Melola Discovery

← Melola Discovery

Journal SINTA 1

Design of Comprehensive Monitoring on Hybrid Photovoltaic and Thermoelectric Generator Using IoT

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 6 No. 1 (2024) · pp. 238–248

DOI
10.37385/jaets.v6i1.5764
ISSN
2715-6079, 2715-6087
Published
2024-12-15
Publisher
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Language
en

Abstract

The study aims to design and develop a more efficient measurement monitoring system based on influential parameters for the performance of hybrid PV and TEG modules using IoT with the Thingspeak application. The parameters measured include the PV top and bottom surface temperatures and output current and voltage, the surface temperatures of the TEG's hot and cold sides, their respective current and voltage outputs, air humidity, and solar intensity. This IoT-based monitoring system experimental method utilizes two types of PV, polycrystalline and monocrystalline, each rated at 50 Wp, in a hybrid configuration with 5 TEG modules attached to the back of the solar panel. The monitoring design results indicate that sensor measurements were accurate and data readings were reliable. The temperature difference between the two sides of the TEG was measured up to 21.7°C, and the hybrid efficiency of the monocrystalline PV with TEG showed better results compared to the polycrystalline setup, achieving optimum efficiency above 6%, with the PV surface temperature maintained at an average of 50°C. Additionally, IoT monitoring revealed the effect of air humidity on TEG performance: lower air humidity resulted in a larger?T, peaking at 21.7°C with humidity at 39.1%. Therefore, this study recommends using IoT technology for observational data collection on system performance, particularly for PV and TEG, with sensor component modifications tailored to the characteristics of the targeted sensor object.

Keywords

Collaboration network of the authors

40 authors · 144 co-authorship links · 52 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Tadulako University
  • Politeknik Negeri Ujung Pandang
  • Universitas Halu Oleo
  • Janabadra University
  • IPB University
  • State University of Makassar
  • Institut Agama Islam Negeri Langsa
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Nirmala Efri HasibuanAffiliation unknown3
Aulia AzkaIPB University3
Basri BasriAffiliation unknown2
Aulia AzkaAffiliation unknown2
Sumartini SumartiniState University of Semarang2
Putri Wening RatriniaIPB University2
Sumartini SumartiniAffiliation unknown2
Muh SuryonoAffiliation unknown2
Luchiandini Ika PamaharyaniAffiliation unknown2
Windu GataUniversitas Nusa Mandiri1
Risnandar RisnandarIndonesian Institute of Sciences1
Muhira Dzar FarabyPoliteknik Negeri Ujung Pandang1
Sofyan SofyanPoliteknik Negeri Ujung Pandang1
Sarma ThahaPoliteknik Negeri Ujung Pandang1
Musfirah Putri LukmanPoliteknik Negeri Ujung Pandang1
Asma AmaliahPoliteknik Negeri Ujung Pandang1
Mustika MustikaUniversitas Halu Oleo1
Mochammad Apriyadi Hadi SiradKhairun University1
Anisya SonitaUniversitas Muhammadiyah Bengkulu1
Muhammad Syariffuddien ZuhriUniversitas Syiah Kuala1
Wempy BangaUniversitas Halu Oleo1
Muhammad AmirUniversitas Halu Oleo1
Tri WahyuningsihTadulako University1
KhairinrahmatTadulako University1
Muhammad BakriTadulako University1
Yuli Asmi RahmanTadulako University1
BakriTadulako University1
Rizaldi MaadjiTadulako University1
Chairunnisa Ar LamasitudjuTadulako University1
Ferri KuswantoroJanabadra University1
Yayuk AprianiJanabadra University1
Burhanudin BurhanudinJanabadra University1
Mohammad TakdirUniversitas Annuqayah1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, first harvested 9 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Design of Comprehensive Monitoring on Hybrid Photovoltaic and Thermoelectric Generator Using IoT</dc:title>
	<dc:creator xml:lang="en">Rahman, Yuli Asmi</dc:creator>
	<dc:creator xml:lang="en">Adam, Andi Arham</dc:creator>
	<dc:creator xml:lang="en">Samnur, Samnur</dc:creator>
	<dc:creator xml:lang="en">Basri, Basri</dc:creator>
	<dc:creator xml:lang="en">Anwar, Khairil</dc:creator>
	<dc:creator xml:lang="en">Hatib, Rustan</dc:creator>
	<dc:creator xml:lang="en">Mustofa, Mustofa</dc:creator>
	<dc:subject xml:lang="en">Thingspeak-Blynk</dc:subject>
	<dc:subject xml:lang="en">Iot Monitoring</dc:subject>
	<dc:subject xml:lang="en">Hibrid PV-TEG</dc:subject>
	<dc:subject xml:lang="en">Measurement Sensor</dc:subject>
	<dc:description xml:lang="en">The study aims to design and develop a more efficient measurement monitoring system based on influential parameters for the performance of hybrid PV and TEG modules using IoT with the Thingspeak application. The parameters measured include the PV top and bottom surface temperatures and output current and voltage, the surface temperatures of the TEG's hot and cold sides, their respective current and voltage outputs, air humidity, and solar intensity. This IoT-based monitoring system experimental method utilizes two types of PV, polycrystalline and monocrystalline, each rated at 50 Wp, in a hybrid configuration with 5 TEG modules attached to the back of the solar panel. The monitoring design results indicate that sensor measurements were accurate and data readings were reliable. The temperature difference between the two sides of the TEG was measured up to 21.7°C, and the hybrid efficiency of the monocrystalline PV with TEG showed better results compared to the polycrystalline setup, achieving optimum efficiency above 6%, with the PV surface temperature maintained at an average of 50°C. Additionally, IoT monitoring revealed the effect of air humidity on TEG performance: lower air humidity resulted in a larger ?T, peaking at 21.7°C with humidity at 39.1%. Therefore, this study recommends using IoT technology for observational data collection on system performance, particularly for PV and TEG, with sensor component modifications tailored to the characteristics of the targeted sensor object.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2024-12-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/5764</dc:identifier>
	<dc:identifier>10.37385/jaets.v6i1.5764</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 6 No. 1 (2024): Journal of Applied Engineering and Technological Science (JAETS); 238-248</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v6i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/5764/3688</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>