Journal
SINTA 1
Modification of Load Calculation in The Dijkstra Algorithm to Achieve High Throughput and Low Latency on 5G Networks
Journal of Applied Engineering and Technological Science (JAETS) · Vol. 5 No. 2 (2024) · pp. 1182–1198
ISSN 2715-6079, 2715-6087
Published 2024-06-06
Publisher Yayasan Riset dan Pengembangan Intelektual (YRPI)
Language en
Abstract
throughput for high-resolution remote video surveillance. 5G cellular network as today's most advanced wireless technology will be the perfect match for Agriculture 4.0 requirements. In its maturity process, the 5G network requires various optimizations, one of which is by making route algorithm calculation modifications in terms of determining the best route for a data packet from a data source to a data destination. To achieve this goal, it requires research in the form of experiments using network simulator. Software Define Network (SDN) as network programmability is used to modify route in Dijkstra algorithm calculation, and run several use case that simulate 5G network characteristic. By adding bandwidth utilization and latency parameters into the routing algorithm calculations, 5G requirements such as packet loss below 1% and latency below 5ms are successfully achieved. These positive results may be further tested on real 5G networks, if in the future this research also gets positive results in testing on a real 5G network, then cellular network customers will be able to experience an increase in service quality.
Collaboration network of the authors
20 authors ·
38 co-authorship links
· 2 across different organisations
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
IPB University National Research and Innovation Agency Affiliation unknown
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Show as table
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.
Metadata source: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, first harvested 9 Nov 2026, last seen 9 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Modification of Load Calculation in The Dijkstra Algorithm to Achieve High Throughput and Low Latency on 5G Networks</dc:title>
<dc:creator xml:lang="en">Adiyanto, Eko Kuncoro</dc:creator>
<dc:creator xml:lang="en">Wahjuni, Sri</dc:creator>
<dc:creator xml:lang="en">Rahmawan, Hendra</dc:creator>
<dc:subject xml:lang="en">5G</dc:subject>
<dc:subject xml:lang="en">Bandwidth</dc:subject>
<dc:subject xml:lang="en">Dijkstra</dc:subject>
<dc:subject xml:lang="en">Latency</dc:subject>
<dc:subject xml:lang="en">Software Defined Network</dc:subject>
<dc:description xml:lang="en">throughput for high-resolution remote video surveillance. 5G cellular network as today's most advanced wireless technology will be the perfect match for Agriculture 4.0 requirements. In its maturity process, the 5G network requires various optimizations, one of which is by making route algorithm calculation modifications in terms of determining the best route for a data packet from a data source to a data destination. To achieve this goal, it requires research in the form of experiments using network simulator. Software Define Network (SDN) as network programmability is used to modify route in Dijkstra algorithm calculation, and run several use case that simulate 5G network characteristic. By adding bandwidth utilization and latency parameters into the routing algorithm calculations, 5G requirements such as packet loss below 1% and latency below 5ms are successfully achieved. These positive results may be further tested on real 5G networks, if in the future this research also gets positive results in testing on a real 5G network, then cellular network customers will be able to experience an increase in service quality.</dc:description>
<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
<dc:date>2024-06-06</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/4705</dc:identifier>
<dc:identifier>10.37385/jaets.v5i2.4705</dc:identifier>
<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 5 No. 2 (2024): Journal of Applied Engineering and Technological Science (JAETS); 1182-1198</dc:source>
<dc:source>2715-6079</dc:source>
<dc:source>2715-6087</dc:source>
<dc:source>10.37385/jaets.v5i2</dc:source>
<dc:language>en</dc:language>
<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/4705/2942</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2024 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>
Citations and indexing
OpenAlex
Not checked
Crossref
Not checked
Cite this article
APA 7
Adiyanto, E. K., Wahjuni, S., & Rahmawan, H. (2024). Modification of Load Calculation in The Dijkstra Algorithm to Achieve High Throughput and Low Latency on 5G Networks. Journal of Applied Engineering and Technological Science (JAETS), 5(2), 1182–1198. https://doi.org/10.37385/jaets.v5i2.4705
Copy
IEEE
E. K. Adiyanto, S. Wahjuni, and H. Rahmawan, “Modification of Load Calculation in The Dijkstra Algorithm to Achieve High Throughput and Low Latency on 5G Networks,” Journal of Applied Engineering and Technological Science (JAETS), vol. 5, no. 2, pp. 1182–1198, 2024, doi: 10.37385/jaets.v5i2.4705.
Copy
Generated from the journal's metadata; check author names before use.