Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Study of operating modes of electromagnetic hammer with adjustable impact energy and blow frequency

International Journal of Power Electronics and Drive Systems · Vol. 15 No. 1 (2024) · pp. 64–73

DOI
10.11591/ijpeds.v15.i1.pp64-73
ISSN
2722-256X, 2088-8694
Published
2024-03-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

The current work was designed to study the operating modes of electromagnetic impact mechanism (electromagnetic hammer) comprising idle and working stroke windings that are enclosed in magnetic conductor, and reciprocating ferromagnetic striker. Investigation was conducted by modelling in MATLAB environment and performing verification tests with different hammers. Simulation model of the hammer was derived using experimentally obtained static characteristic curves of flux linkage and thrust force for each of the windings. Results revealed that at maximum working stroke winding voltage-varying idle stroke winding voltage, the impact energy did not change, but the impact frequency varied between 0-187 bpm. At maximum idle stroke winding voltage and working stroke winding voltage ranging between 0 to maximum value, the impact energy varied between 84-360 J, the impact frequency varied between 96-187 bpm. Maximum losses over the working cycle were associated with electric losses in the hammer windings and can be reduced by reducing winding currents through increasing the striker speed. The mathematical model of the current study allowed quantifying energy parameters of the electromagnetic hammer. The impact machine cycle includes three operating modes, each determines the main energy parameters: efficiency, impact energy, and cycle time.

Keywords

Collaboration network of the authors

18 authors · 45 co-authorship links · 8 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Al-Balqa Applied University
  • Irkutsk National Research Technical University
  • Tafila Technical University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Khalaf Y. AlzyoudAffiliation unknown4
Ashraf SamarahAl-Balqa Applied University2
Jawdat S. AlkasassbehAl-Balqa Applied University2
Omar AlbarbarawiAl-Balqa Applied University1
Ghazi QaryoutiAffiliation unknown1
Afaq HiaryAl-Balqa Applied University1
Ameera AmayiraAl-Balqa Applied University1
Hiba AsheeshAl-Balqa Applied University1
Ali DalabeehAl-Balqa Applied University1
Abdallah Ershoud AlzyoudAffiliation unknown1
Hussein Ahmad Al-OfeishatAl-Balqa Applied University1
Farouq M. Al-TaweelAl-Balqa Applied University1
Hisham AlrawashdehTafila Technical University1
Vlademer Е. PavlovIrkutsk National Research Technical University1
Mikhail Pavlovich DunayevIrkutsk National Research Technical University1
Sarfaroz DovudovIrkutsk National Research Technical University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Study of operating modes of electromagnetic hammer with adjustable impact energy and blow frequency</dc:title>
	<dc:creator>Al-Rawashdeh, Ayman Y.</dc:creator>
	<dc:creator>Pavlov, Vlademer E.</dc:creator>
	<dc:subject xml:lang="en-US">electromagnetic hammer; idle stroke winding; position sensors; striker; working stroke winding</dc:subject>
	<dc:description xml:lang="en-US">The current work was designed to study the operating modes of electromagnetic impact mechanism (electromagnetic hammer) comprising idle and working stroke windings that are enclosed in magnetic conductor, and reciprocating ferromagnetic striker. Investigation was conducted by modelling in MATLAB environment and performing verification tests with different hammers. Simulation model of the hammer was derived using experimentally obtained static characteristic curves of flux linkage and thrust force for each of the windings. Results revealed that at maximum working stroke winding voltage-varying idle stroke winding voltage, the impact energy did not change, but the impact frequency varied between 0-187 bpm. At maximum idle stroke winding voltage and working stroke winding voltage ranging between 0 to maximum value, the impact energy varied between 84-360 J, the impact frequency varied between 96-187 bpm. Maximum losses over the working cycle were associated with electric losses in the hammer windings and can be reduced by reducing winding currents through increasing the striker speed. The mathematical model of the current study allowed quantifying energy parameters of the electromagnetic hammer. The impact machine cycle includes three operating modes, each determines the main energy parameters: efficiency, impact energy, and cycle time.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">no supporting</dc:contributor>
	<dc:date>2024-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22571</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v15.i1.pp64-73</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 15, No 1: March 2024; 64-73</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v15.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22571/14400</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Ayman Y. Al-Rawashdeh</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>