Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Design of a Novel Observer-Based SMC for WECS System Using PMSG to Obtain Maximum Energy

Journal of Robotics and Control (JRC) · Vol. 6 No. 2 (2025) · pp. 871–979

DOI
10.18196/jrc.v6i2.25990
ISSN
2715-5072, 2715-5056
Published
2025-04-17
Publisher
Universitas Muhammadiyah Yogyakarta
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper studies and proposes a new sliding mode controller (SMC) for a wind energy conversion system (WECS) using a permanent magnet synchronous wind turbine generator (PMSG) to harvest maximum energy when the wind speed changes. In addition, the paper introduces a nonlinear disturbance observer (NDOB) to estimate the actual wind speed, to provide input to the proposed controller that the authors have studied. The control scheme proposed in this study not only considers the changes in the system parameters, but also considers the randomness of the wind speed changes. The effectiveness of the new SMC design and control scheme is demonstrated by simulation results on Matlab/Simulink software. These results are shown in the change of wind speed deformation, wind deformations that the turbine receives, turbulence assessment, the observer also estimated the non-snow parameters, the system also takes into account maximum power point tracking (MPPT), always consistent with the proposed control law. Moreover, the research results also show that the system works stably, the output is always close to the set value, the system works with high quality, thereby proving that the research results have been studied by the authors are suitable, bringing great benefits in the control process.

Keywords

Collaboration network of the authors

20 authors · 47 co-authorship links · 15 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Economics - Technology for Industries
  • Hanoi University of Science and Technology
  • Duy Tan University
  • Thai Nguyen University of Technology
  • Quy Nhon University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Hoang Dinh CoUniversity of Economics - Technology for Industries4
Pham Van MinhUniversity of Economics - Technology for Industries2
Hoa Van DoanUniversity of Economics - Technology for Industries1
Mai Van TaoUniversity of Economics - Technology for Industries1
Pham Ngoc SamUniversity of Economics - Technology for Industries1
Nguyen Duc DienUniversity of Economics - Technology for Industries1
Phuong Nam DaoHanoi University of Science and Technology1
Van Hai NguyenDuy Tan University1
Nguyễn Anh TuấnUniversity of Economics - Technology for Industries1
Nguyễn Văn ToảnUniversity of Economics - Technology for Industries1
Tùng Lâm NguyễnHanoi University of Science and Technology1
Roan Van HoaUniversity of Economics - Technology for Industries1
Tran Thi HuongUniversity of Economics - Technology for Industries1
Pham Thi Thu HaUniversity of Economics - Technology for Industries1
Bui Thi Hai LinhThai Nguyen University of Technology1
Vuong Dang QuocAffiliation unknown1
Bao Doan ThanhQuy Nhon University1
Hoang Bui HuuHanoi University of Science and Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, first harvested 9 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design of a Novel Observer-Based SMC for WECS System Using PMSG to Obtain Maximum Energy</dc:title>
	<dc:creator>Du, Dang Quoc</dc:creator>
	<dc:creator>Chuyen, Tran Duc</dc:creator>
	<dc:subject xml:lang="en-US">Wind Energy Conversion System (WECS)</dc:subject>
	<dc:subject xml:lang="en-US">Permanent Magnet Syschronous (PMSG)</dc:subject>
	<dc:subject xml:lang="en-US">Sliding Mode Control (SMC)</dc:subject>
	<dc:subject xml:lang="en-US">Nonlinear Disturbance Observer (NDOB)</dc:subject>
	<dc:subject xml:lang="en-US">Maximum Power Point Tracking (MPPT)</dc:subject>
	<dc:description xml:lang="en-US">This paper studies and proposes a new sliding mode controller (SMC) for a wind energy conversion system (WECS) using a permanent magnet synchronous wind turbine generator (PMSG) to harvest maximum energy when the wind speed changes. In addition, the paper introduces a nonlinear disturbance observer (NDOB) to estimate the actual wind speed, to provide input to the proposed controller that the authors have studied. The control scheme proposed in this study not only considers the changes in the system parameters, but also considers the randomness of the wind speed changes. The effectiveness of the new SMC design and control scheme is demonstrated by simulation results on Matlab/Simulink software. These results are shown in the change of wind speed deformation, wind deformations that the turbine receives, turbulence assessment, the observer also estimated the non-snow parameters, the system also takes into account maximum power point tracking (MPPT), always consistent with the proposed control law. Moreover, the research results also show that the system works stably, the output is always close to the set value, the system works with high quality, thereby proving that the research results have been studied by the authors are suitable, bringing great benefits in the control process.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2025-04-17</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/25990</dc:identifier>
	<dc:identifier>10.18196/jrc.v6i2.25990</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 6 No. 2 (2025); 871-979</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/25990/11464</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Dang Quoc Du, Tran Duc Chuyen</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>