Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Performance Testing On Mixture Of Kisamir Pure Plant Oil (Ppo) And Kerosene As Wick Stove Fuel

Scientific Contributions Oil and Gas · Vol. 33 No. 3 (2022) · pp. 204–211

DOI
10.29017/SCOG.33.3.824
ISSN
2541-0520, 2089-3361
Published
2022-02-22
Publisher
Testing Center for Oil and Gas LEMIGAS
Language
eng
License
creativecommons.org/licenses/by/4.0

Abstract

Pure Plant Oil (PPO) which is made from “kisamir” seed has smaller kinetic viscosity value than jatropha and coconut oil. So it has potential to be used as alternative fuel/mixed kerosene. The test result of some main physical/chemical characteristics of fuel made from kerosine and pure plant oil (5% to 20% volume) are still in the limit of kerosene specification as decided by the government. However, the maximum power test result of the mixture of PPO and kerosene that has been tested on 16 wicks stove shows that the higher content of PPO in kerosene will decrease the maximum stove performance as well as stove’s efficiency value. But the blue color of fire gets clearer, because of less amount of sulfur by adding PPO in kerosene. The use of PPO up to 20% will reduce sulphur content up to 20%.

Keywords

Collaboration network of the authors

5 authors · 10 co-authorship links · 6 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • IPB University
  • Padjadjaran University
  • National Research and Innovation Agency
  • Bogor Agricultural Development Polytechnic
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Sam HerodianIPB University1
Anto Tri SugiartoNational Research and Innovation Agency1
Ahmad ThoriqPadjadjaran University1
ErniatiBogor Agricultural Development Polytechnic1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, first harvested 10 Nov 2026, last seen 10 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Performance Testing On Mixture Of Kisamir Pure Plant Oil (Ppo) And Kerosene As Wick Stove Fuel</dc:title>
	<dc:creator xml:lang="en">Yuliarita, Emi</dc:creator>
	<dc:subject xml:lang="en">PPO</dc:subject>
	<dc:subject xml:lang="en">Kerosine Alternatif fuel</dc:subject>
	<dc:subject xml:lang="en">Spesification</dc:subject>
	<dc:subject xml:lang="en">Maksimum Power</dc:subject>
	<dc:subject xml:lang="en">Efficiency stove</dc:subject>
	<dc:description xml:lang="en">Pure Plant Oil (PPO) which is made from “kisamir” seed has smaller kinetic viscosity value than jatropha and coconut oil. So it has potential to be used as alternative fuel/mixed kerosene. The test result of some main physical/chemical characteristics of fuel made from kerosine and pure plant oil (5% to 20% volume) are still in the limit of kerosene specification as decided by the government. However, the maximum power test result of the mixture of PPO and kerosene that has been tested on 16 wicks stove shows that the higher content of PPO in kerosene will decrease the maximum stove performance as well as stove’s efficiency value. But the blue color of fire gets clearer, because of less amount of sulfur by adding PPO in kerosene. The use of PPO up to 20% will reduce sulphur content up to 20%.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-02-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/824</dc:identifier>
	<dc:identifier>10.29017/SCOG.33.3.824</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 33 No. 3 (2010); 204-211</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 33 No 3 (2010); 204-211</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/824/610</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 1970 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>