Overview of Bifluid-based Photovoltaic Thermal (PVT) Systems

Shahirah Binti Rukman, Nurul; Fudholi, Ahmad; H. Zaidi, Saleem; Sopian, Kamaruzzaman

doi:10.11591/ijpeds.v9.i4.pp1912-1917

Open access Journal SINTA 1

Overview of Bifluid-based Photovoltaic Thermal (PVT) Systems

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 4 (2018) · pp. 1912–1917

DOI: 10.11591/ijpeds.v9.i4.pp1912-1917
ISSN: 2722-256X, 2088-8694
Published: 2018-12-01
Publisher: Institute of Advanced Engineering and Science
Language: eng
License: creativecommons.org/licenses/by-sa/4.0

Abstract

This review presents various research and development, as well as design and performances of bifluid-based PVT systems. Moreover, the development of PVT system is a very promising area of research. PVT systems using in various applications, such as solar drying, solar cooling, water heating, desalination, and pool heating. With the recognition of the potentials and contributions of PV system, considerable research has been conducted to attain the most advancement which may produce reliable and sustainable PVT system. The cooling system’s design refers to the absorber design which mostly focuses on water and air-based PVT systems. An air-based system has been developed through different absorber configurations, air flow modes and single- or double-pass design. Bifluid-based PVT system is used to remove heat accumulated in a PV panel and reuses the waste heat (hot air and water) in an appropriate way. PV, thermal and PVT efficiencies of bifluid PVT systems were 6.6%-18.6%, 31%–90% and 60%-83%, respectively.

Collaboration network of the authors

40 authors · 141 co-authorship links · 77 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

National University of Malaysia
National Research and Innovation Agency
University of Indonesia
Universitas Muhammadiyah Gorontalo
Universitas Islam Negeri Sultan Syarif Kasim Riau
Universitas Islam Negeri Mataram
Universitas Muhammadiyah Riau
Other organisations
Affiliation unknown

Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles

Show as table

Co-author	Organisation	Joint articles
Ivan Taslim	Universitas Muhammadiyah Gorontalo	8
Abrar Ridwan	Universitas Muhammadiyah Riau	8
Rado Yendra	Universitas Islam Negeri Sultan Syarif Kasim Riau	8
Muhammad Zohri	Universitas Islam Negeri Mataram	6
Mohd Hafidz Ruslan	National University of Malaysia	6
Merita Ayu Indrianti	Universitas Muhammadiyah Gorontalo	4
Intan Noviantari Manyoe	State University of Gorontalo	4
Adnan Ibrahim	National University of Malaysia	4
Mariyam Fazleena Musthafa	National University of Malaysia	4
Ari Pani Desvina	Universitas Islam Negeri Sultan Syarif Kasim Riau	4
Tri Suyono	Khairun University	4
Nur Farhana Mohd Razali	National University of Malaysia	4
Hartono Hartono	Affiliation unknown	4
Ari Pani Desvina	Affiliation unknown	4
Saprizal Hadisaputra	University of Mataram	3
Agus Risdiyanto	National Research and Innovation Agency	3
Noviadi Arief Rachman	National Research and Innovation Agency	3
Ant. Ardath Kristi	National Research and Innovation Agency	3
Agus Junaedi	National Research and Innovation Agency	3
Ridwan Arief Subekti	University of Indonesia	3
Majid Khan Majahar Ali	Universiti Sains Malaysia	3
Nurul Shahirah Binti Rukman	National University of Malaysia	3
Lim Chin Haw	National University of Malaysia	3
Fitrotun Aliyah	Affiliation unknown	3
Arthur Gani Koto	Affiliation unknown	3
Emy Zairah Ahmad	Universiti Teknikal Malaysia Melaka	2
Ahmad Fazlizan	National University of Malaysia	2
A.M. Elbreki	College of Electrical and Electronics Technology	2
Sastra Kusuma Wijaya	University of Indonesia	2
Arief Sudarmaji	University of Indonesia	2
Tinton Dwi Atmaja	National Research and Innovation Agency	2
Budi Prawara	National Research and Innovation Agency	2
Anjar Susatyo	National Research and Innovation Agency	2
Rudi Darussalam	National Research and Innovation Agency	2
Dalmasius Ganjar Subagio	National Research and Innovation Agency	2
Udin Komarudin	Universitas Widyatama	2

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 8 Nov 2026.

Original metadata (oai_dc)

<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Overview of Bifluid-based Photovoltaic Thermal (PVT) Systems</dc:title>
	<dc:creator>Shahirah Binti Rukman, Nurul</dc:creator>
	<dc:creator>Fudholi, Ahmad</dc:creator>
	<dc:creator>H. Zaidi, Saleem</dc:creator>
	<dc:creator>Sopian, Kamaruzzaman</dc:creator>
	<dc:description xml:lang="en-US">This review presents various research and development, as well as design and performances of bifluid-based PVT systems. Moreover, the development of PVT system is a very promising area of research. PVT systems using in various applications, such as solar drying, solar cooling, water heating, desalination, and pool heating. With the recognition of the potentials and contributions of PV system, considerable research has been conducted to attain the most advancement which may produce reliable and sustainable PVT system. The cooling system’s design refers to the absorber design which mostly focuses on water and air-based PVT systems. An air-based system has been developed through different absorber configurations, air flow modes and single- or double-pass design. Bifluid-based PVT system is used to remove heat accumulated in a PV panel and reuses the waste heat (hot air and water) in an appropriate way. PV, thermal and PVT efficiencies of bifluid PVT systems were 6.6%-18.6%, 31%–90% and 60%-83%, respectively. </dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/15051</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i4.pp1912-1917</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 4: December 2018; 1912-1917</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/15051/11509</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Nurul Shahirah Binti Rukman, Ahmad Fudholi, Saleem H. Zaidi, Kamaruzzaman Sopian</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>