Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Improvise 3-Level DTC of Induction Machine using Constant Switching Frequency Method by Utilizing Multiband Carrier

International Journal of Power Electronics and Drive Systems · Vol. 7 No. 3 (2016) · pp. 638–647

DOI
10.11591/ijpeds.v7.i3.pp638-647
ISSN
2722-256X, 2088-8694
Published
2016-09-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper presents the advantage of using optimal PI parameter tuning strategy of constant switching method in the three phase Direct torque control (DTC) scheme. The DTC system is known to offer fast decoupled control of torque and flux via a simple control structure. Nevertheless, DTC system has two major drawbacks, which are the variable inverter switching frequency and high torque output ripple. The major factorthat contributes to these problems the usage of hysteresis based comparators to control the output torque. The implementation of PI based constant switching method in DTC able to solve these problems while retaining the simple control structure of conventional DTC. The combination usage of 3-level CHMI in this system can further minimize the output torque ripple by providing greater number of vectors. This paper presents detail explanation and calculationof optimal PI parameter tuning strategyconsecutively to enhance the performance of 3-level DTC system. In order to validate the feasibility, the proposed method compared with convention DTC system via simulation and experiment results.

Collaboration network of the authors

40 authors · 105 co-authorship links · 35 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Universitas Ahmad Dahlan
  • Islamic Azad University, Tehran
  • Diponegoro University
  • Universiti Malaysia Perlis
  • Universiti Sains Malaysia
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Auzani JidinUniversiti Teknikal Malaysia Melaka34
Nik Rumzi Nik IdrisUniversity of Technology Malaysia18
Mohammad JannatiUniversity of Technology Malaysia16
Mohd Hatta JopriUniversiti Teknikal Malaysia Melaka15
Awang JusohUniversity of Technology Malaysia15
Nik Rumzi Nik IdrisAffiliation unknown14
Mohd Junaidi Abdul AzizUniversity of Technology Malaysia10
Mustafa ManapUniversiti Teknikal Malaysia Melaka10
Kasrul Abdul KarimAffiliation unknown9
Lina HandayaniUniversitas Ahmad Dahlan8
Mohamed SalemUniversiti Sains Malaysia8
Mahmoud ZadehbagheriIslamic Azad University, Tehran8
Abdul Rahim AbdullahUniversiti Teknikal Malaysia Melaka6
Mochammad FactaDiponegoro University6
Mohammad Javad KianiIslamic Azad University, Tehran5
Shahreen KasimAffiliation unknown5
Watra ArsadiandoAffiliation unknown5
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis5
Mohd Junaidi Abdul AzizAffiliation unknown5
Imam Much Ibnu SubrotoSultan Agung Islamic University4
M. Rahimi YusoffUniversiti Teknikal Malaysia Melaka4
Muhammad AdoUniversity of Technology Malaysia4
Hendril Satrian PurnamaAffiliation unknown4
Anggit PamungkasAffiliation unknown4
Vahdat NazerianUniversity of Mazandaran4
Muhammad Zaid AihsanUniversiti Malaysia Perlis4
Chibuike Peter OhanuUniversity of Nigeria4
Tri WahonoAffiliation unknown4
Rahim IldarabadiAffiliation unknown4
Azralmukmin AzmiAffiliation unknown4
Shahrin Md AyobAffiliation unknown4
Siti Azura Ahmad TarusanAffiliation unknown4
Ibrahim AlhamrouniAffiliation unknown4
Aiman Zakwan JidinAffiliation unknown4
Munawar Agus RiyadiDiponegoro University3
Deris StiawanSriwijaya University3

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Improvise 3-Level DTC of Induction Machine using Constant Switching Frequency Method by Utilizing Multiband Carrier</dc:title>
	<dc:creator>Ramahlingam, Sundram a/l</dc:creator>
	<dc:creator>Jidin, Auzani Bin</dc:creator>
	<dc:creator>Sutikno, Tole</dc:creator>
	<dc:creator>Raj, L. Logan</dc:creator>
	<dc:description xml:lang="en-US">This paper presents the advantage of using optimal PI parameter tuning strategy of constant switching method in the three phase Direct torque control (DTC) scheme. The DTC system is known to offer fast decoupled control of torque and flux via a simple control structure. Nevertheless, DTC system has two major drawbacks, which are the variable inverter switching frequency and high torque output ripple. The major factorthat contributes to these problems the usage of hysteresis based comparators to control the output torque. The implementation of PI based constant switching method in DTC able to solve these problems while retaining the simple control structure of conventional DTC. The combination usage of 3-level CHMI in this system can further minimize the output torque ripple by providing greater number of vectors. This paper presents detail explanation and calculationof optimal PI parameter tuning strategyconsecutively to enhance the performance of 3-level DTC system. In order to validate the feasibility, the proposed method compared with convention DTC system via simulation and experiment results.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2016-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5246</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v7.i3.pp638-647</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 7, No 3: September 2016; 638-647</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v7.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5246/5469</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 Sundram a/l Ramahlingam, Auzani Bin Jidin, Tole Sutikno, L. Logan Raj</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>