional Methods and PSO Method for Maximum Power Point Extraction in Photovoltaic Systems Under Partial Shading Conditions

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 2 (2018) · pp. 631–640

DOI
10.11591/ijpeds.v9.i2.pp631-640
ISSN
2722-256X, 2088-8694
Published
2018-06-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Several algorithms have been offered to track the Maximum Power Point when we have one maximum power point. Moreover, fuzzy control and neural was utilized to track the Maximum Power Point when we have multi-peaks power points. In this paper, we will propose an improved Maximum Power Point tracking method for the photovoltaic system utilizing a modified PSO algorithm. The main advantage of the method is the decreasing of the steady state oscillation (to practically zero) once the Maximum Power Point is located. moreover, the proposed method has the ability to track the Maximum Power Point for the extreme environmental condition that cause the presence of maximum multi-power points, for example, partial shading condition and large fluctuations of insolation. To evaluate the effectiveness of the proposed method, MATLAB simulations are carried out under very challenging circumstance, namely step changes in irradiance, step changes in load, and partial shading of the Photovoltaic array. Finally, its performance is compared with the perturbation and observation” and fuzzy logic results for the single peak, and the neural-fuzzy control results for the multi-peaks.

Collaboration network of the authors

15 authors · 44 co-authorship links · 11 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Sidi Mohamed Ben Abdellah University
  • Université Moulay Ismail de Meknes
  • Mohamed I University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Badre BossoufiSidi Mohamed Ben Abdellah University5
Manale BouderbalaSidi Mohamed Ben Abdellah University2
Mohammed TaoussiSidi Mohamed Ben Abdellah University2
Hala Alami AroussiMohamed I University2
Chakib El BakkaliSidi Mohamed Ben Abdellah University2
Yasmine IhedraneSidi Mohamed Ben Abdellah University2
Mohammed KarimAffiliation unknown1
Mohammed TaoussiAffiliation unknown1
Nada Zine LaabidineSidi Mohamed Ben Abdellah University1
Afrae ErrarhoutSidi Mohamed Ben Abdellah University1
Btissam MajoutSidi Mohamed Ben Abdellah University1
Douae AbrahmiSidi Mohamed Ben Abdellah University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Application and Comparison Between the Conventional Methods and PSO Method  for Maximum Power Point Extraction in Photovoltaic Systems Under Partial Shading Conditions</dc:title>
	<dc:creator>Ghita, Bennis</dc:creator>
	<dc:creator>Mohammed, Karim</dc:creator>
	<dc:creator>Ahmed, Lagrioui</dc:creator>
	<dc:description xml:lang="en-US">Several algorithms have been offered to track the Maximum Power Point when we have one maximum power point. Moreover, fuzzy control and neural was utilized to track the Maximum Power Point when we have multi-peaks power points. In this paper, we will propose an improved Maximum Power Point tracking method for the photovoltaic system utilizing a modified PSO algorithm. The main advantage of the method is the decreasing of the steady state oscillation (to practically zero) once the Maximum Power Point is located. moreover, the proposed method has the ability to track the Maximum Power Point for the extreme environmental condition that cause the presence of maximum multi-power points, for example, partial shading condition and large fluctuations of insolation. To evaluate the effectiveness of the proposed method, MATLAB simulations are carried out under very challenging circumstance, namely step changes in irradiance, step changes in load, and partial shading of the Photovoltaic array. Finally, its performance is compared with the perturbation and observation” and fuzzy logic results for the single peak, and the neural-fuzzy control results for the multi-peaks.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/7307</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i2.pp631-640</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 2: June 2018; 631-640</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/7307/11193</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Bennis Ghita, Karim Mohammed, Lagrioui Ahmed</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>