Melola Discovery

← Melola Discovery

Journal SINTA 1

Development of Instant Microbial Starter for Production of Fermented Cassava Flour: Effect of Vacuum Drying Temperature, Carrier Media, and Storage Temperature

Journal of Engineering and Technological Sciences · Vol. 50 No. 6 (2018) · pp. 832–840

DOI
10.5614/j.eng.technol.sci.2018.50.6.6
ISSN
2338-5502, 2337-5779
Published
2018-12-31
Publisher
Directorate for Research and Community Services, Institut Teknologi Bandung
Language
eng

Abstract

Cassava is an important crop for tropical countries such as Nigeria, Brazil, Thailand, and Indonesia. The potential utilization of cassava in the food industry can be enhanced by processing cassava into fermented cassava flour (fercaf), which has been shown to have a neutral color and aroma as well as low cyanogenic content. The use of specific microbial starter in the cassava chip fermentation for fercaf production will direct the fermentation process, maintaining a high quality of the produced flour. Thereby, the availability of an easy-to-use microbial starter is important for the production of fermented cassava flour. The aim of this study was to evaluate vacuum drying methods in the preparation of microbial starter for fermented cassava flour production. In particular, the effects of carrier media, drying and storage temperature on cell viability in dry starter were tested. The results showed that different methods should be applied to different microbial species. Bacillus subtilis and Aspergillus Oryza should be prepared using fercaf as the carrier media at a drying temperature of 55 °C, whereas Lactobacillus plantarum starter should be prepared using skim milk as the carrier media at a drying temperatur of 40°C. Apart from B. subtilis, the starters should be stored in a refrigerator.

Keywords

Collaboration network of the authors

40 authors · 98 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Bandung Institute of Technology
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Tjandra SetiadiBandung Institute of Technology4
Anton IrawanAffiliation unknown3
Yogi Wibisono BudhiAffiliation unknown3
S. SubagjoAffiliation unknown3
Teguh KurniawanAffiliation unknown2
Hafid AlwanAffiliation unknown2
Tjokorde Walmiki SamadhiAffiliation unknown2
M. EffendyAffiliation unknown2
Yogi W. BudhiAffiliation unknown2
Vita WonoputriAffiliation unknown2
Endang WarsikiAffiliation unknown1
Elfa Susanti ThamrinAffiliation unknown1
Ono SuparnoAffiliation unknown1
Asep Bayu Dani NandiyantoAffiliation unknown1
Darisman DarismanAffiliation unknown1
Dina PujiantiAffiliation unknown1
Muhammad Saifullah Abu BakarAffiliation unknown1
Subiantoro SubiantoroAffiliation unknown1
Ronny PurwadiAffiliation unknown1
I. G. B. N. MakertiharthaAffiliation unknown1
Ibnu Maulana HidayatullahAffiliation unknown1
Khairul Hadi BurhanAffiliation unknown1
Noviani Arifina IstiqomahAffiliation unknown1
Rendy MuktiAffiliation unknown1
Aprilina PurbasariAffiliation unknown1
Luqman BuchoriAffiliation unknown1
IGBN MakertiharthaAffiliation unknown1
M. Dani SupardanAffiliation unknown1
N. A. SutrisniningrumAffiliation unknown1
D. SantianiAffiliation unknown1
WAHONO SUMARYONOAffiliation unknown1
Achmad RoesyadiAffiliation unknown1
Semuel Pati SendaAffiliation unknown1
Renanto RenantoAffiliation unknown1
Mohammad EffendyAffiliation unknown1
Abdullah Nur AzizAffiliation unknown1
Yul Yunazwin NazaruddinAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, first harvested 9 Nov 2026, last seen 9 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of Instant Microbial Starter for Production of Fermented Cassava Flour: Effect of Vacuum Drying Temperature, Carrier Media, and Storage Temperature</dc:title>
	<dc:creator>Kresnowati, Made Tri Ari Penia</dc:creator>
	<dc:creator>Bindar, Yazid</dc:creator>
	<dc:creator>Rahmina, Fathya</dc:creator>
	<dc:subject xml:lang="en-US">Carrier</dc:subject>
	<dc:subject xml:lang="en-US">cassava</dc:subject>
	<dc:subject xml:lang="en-US">fercaf</dc:subject>
	<dc:subject xml:lang="en-US">fermentation</dc:subject>
	<dc:subject xml:lang="en-US">microorganism</dc:subject>
	<dc:subject xml:lang="en-US">starter</dc:subject>
	<dc:subject xml:lang="en-US">storage</dc:subject>
	<dc:subject xml:lang="en-US">vacuum drying</dc:subject>
	<dc:description xml:lang="en-US">Cassava is an important crop for tropical countries such as Nigeria, Brazil, Thailand, and Indonesia. The potential utilization of cassava in the food industry can be enhanced by processing cassava into fermented cassava flour (fercaf), which has been shown to have a neutral color and aroma as well as low cyanogenic content. The use of specific microbial starter in the cassava chip fermentation for fercaf production will direct the fermentation process, maintaining a high quality of the produced flour. Thereby, the availability of an easy-to-use microbial starter is important for the production of fermented cassava flour. The aim of this study was to evaluate vacuum drying methods in the preparation of microbial starter for fermented cassava flour production. In particular, the effects of carrier media, drying and storage temperature on cell viability in dry starter were tested. The results showed that different methods should be applied to different microbial species. Bacillus subtilis and Aspergillus Oryza should be prepared using fercaf as the carrier media at a drying temperature of 55 °C, whereas Lactobacillus plantarum starter should be prepared using skim milk as the carrier media at a drying temperatur of 40°C. Apart from B. subtilis, the starters should be stored in a refrigerator.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2018-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/9941</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2018.50.6.6</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 50 No. 6 (2018); 832-840</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2018.50.6</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/9941/3833</dc:relation>
</oai_dc:dc>