Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Buck converter optimization using P&O algorithm for PV system based battery charger

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 2 (2020) · pp. 844–850

DOI
10.11591/ijpeds.v11.i2.pp844-850
ISSN
2722-256X, 2088-8694
Published
2020-06-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

In this research, battery charger based on Photovoltaic (PV) system consists of buck converter as useful PV module interface was fabricated. Since output power of PV module changes quickly due to changing solar radiation, optimization is required. One of the easy and cheap optimization techniques is by implementing Perturb and Observe (P&O) algorithm for controlling switch of the buck converter. The P&O algorithm tracks maximum power point by generating suitable duty cycle for switching of the buck converter. The objective of this paper is to present the experimental proof of the P&O algorithm implementation in optimizing performance of the buck converter. The experimental results prove that the P&O algorithm can optimize the work of the buck converter and support shorter charging time by producing higher output voltage and power.

Collaboration network of the authors

29 authors · 72 co-authorship links · 13 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Brawijaya
  • University of Miyazaki
  • California Polytechnic State University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Koichi TannoUniversity of Miyazaki3
Shota MagoUniversity of Miyazaki3
Hiroki TamuraUniversity of Miyazaki3
Panca MudjirahardjoUniversity of Brawijaya3
Stefanus Dion FinnadiUniversity of Brawijaya2
Kakeru ArakiUniversity of Miyazaki2
Ryoichi MiyauchiUniversity of Miyazaki2
Nauval AryawiratamaUniversity of Brawijaya2
Muhammad Ivan FadillahUniversity of Brawijaya2
Wijono WijonoUniversity of Brawijaya2
Waru DjuriatnoUniversity of Brawijaya2
Nola RibathUniversity of Brawijaya2
Sabriansyah Rizqika AkbarUniversity of Brawijaya1
Issa ArwaniUniversity of Brawijaya1
Lunde ArdhentaUniversity of Brawijaya1
Ramadhani Kurniawan SubrotoUniversity of Brawijaya1
Agus NabaUniversity of Brawijaya1
Setyawan P. SaktiUniversity of Brawijaya1
Rini Nur HasanahUniversity of Brawijaya1
Tri NurwatiUniversity of Brawijaya1
Taufik TaufikCalifornia Polytechnic State University1
Aditya Bagus SetyawanUniversity of Brawijaya1
Raden Arief SetyawanUniversity of Brawijaya1
Raisul FalahUniversity of Brawijaya1
Fitri Candra WardanaUniversity of Brawijaya1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Buck converter optimization using P&amp;O algorithm for PV system based battery charger</dc:title>
	<dc:creator>Abidin, Zainul</dc:creator>
	<dc:creator>Muttaqin, Adharul</dc:creator>
	<dc:creator>Maulana, Eka</dc:creator>
	<dc:creator>Ramadhan, M. Gilang</dc:creator>
	<dc:description xml:lang="en-US">In this research, battery charger based on Photovoltaic (PV) system consists of buck converter as useful PV module interface was fabricated. Since output power of PV module changes quickly due to changing solar radiation, optimization is required. One of the easy and cheap optimization techniques is by implementing Perturb and Observe (P&amp;amp;O) algorithm for controlling switch of the buck converter. The P&amp;amp;O algorithm tracks maximum power point by generating suitable duty cycle for switching of the buck converter. The objective of this paper is to present the experimental proof of the P&amp;amp;O algorithm implementation in optimizing performance of the buck converter. The experimental results prove that the P&amp;amp;O algorithm can optimize the work of the buck converter and support shorter charging time by producing higher output voltage and power.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20540</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i2.pp844-850</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 2: June 2020; 844-850</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20540/13101</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Zainul Abidin, Adharul Muttaqin, Eka Maulana, M. Gilang Ramadhan</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>