Melola Discovery

← Melola Discovery

Journal SINTA 1

Synthesis of Biokerosene through Electrochemical Hydrogenation of Terpene Hydrocarbons from Turpentine Oil

Journal of Engineering and Technological Sciences · Vol. 48 No. 6 (2016) · pp. 655–664

DOI
10.5614/j.eng.technol.sci.2016.48.6.2
ISSN
2338-5502, 2337-5779
Published
2016-12-30
Publisher
Directorate for Research and Community Services, Institut Teknologi Bandung
Language
eng

Abstract

Indonesia possesses great potential for developing renewable resources as alternative fuels. For example, turpentine oil obtained from Pinus merkusii, which contains mostly monoterpene hydrocarbons (C10H16). The oil is highly suitable to be processed for biokerosene or even jet biofuel. It consists of hydrocarbons within the range of C10 to C15. However, it contains insufficient H and thus needs to be upgraded. In the present work, electrochemical hydrogenation was used for upgrading. In the electrochemical cell, stainless steel, silver, and carbon were used alternately for the anode, while copper and silver Raschig rings were used for the cathode. An electrolyte solution of cuprous ammonium formate was utilized not only as a source of H but also to draw the unsaturated hydrocarbons into the aqueous phase. The electrolyte: oil ratio (up to 2:1), electrolyte concentration (between 0.4 and 2 M) and reaction time were varied throughout the experiments. The bromine number (unsaturation level) of the turpentine oil, which was initially 1,86 (mole Br2/mole), was lowered significantly to 0.69-0.90. Promising increase of smoke point values were observed from 11 mm to 16-24 mm, indicating a higher H content of the processed oil, thus making it suitable as a substitute for petroleum kerosene.

Collaboration network of the authors

25 authors · 80 co-authorship links · 18 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Bandung Institute of Technology
  • Parahyangan Catholic University
  • Artha Wacana Christian University
  • Diponegoro University
  • Universitas Gadjah Mada
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Tirto PrakosoBandung Institute of Technology3
Godlief F. NeonufaArtha Wacana Christian University2
Endar PuspawiningtiyasBandung Institute of Technology2
Meiti PratiwiBandung Institute of Technology2
Michael GunawanParahyangan Catholic University2
Widayat WidayatDiponegoro University1
Johnner Parningotan SitompulBandung Institute of Technology1
I Gusti Bagus Ngurah MakertiharthaBandung Institute of Technology1
Antonius IndartoBandung Institute of Technology1
Yano Surya PradanaUniversitas Gadjah Mada1
Alif Kembara AlamBandung Institute of Technology1
Subagjo SubagjoBandung Institute of Technology1
Ronny PurwadiBandung Institute of Technology1
Lidya ElizabethBandung Institute of Technology1
Astri Nur IstyamiBandung Institute of Technology1
Jenny RizkianaBandung Institute of Technology1
Hary DeviantoBandung Institute of Technology1
Wibawa Hendra SaputeraBandung Institute of Technology1
Dzaky AuliardiAffiliation unknown1
Aghietyas Choirun Az ZahraAffiliation unknown1
Francesco ThadeoAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, first harvested 9 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Synthesis of Biokerosene through Electrochemical Hydrogenation of Terpene Hydrocarbons from Turpentine Oil</dc:title>
	<dc:creator>Hudaya, Tedi</dc:creator>
	<dc:creator>Widjaja, Ongky</dc:creator>
	<dc:creator>Rionardi, Antonius</dc:creator>
	<dc:creator>Soerawidjaja, Tatang Hernas</dc:creator>
	<dc:description xml:lang="en-US">Indonesia possesses great potential for developing renewable resources as alternative fuels. For example, turpentine oil obtained from Pinus merkusii, which contains mostly monoterpene hydrocarbons (C10H16). The oil is highly suitable to be processed for biokerosene or even jet biofuel. It consists of hydrocarbons within the range of C10 to C15. However, it contains insufficient H and thus needs to be upgraded. In the present work, electrochemical hydrogenation was used for upgrading. In the electrochemical cell, stainless steel, silver, and carbon were used alternately for the anode, while copper and silver Raschig rings were used for the cathode. An electrolyte solution of cuprous ammonium formate was utilized not only as a source of H but also to draw the unsaturated hydrocarbons into the aqueous phase. The electrolyte : oil ratio (up to 2:1), electrolyte concentration (between 0.4 and 2 M) and reaction time were varied throughout the experiments. The bromine number (unsaturation level) of the turpentine oil, which was initially 1,86 (mole Br2/mole), was lowered significantly to 0.69-0.90. Promising increase of smoke point values were observed from 11 mm to 16-24 mm, indicating a higher H content of the processed oil, thus making it suitable as a substitute for petroleum kerosene.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2016-12-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/3588</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2016.48.6.2</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 48 No. 6 (2016); 655-664</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/3588/1893</dc:relation>
</oai_dc:dc>