Melola Discovery

← Melola Discovery

Journal SINTA 1

The Design of Tachometer Contact and Non-Contact Using Microcontroller

Journal of Robotics and Control (JRC) · Vol. 1 No. 3 (2020) · pp. 65–69

DOI
10.18196/jrc.1315
ISSN
2715-5072, 2715-5056
Published
2020-02-26
Publisher
Universitas Muhammadiyah Yogyakarta
Language
eng

Abstract

Calibration is required for various kinds of tools from kitchen tools such as stirrers or mixers to medical tools such as temperature calibration, ECG, blood pressure, and other instrumentation tools to be according to the required standards. In medical devices, a digital tachometer has been used as a calibration support device to measure the speed of objects that rotate in RPM on the centrifuge. Some medical devices are calibrated in km/hour, for example, the ergo cycle and treadmill. Two different devices or a conversion from RPM to km/hour are required. The research aimed to design a measurement device that performed calibration of devices with different units, namely tachometer that can be used to measure speed in RPM and km/hr. Based on the research objective, a tool was made to measure the motor's rotational speed using the E18-D80NK sensor, microcontroller, and LCD without touching the object being measured.

Collaboration network of the authors

38 authors · 133 co-authorship links · 91 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Muhammadiyah University of Yogyakarta
  • Politeknik Perkapalan Negeri Surabaya
  • Ho Chi Minh City Open University
  • National Institute of Oceanography and Fisheries
  • Kabul University
  • Guru Gobind Singh Indraprastha University
  • Guilin University of Electronic Technology
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Joessianto Eko PoetroPoliteknik Perkapalan Negeri Surabaya9
Abdul LatifSultan Agung Islamic University5
Kunal KunalGuru Gobind Singh Indraprastha University5
Hendro Agus WidodoPoliteknik Perkapalan Negeri Surabaya5
Rachmad Andri AtmokoGuilin University of Electronic Technology5
Phong Thanh NguyenHo Chi Minh City Open University4
Robbi RahimUniversiti Malaysia Perlis3
Thanh Nguyen PhongHo Chi Minh City Open University3
Ahmad Wahyu ApriandiMuhammadiyah University of Yogyakarta3
Nur Hudha WijayaMuhammadiyah University of Yogyakarta3
Iswanto IswantoMuhammadiyah University of Yogyakarta2
Andi SupriyantoMuhammadiyah University of Yogyakarta2
Nur Mukhammad Zaidatur RochmanMuhammadiyah University of Yogyakarta2
Ibnu FaishalMuhammadiyah University of Yogyakarta2
Imam PambudiMuhammadiyah University of Yogyakarta2
Andi Gofer AlvianMuhammadiyah University of Yogyakarta2
Muhammad Khoirul HasinPoliteknik Perkapalan Negeri Surabaya1
Noorman RinantoPoliteknik Perkapalan Negeri Surabaya1
Dian Asa UtariPoliteknik Perkapalan Negeri Surabaya1
Aminatus Sa’diyahPoliteknik Perkapalan Negeri Surabaya1
Prisma MegantoroUniversitas Airlangga1
Andrei WidjanarkoUniversitas Gadjah Mada1
Alfana SanjayaMuhammadiyah University of Yogyakarta1
Nur HudhaMuhammadiyah University of Yogyakarta1
Zanella OktavihandaniMuhammadiyah University of Yogyakarta1
Fajar Ahmad FauziMuhammadiyah University of Yogyakarta1
Shela Asta JulianiMuhammadiyah University of Yogyakarta1
Gabriel De Brito SilvaAffiliation unknown1
Omar TananeUniversity of Hassan II Casablanca1
Muhtadin ArrosyidMuhammadiyah University of Yogyakarta1
Silva Andino MaselenoUniversiti Tenaga Nasional1
Bagas Aji SaputraPoliteknik Perkapalan Negeri Surabaya1
Edy Prasetyo HidayatPoliteknik Perkapalan Negeri Surabaya1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, first harvested 9 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Design of Tachometer Contact and Non-Contact Using Microcontroller</dc:title>
	<dc:creator>Padang Tunggal, Tatiya</dc:creator>
	<dc:creator>Anggi Kirana, Lailicia</dc:creator>
	<dc:creator>Zuhri Arfianto, Afif</dc:creator>
	<dc:creator>T.Helmy, Elsayed</dc:creator>
	<dc:creator>Waseel, Farhad</dc:creator>
	<dc:description xml:lang="en-US">Calibration is required for various kinds of tools from kitchen tools such as stirrers or mixers to medical tools such as temperature calibration, ECG, blood pressure, and other instrumentation tools to be according to the required standards. In medical devices, a digital tachometer has been used as a calibration support device to measure the speed of objects that rotate in RPM on the centrifuge. Some medical devices are calibrated in km/hour, for example, the ergo cycle and treadmill. Two different devices or a conversion from RPM to km/hour are required. The research aimed to design a measurement device that performed calibration of devices with different units, namely tachometer that can be used to measure speed in RPM and km/hr. Based on the research objective, a tool was made to measure the motor's rotational speed using the E18-D80NK sensor, microcontroller, and LCD without touching the object being measured.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2020-02-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/7548</dc:identifier>
	<dc:identifier>10.18196/jrc.1315</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 1 No. 3 (2020): May; 65-69</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:source>10.18196/jrc.v1i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/7548/4976</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Journal of Robotics and Control</dc:rights>
</oai_dc:dc>