Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Design and Analysis of In-Wheel Double Stator Slotted Rotor BLDC Motor for Electric Bicycle Application

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 1 (2018) · pp. 457–464

DOI
10.11591/ijpeds.v9.i1.pp457-464
ISSN
2722-256X, 2088-8694
Published
2018-03-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper discusses about design and analysis of double stator slotted rotor (DSSR) BLDC motor for electric bicycle application. Usually single stator (SS) BLDC motor is used in an electric bicycle. This type of motor has low performance and need to be charged regularly. The objective of this research is to design and analysis DSSR motor that have high torque. At starts, design specification for the electric bicycle is calculated. Next, design process for DSSR is carried out by using the desired parameter. Lastly, analysis for double stator slotted rotor is simulated using FEM. Result for average back emf, average inductance, inner stator flux density, outer stator flux density, average torque and estimate torque constant is obtained. Result for average torque from FEM archieve the requirement of motor torque for DSSR design where the maximum average torque is 16.2 Nm. This research will give benefit to mankind and society in term of environment protection and energy consumption.

Collaboration network of the authors

40 authors · 112 co-authorship links · 28 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Universitas Ahmad Dahlan
  • Islamic Azad University, Tehran
  • Universiti Malaysia Perlis
  • Universiti Sains Malaysia
  • Diponegoro University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Auzani JidinUniversiti Teknikal Malaysia Melaka34
Nik Rumzi Nik IdrisUniversity of Technology Malaysia18
Mohammad JannatiUniversity of Technology Malaysia16
Mohd Hatta JopriUniversiti Teknikal Malaysia Melaka15
Awang JusohUniversity of Technology Malaysia15
Nik Rumzi Nik IdrisAffiliation unknown14
Mohd Junaidi Abdul AzizUniversity of Technology Malaysia10
Mustafa ManapUniversiti Teknikal Malaysia Melaka10
Kasrul Abdul KarimAffiliation unknown9
Lina HandayaniUniversitas Ahmad Dahlan8
Mohamed SalemUniversiti Sains Malaysia8
Mahmoud ZadehbagheriIslamic Azad University, Tehran8
Abdul Rahim AbdullahUniversiti Teknikal Malaysia Melaka6
Mochammad FactaDiponegoro University6
Mohammad Javad KianiIslamic Azad University, Tehran5
Shahreen KasimAffiliation unknown5
Watra ArsadiandoAffiliation unknown5
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis5
Mohd Junaidi Abdul AzizAffiliation unknown5
Imam Much Ibnu SubrotoSultan Agung Islamic University4
M. Rahimi YusoffUniversiti Teknikal Malaysia Melaka4
Muhammad AdoUniversity of Technology Malaysia4
Hendril Satrian PurnamaAffiliation unknown4
Anggit PamungkasAffiliation unknown4
Vahdat NazerianUniversity of Mazandaran4
Muhammad Zaid AihsanUniversiti Malaysia Perlis4
Chibuike Peter OhanuUniversity of Nigeria4
Tri WahonoAffiliation unknown4
Rahim IldarabadiAffiliation unknown4
Azralmukmin AzmiAffiliation unknown4
Shahrin Md AyobAffiliation unknown4
Siti Azura Ahmad TarusanAffiliation unknown4

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design and Analysis of In-Wheel Double Stator Slotted Rotor BLDC Motor for Electric Bicycle Application</dc:title>
	<dc:creator>Farina, S.</dc:creator>
	<dc:creator>Firdaus, R.N.</dc:creator>
	<dc:creator>Azhar, F.</dc:creator>
	<dc:creator>Azri, M.</dc:creator>
	<dc:creator>Ahmad, M. S.</dc:creator>
	<dc:creator>Suhairi, R.</dc:creator>
	<dc:creator>Jidin, A.</dc:creator>
	<dc:creator>Sutikno, Tole</dc:creator>
	<dc:description xml:lang="en-US">This paper discusses about design and analysis of double stator slotted rotor (DSSR) BLDC motor for electric bicycle application. Usually single stator (SS) BLDC motor is used in an electric bicycle. This type of motor has low performance and need to be charged regularly. The objective of this research is to design and analysis DSSR motor that have high torque. At starts, design specification for the electric bicycle is calculated. Next, design process for DSSR is carried out by using the desired parameter. Lastly, analysis for double stator slotted rotor is simulated using FEM. Result  for average back emf, average inductance, inner stator flux density, outer stator flux density, average torque and estimate torque constant is obtained. Result for average torque from FEM archieve the requirement of motor torque for DSSR design where the maximum average torque is 16.2 Nm. This research will give benefit to mankind and society in term of environment protection and energy consumption.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/9597</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i1.pp457-464</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 1: March 2018; 457-464</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/9597/11154</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 S. Farina, R.N. Firdaus, F. Azhar, M. Azri, M. S. Ahmad, R. Suhairi, A. Jidin, Tole Sutikno</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>