Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Battery integrated three input high gain DC-DC converter for renewable energy sources

International Journal of Power Electronics and Drive Systems · Vol. 16 No. 2 (2025) · pp. 1024–1037

DOI
10.11591/ijpeds.v16.i2.pp1024-1037
ISSN
2722-256X, 2088-8694
Published
2025-06-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

In this work, a battery-integrated three-input converter is proposed. The topology combines a traditional boost converter on one side with a non-coupled inductor-based buffer stage on the other side. Some merits of the converter are a high voltage gain, a high output voltage in the battery discharging mode, and a wide range of output voltage. The bidirectional port makes it attractive for renewable energy (RE) sources like solar and fuel cells. The converter can operate in three modes that are determined by the availability of RE sources and the battery state of charge (SOC). The power management algorithm enabled the converter to work in either single-input, double-input, or three-input configurations. The duty ratios of assigned power switches controlled the output voltage and the battery charge/discharge. Steady-state analyses and dynamic modeling are presented and discussed. At 12 V and 24 V input voltage, the output voltage of 315.52 V was delivered in the battery-excluded mode. The battery discharging mode delivered 311.57 V while the battery charging mode delivered 301.32 V. The proposed converter can serve low to medium power voltage/power applications. The hardware experiments verify the workings of the proposed converter.

Keywords

Collaboration network of the authors

38 authors · 129 co-authorship links · 66 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Malaysia Sarawak
  • Tun Hussein Onn University of Malaysia
  • University of Tabuk
  • Guangxi University
  • University of Technology Malaysia
  • Xiamen University Malaysia
  • Swinburne University of Technology
  • Other organisations
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Hamimah Binti UjirUniversiti Malaysia Sarawak2
Hashimatul Fatma HashimUniversiti Malaysia Sarawak2
Wahyu Mulyo UtomoTun Hussein Onn University of Malaysia2
Saad MekhilefSwinburne University of Technology2
Jye Yun FamUniversiti Malaysia Sarawak2
Shen Yuong WongXiamen University Malaysia2
Mohammad Omar AbdullahUniversiti Malaysia Sarawak2
Ade Syaheda Wani MarzukiUniversiti Malaysia Sarawak1
Aidil Azli AliasUniversiti Malaysia Sarawak1
Rohana SapawiUniversiti Malaysia Sarawak1
Afarulrazi Abu BakarTun Hussein Onn University of Malaysia1
B. E. PrasetyoPoliteknik Negeri Malang1
H. ElmunsyahState University of Malang1
N. A. A. IsaTun Hussein Onn University of Malaysia1
A. F. H. A. GaniTun Hussein Onn University of Malaysia1
Goh Hui HwangGuangxi University1
Siong Kai ChienTun Hussein Onn University of Malaysia1
Nor Aira ZambriTun Hussein Onn University of Malaysia1
Alvin John Lim Meng SiangTun Hussein Onn University of Malaysia1
Kah Haw LawCurtin University1
Sim Sy YiTun Hussein Onn University of Malaysia1
Sim Gia YiGuangxi University1
Hassan Wedaa El-RabUniversity of Tabuk1
Hani A. AlbalawiUniversity of Tabuk1
Sherif Ahmed ZaidCairo University1
Abderrahim LakhouitUniversity of Tabuk1
Muhammed Ayas ArshadUniversity of Tabuk1
Tole SutiknoUniversitas Ahmad Dahlan1
Nik Rumzi Nik IdrisUniversity of Technology Malaysia1
Awang JusohUniversity of Technology Malaysia1
Mohamed SalemUniversiti Sains Malaysia1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, first harvested 8 Nov 2026, last seen 8 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Battery integrated three input high gain DC-DC converter for renewable energy sources</dc:title>
	<dc:creator>Affam, Azuka</dc:creator>
	<dc:creator>Buswig, Yonis M. Yonis</dc:creator>
	<dc:creator>Othman, Al-Khalid</dc:creator>
	<dc:creator>Salleh, Shanti Faridah</dc:creator>
	<dc:creator>Basri, Hazrul Mohamed</dc:creator>
	<dc:creator>Julai, Norhuzaimin</dc:creator>
	<dc:creator>Lias, Kasumawati</dc:creator>
	<dc:subject xml:lang="en-US">Boost converter; high gain; multiple input; non-coupled inductor; renewable energy</dc:subject>
	<dc:description xml:lang="en-US">In this work, a battery-integrated three-input converter is proposed. The topology combines a traditional boost converter on one side with a non-coupled inductor-based buffer stage on the other side. Some merits of the converter are a high voltage gain, a high output voltage in the battery discharging mode, and a wide range of output voltage. The bidirectional port makes it attractive for renewable energy (RE) sources like solar and fuel cells. The converter can operate in three modes that are determined by the availability of RE sources and the battery state of charge (SOC). The power management algorithm enabled the converter to work in either single-input, double-input, or three-input configurations. The duty ratios of assigned power switches controlled the output voltage and the battery charge/discharge. Steady-state analyses and dynamic modeling are presented and discussed. At 12 V and 24 V input voltage, the output voltage of 315.52 V was delivered in the battery-excluded mode. The battery discharging mode delivered 311.57 V while the battery charging mode delivered 301.32 V. The proposed converter can serve low to medium power voltage/power applications. The hardware experiments verify the workings of the proposed converter.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">RIEC, Universiti Malaysia Sarawak (UNIMAS)</dc:contributor>
	<dc:date>2025-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23500</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v16.i2.pp1024-1037</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 16, No 2: June 2025; 1024-1037</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v16.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23500/14937</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Azuka Affam, Yonis M. Yonis Buswig, Al-Khalid Hj Othman, Shanti Farida Salleh, Hazrul Mohamed Basri, Norhuzaimin Julai, Kasumawati Lias</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>