Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Optimization of double stator PMSM with different slot number in inner and outer stators using genetic algorithm

International Journal of Power Electronics and Drive Systems · Vol. 12 No. 2 (2021) · pp. 726–735

DOI
10.11591/ijpeds.v12.i2.pp726-735
ISSN
2722-256X, 2088-8694
Published
2021-06-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper describes the performance enhancement of double stator permanent magnet synchronous machines (DS-PMSM) based on genetic algorithm optimization (GAO). Generally, throughout the development stage, an analytical calculation is implemented to build the initial model of the DS-PMSM since the analytical calculation can provide the initial parameters based on the types and materials used in the machine design. For further improvement, GAO might potentially be applied to provide the optimization technique in searching the optimal motor parameters iteratively and intelligently with specific objective functions. For this aim, a three-phase, DS-PMSM with different number of slots between the outer and inner stators is first designed by using analytical parameter estimation and then later optimized by GAO. The outer and inner stators have 12-slots and 9-slots respectively, while, the rotor carries 10 magnetic poles. Four main input motor parameters, i.e. outer stator slot opening, outer magnet pole arc, inner stator slot opening and inner magnet pole arc are varied and optimized to achieve the design objective functions, i.e. high output torque, low torque ripple, low cogging torque and low total harmonic distortion (THDv). The results from the optimized GAO are compared with the initial motor model and further validated by finite element method (FEM). The results show a good agreement between GAO and FEM. GAO has achieved very significant improvements in enhancing the machine performance.

Keywords

Collaboration network of the authors

23 authors · 61 co-authorship links · 27 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Sains Malaysia
  • University of Kuala Lumpur
  • Universiti Malaysia Perlis
  • Universitas Ahmad Dahlan
  • National University of Malaysia
  • Northern Technical University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Tole SutiknoUniversitas Ahmad Dahlan2
Auzani JidinUniversiti Teknikal Malaysia Melaka2
S. FarinaUniversiti Teknikal Malaysia Melaka2
R. N. FirdausUniversiti Teknikal Malaysia Melaka2
Mohamed SalemUniversiti Sains Malaysia2
Liong Han WenUniversity of Kuala Lumpur1
Taha Ahmad HusseinAffiliation unknown1
F. AzharUniversiti Teknikal Malaysia Melaka1
Maaspaliza AzriUniversiti Teknikal Malaysia Melaka1
R. SuhairiUniversiti Teknikal Malaysia Melaka1
Muhammad Ammirrul Atiqi Mohd ZainuriNational University of Malaysia1
Chanuri CharinUniversiti Sains Malaysia1
Taha Ahmed HusseinNorthern Technical University1
Jawad Hasan AlkhateebPrince Mohammad bin Fahd University1
M. RezalUniversity of Kuala Lumpur1
Mohamad Nazir AbdullahUniversiti Sains Malaysia1
Musa Mohammed GujjaUniversiti Sains Malaysia1
Muhammad Najwan HamidiUniversiti Sains Malaysia1
Khalil AlluhaybiTaibah University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Optimization of double stator PMSM with different slot number in inner and outer stators using genetic algorithm</dc:title>
	<dc:creator>Ahmad, Mohd Saufi</dc:creator>
	<dc:creator>Ishak, Dahaman</dc:creator>
	<dc:creator>Leong, Tiang Tow</dc:creator>
	<dc:creator>Mohamed, Mohd Rezal</dc:creator>
	<dc:subject xml:lang="en-US">Double-stator; Fractional motor; GA optimization; Permanent magnet; Synchronous motor</dc:subject>
	<dc:description xml:lang="en-US">This paper describes the performance enhancement of double stator permanent magnet synchronous machines (DS-PMSM) based on genetic algorithm optimization (GAO). Generally, throughout the development stage, an analytical calculation is implemented to build the initial model of the DS-PMSM since the analytical calculation can provide the initial parameters based on the types and materials used in the machine design. For further improvement, GAO might potentially be applied to provide the optimization technique in searching the optimal motor parameters iteratively and intelligently with specific objective functions. For this aim, a three-phase, DS-PMSM with different number of slots between the outer and inner stators is first designed by using analytical parameter estimation and then later optimized by GAO. The outer and inner stators have 12-slots and 9-slots respectively, while, the rotor carries 10 magnetic poles. Four main input motor parameters, i.e. outer stator slot opening, outer magnet pole arc, inner stator slot opening and inner magnet pole arc are varied and optimized to achieve the design objective functions, i.e. high output torque, low torque ripple, low cogging torque and low total harmonic distortion (THDv). The results from the optimized GAO are compared with the initial motor model and further validated by finite element method (FEM). The results show a good agreement between GAO and FEM. GAO has achieved very significant improvements in enhancing the machine performance.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Universiti Sains Malaysia</dc:contributor>
	<dc:date>2021-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21181</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v12.i2.pp726-735</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 12, No 2: June 2021; 726-735</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v12.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21181/13395</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Mohd Saufi Ahmad, Dahaman Ishak, Tiang Tow Leong, Mohd Rezal Mohamed</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>