Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Low-noise amplifier with pre-distortion architecture for ultra-wide band application in radio frequency

International Journal of Reconfigurable and Embedded Systems (IJRES) · Vol. 14 No. 1 (2025) · pp. 208–220

DOI
10.11591/ijres.v14.i1.pp208-220
ISSN
2722-2608, 2089-4864
Published
2025-03-01
Publisher
Institute of Advanced Engineering and Science
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Ultra-wide band (UWB) is a wireless technology deployed for transmitting data at high rates over short distances. Similar to Wi-Fi and Bluetooth, UWB is a radio frequency (RF) technology that operates via radio waves. To remove minor noise and glitches, low noise amplifier (LNA) is required because it amplifies weak signals without significantly adding noise. However, UWB has multiple frequencies that require coefficient change due to frequency variations. When low-pass filter (LPF) is employed to solve this, updates are necessary to manage delay and power because the LPF feedback is connected to LNA to increase delay and power consumption. In this research, LNA with a pre-distortion architecture is proposed to remove minor noises and small glitches. It is processed by using pre-distortion as an active component which reduces delay and power consumption in UWB. The pre-distortion process operates in the subthreshold voltage range by providing a transistor to each frequency as input, inturn effectively reducing the noise. The proposed LNA with pre-distortion architecture is developed on 180-nm complementary metal-oxide semiconductor (CMOS) technology using Cadense ASIC tool. The proposed architecture achieves a noise figure (NF) of 2.16 dB and less power consumption of 43.06×10-6 W when compared to the existing techniques namely, cascade amplifiers, W-band LNA, reflectionless receiver (RX), and broadband RF receiver front-end circuits.

Keywords

Collaboration network of the authors

7 authors · 16 co-authorship links · 9 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Nitte Meenakshi Institute of Technology
  • Ballari Institute of Technology & Management
  • Universidad de Jaén
  • Central University of Karnataka
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Abdul Lateef Haroon P SBallari Institute of Technology & Management1
Sowmya MadhavanNitte Meenakshi Institute of Technology1
Rocío Pérez de PradoUniversidad de Jaén1
S. P. ParameshCentral University of Karnataka1
Kavitha Malali Vishveshwarappa GowdaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://ijres.iaescore.com/index.php/IJRES/oai, first harvested 8 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Low-noise amplifier with pre-distortion architecture for ultra-wide band application in radio frequency</dc:title>
	<dc:creator>Siddanna, Pradeep Kumar</dc:creator>
	<dc:creator>Divakarachari, Parameshachari Bidare</dc:creator>
	<dc:subject xml:lang="en-US">Complementary metal-oxide semiconductor technology; LNA with pre-distortion; Low-pass filter; Noise figure; Radio frequency; Ultra wide band</dc:subject>
	<dc:description xml:lang="en-US">Ultra-wide band (UWB) is a wireless technology deployed for transmitting data at high rates over short distances. Similar to Wi-Fi and Bluetooth, UWB is a radio frequency (RF) technology that operates via radio waves. To remove minor noise and glitches, low noise amplifier (LNA) is required because it amplifies weak signals without significantly adding noise. However, UWB has multiple frequencies that require coefficient change due to frequency variations. When low-pass filter (LPF) is employed to solve this, updates are necessary to manage delay and power because the LPF feedback is connected to LNA to increase delay and power consumption. In this research, LNA with a pre-distortion architecture is proposed to remove minor noises and small glitches. It is processed by using pre-distortion as an active component which reduces delay and power consumption in UWB. The pre-distortion process operates in the subthreshold voltage range by providing a transistor to each frequency as input, inturn effectively reducing the noise. The proposed LNA with pre-distortion architecture is developed on 180-nm complementary metal-oxide semiconductor (CMOS) technology using Cadense ASIC tool. The proposed architecture achieves a noise figure (NF) of 2.16 dB and less power consumption of 43.06×10-6 W when compared to the existing techniques namely, cascade amplifiers, W-band LNA, reflectionless receiver (RX), and broadband RF receiver front-end circuits.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">I have not received any fund from any organization.</dc:contributor>
	<dc:date>2025-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijres.iaescore.com/index.php/IJRES/article/view/21408</dc:identifier>
	<dc:identifier>10.11591/ijres.v14.i1.pp208-220</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Reconfigurable and Embedded Systems (IJRES); Vol 14, No 1: March 2025; 208-220</dc:source>
	<dc:source>2722-2608</dc:source>
	<dc:source>2089-4864</dc:source>
	<dc:source>10.11591/ijres.v14.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijres.iaescore.com/index.php/IJRES/article/view/21408/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Institute of Advanced Engineering and Science (IAES)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>