Analysis of Performance of Permanent Magnet Generator Fluks Axial 1 Phasa with Variation Load

Saleh, Zulkiffli; Apriani, Yosi; Karim, Khoirul; Aldiansyah, Aldiansyah

doi:10.18196/jrc.2260

Journal SINTA 1

Analysis of Performance of Permanent Magnet Generator Fluks Axial 1 Phasa with Variation Load

Journal of Robotics and Control (JRC) · Vol. 2 No. 2 (2021) · pp. 98–102

DOI: 10.18196/jrc.2260
ISSN: 2715-5072, 2715-5056
Published: 2021-03-19
Publisher: Universitas Muhammadiyah Yogyakarta
Language: eng

Abstract

With the potential of low water head energy and relatively small water discharge then it takes a low round generator to be applied to the potential of existing energy. The development of Permanent Magnet Generator (PMG), being an alternative considering the pole construction of the rotor is relatively simple compared to conventional generators, so it is technically required a more number of rotor poles in the effort to lower the speed The nominal dial generator. The purpose of this research is to analyze the 1-phase axial generator performance with varied resistive loads and inductive loads. This research has 4 stages of research: 1). Study literature. 2). Carried out testing tools. 3). Measurement of data retrieval. 4). Data analysis. From this research obtained results from the tools and measurements of the data retrieval of the performance of axial generator 1 phase with inductive and resistive load Vaiasi. Load mounted 15 watts, voltage 35.10, current 0.80, RPM 2550 when load 75 Waat, Voltage 11.50, current 1.54, RPM 2220. From these results can be concluded axial generator 1 phase currents also get bigger but voltage and rpm decreases.

Keywords

Collaboration network of the authors

16 authors · 34 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

Affiliation unknown

Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles

Show as table

Co-author	Organisation	Joint articles
Ian Mochamad Sofian	Affiliation unknown	5
Wiwin A Oktaviani	Affiliation unknown	2
Riyan Kurnia Dillah	Affiliation unknown	2
Suppermen Suppermen	Affiliation unknown	2
Mustika Fitri	Affiliation unknown	1
Syam Hardwis	Affiliation unknown	1
Taufik Barlian	Affiliation unknown	1
Wiwin Armoldo Oktaviani	Affiliation unknown	1
Nugraha Syarif	Affiliation unknown	1
Anish Pandey	Affiliation unknown	1
Dhiya Uddin Rijalusalam	Affiliation unknown	1
Iswanto Suwarno	Affiliation unknown	1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, first harvested 9 Nov 2026, last seen 9 Nov 2026.

Original metadata (oai_dc)

<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analysis of Performance of Permanent Magnet Generator Fluks Axial 1 Phasa with Variation Load</dc:title>
	<dc:creator>Saleh, Zulkiffli</dc:creator>
	<dc:creator>Apriani, Yosi</dc:creator>
	<dc:creator>Karim, Khoirul</dc:creator>
	<dc:creator>Aldiansyah, Aldiansyah</dc:creator>
	<dc:subject xml:lang="en-US">PLTMH</dc:subject>
	<dc:subject xml:lang="en-US">PMG</dc:subject>
	<dc:subject xml:lang="en-US">Axial Generator</dc:subject>
	<dc:subject xml:lang="en-US">resistive load</dc:subject>
	<dc:subject xml:lang="en-US">inductive load.</dc:subject>
	<dc:description xml:lang="en-US">With the potential of low water head energy and relatively small water discharge then it takes a low round generator to be applied to the potential of existing energy. The development of Permanent Magnet Generator (PMG), being an alternative considering the pole construction of the rotor is relatively simple compared to conventional generators, so it is technically required a more number of rotor poles in the effort to lower the speed The nominal dial generator. The purpose of this research is to analyze the 1-phase axial generator performance with varied resistive loads and inductive loads. This research has 4 stages of research: 1). Study literature.  2). Carried out testing tools. 3). Measurement of data retrieval.  4). Data analysis. From this research obtained results from the tools and measurements of the data retrieval of the performance of axial generator 1 phase with inductive and resistive load Vaiasi. Load mounted 15 watts, voltage 35.10, current 0.80, RPM 2550 when load 75 Waat, Voltage 11.50, current 1.54, RPM 2220. From these results can be concluded axial generator 1 phase currents also get bigger but voltage and rpm decreases.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2021-03-19</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/8268</dc:identifier>
	<dc:identifier>10.18196/jrc.2260</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 2 No. 2 (2021): March; 98-102</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:source>10.18196/jrc.v2i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/8268/5619</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Journal of Robotics and Control (JRC)</dc:rights>
</oai_dc:dc>