Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Development of Green Resin Using Solid Waste Protein Soybean Curd “Tofu” Production

Journal of Tropical Life Science : International Journal of Theoretical, Experimental, and Applied Life Sciences · Vol. 1 No. 1 (2010)

DOI
10.11594/jtls.1.1.%x
ISSN
2527-4376, 2087-5517
Published
2010-11-16
Publisher
Journal of Tropical Life Science
Language
eng
License
creativecommons.org/licenses/by-nc/4.0

Abstract

One of the most concerns associated with many commercially available composites is that they used of non-degradable resins and fibers that primarily made using non-degradable, petroleum-based chemicals as feed stock. These conditions will create a serious problem in term of waste disposal after end of their life. Unlike petroleum, plant based protein and starches are yearly renewable. These resins are increasingly developed for various applications as replacements for non-degradable petroleum based resins. In addition, these resins may be easily composted after their life. In this study, Soybean Pulp Hemi-cellulose (SPH) was modified by cross-linking it with glutaraldehyde (GA). The modified SPH resins were characterized for its surface morphology, tensile and mass losses or biodegradability properties. The effect of GA on the surface morphology, tensile and biodegradability of the SPH resins were discussed. The SPH resins showed improved surface morphology and ductility. However, the increasing the GA content reduces the Young's modulus of the SPH resins. The SPH resins exhibited fracture stress point and Young's modulus maximum of and 3.02 MN/m2, respectively, and biodegradability of 40.42% after 30 days placed on the open air. These properties seem to be sufficient for developing green composites from the SPH resins reinforced with natural fiber for indoor structural applications. Keywords: Green Resin, Soybean Pulp Hemi-cellulose (SPH), Mechanical Properties, Biodegradation.

Collaboration network of the authors

10 authors · 27 co-authorship links · 9 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • State University of Malang
  • Mulawarman University
  • Universiti Teknologi MARA
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Saodah OmarUniversiti Teknologi MARA1
Aripriharta AriprihartaState University of Malang1
Mohamad Rodhi FaizState University of Malang1
Muhammad Adib AminState University of Malang1
Muhammad Cahyo BagaskoroState University of Malang1
Suhiro Wongso SusiloState University of Malang1
Teguh WirawanMulawarman University1
Subur P. PasaribuMulawarman University1
Aman Sentosa PanggabeanMulawarman University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://jtrolis.ub.ac.id/index.php/jtrolis/oai, first harvested 9 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Development  of  Green  Resin  Using  Solid  Waste  Protein  Soybean  Curd  “Tofu” Production</dc:title>
	<dc:creator xml:lang="en">Sujito, Sujito</dc:creator>
	<dc:description xml:lang="en">One of the most concerns associated with many commercially available composites is that they used of non-degradable resins and fibers that primarily made using non-degradable, petroleum-based chemicals as feed stock. These conditions will create a serious problem in term of waste disposal after end of their life. Unlike petroleum, plant based protein and starches are yearly renewable. These resins are increasingly developed for various applications as replacements for non-degradable petroleum based resins. In addition, these resins may be easily composted after their life. In this study, Soybean Pulp Hemi-cellulose (SPH) was modified by cross-linking it with glutaraldehyde (GA). The modified SPH resins were characterized for its surface morphology, tensile and mass losses or biodegradability properties. The effect of GA on the surface morphology, tensile and biodegradability of the SPH resins were discussed. The SPH resins showed improved surface morphology and ductility. However, the increasing the GA content reduces the Young's modulus of the SPH resins. The SPH resins exhibited fracture stress point and Young's modulus maximum of and 3.02 MN/m2, respectively, and biodegradability of 40.42% after 30 days placed on the open air. These properties seem to be sufficient for developing green composites from the SPH resins reinforced with natural fiber for indoor structural applications. Keywords: Green Resin, Soybean Pulp Hemi-cellulose (SPH), Mechanical Properties, Biodegradation.  </dc:description>
	<dc:publisher xml:lang="en">Journal of Tropical Life Science</dc:publisher>
	<dc:date>2010-11-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jtrolis.ub.ac.id/index.php/jtrolis/article/view/18</dc:identifier>
	<dc:identifier>10.11594/jtls.1.1.%x</dc:identifier>
	<dc:source xml:lang="en">Journal of Tropical Life Science; Vol. 1 No. 1 (2010); pp. 32-36</dc:source>
	<dc:source>2527-4376</dc:source>
	<dc:source>2087-5517</dc:source>
	<dc:source>10.11594/jtls.1.1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jtrolis.ub.ac.id/index.php/jtrolis/article/view/18/12</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2010 Journal of Tropical Life Science</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>