Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

MATLAB/Simulink based simulations of KY converter for PV panels powered LED lighting system

International Journal of Power Electronics and Drive Systems · Vol. 10 No. 4 (2019) · pp. 1885–1893

DOI
10.11591/ijpeds.v10.i4.pp1885-1893
ISSN
2722-256X, 2088-8694
Published
2019-12-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

The main objective of this research work is to develop KY conveter topology for renewable energy sources.Solar energy is the readily available and is the cheapest form of energy. It is non-polluting and environment friendly. The development of high static gain DC-DC converters is an important research area due to the crescent demand of this technology for several applications supplied by low DC output voltage power sources. It is used to provide the uninterruptable power supply and battery powered to the system. So here, step-up DC-DC converters based on the KY converter are proposed for LED lighting systems. The proposed topologies present high voltages and high efficiency for low input voltage and high output voltage applications. The simulation results of the proposed topology have been presented using MATLAB/SIMULINK software.

Collaboration network of the authors

11 authors · 19 co-authorship links · 13 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Karpagam Academy of Higher Education
  • AIMST University
  • Jordan University of Science and Technology
  • Anna University, Chennai
  • Birla Institute of Technology and Science, Pilani
  • Birla Institute of Technology and Science, Pilani - Dubai Campus
  • Hashemite University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
C. Arul MuruganKarpagam Academy of Higher Education3
Umasankar UmasankarBirla Institute of Technology and Science, Pilani - Dubai Campus2
Pratap NairAffiliation unknown1
Pavithren PavithrenAIMST University1
Raman Raghu RamanAIMST University1
Fadi Nessir ZghoulJordan University of Science and Technology1
Yousra Hussein Al-BakrawiJordan University of Science and Technology1
Issa EtierHashemite University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">MATLAB/Simulink based simulations of KY converter for PV panels powered LED lighting system</dc:title>
	<dc:creator>Sureshkumaar, G.</dc:creator>
	<dc:creator>Kannan, Nithiyananthan</dc:creator>
	<dc:creator>Thomas, Sunil</dc:creator>
	<dc:description xml:lang="en-US">The main objective of this research work is to develop KY conveter topology for renewable energy sources.Solar energy is the readily available and is the cheapest form of energy. It is non-polluting and environment friendly. The development of high static gain DC-DC converters is an important research area due to the crescent demand of this technology for several applications supplied by low DC output voltage power sources. It is used to provide the uninterruptable power supply and battery powered to the system. So here, step-up DC-DC converters based on the KY converter are proposed for LED lighting systems. The proposed topologies present high voltages and high efficiency for low input voltage and high output voltage applications. The simulation results of the proposed topology have been presented using MATLAB/SIMULINK software.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/18367</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v10.i4.pp1885-1893</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 10, No 4: December 2019; 1885-1893</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v10.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/18367/12918</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 G. Sureshkumaar, Nithiyananthan Kannan, Sunil Thomas</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>