Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

DATA PREPARATION FOR WATER INJECTION LABORATORY TEST

Scientific Contributions Oil and Gas · Vol. 27 No. 1 (2022) · pp. 16–21

DOI
10.29017/SCOG.27.1.1046
ISSN
2541-0520, 2089-3361
Published
2022-03-30
Publisher
Testing Center for Oil and Gas LEMIGAS
Language
eng
License
creativecommons.org/licenses/by/4.0

Abstract

Oil production limit that is usually followed by decrease of oil productivity in old fields is a major problem and can't be avoided. This case happened when cumulative oil production has approached primary recovery method. Decrease of the action of native reservoir energy is followed by drastically increase of production of water (saturation almost 100 %). In relation to this, a method is needed to obtain the additional oil recovery. Water injection method is one of the solutions to solve oil production problem that happened in old fields. It is expected that by using water injection method, productivity and oil recovery in old fields can be improved. Water that is used as the fluid injected into reservoir to improve oil recovery is sea water. How far oil recovery can be improved by using water injection method, is determined by a laboratory research. Before carrying out water injection laboratory test; one has to know what are the main points that play important role in determining the optimal oil recovery by water injection method. These are: firstly, basic parameters, secondly, laboratory test for water flooding, thirdly, the displacement of water injection process, then, standard operational procedure, next, water injection to obtain the additional oil recovey, lastly, the results are plotted a figure and or tabulated as the result of water injection laboratory test is obtained. In relation to the mentioned above, it will be better to write a scientific paper of water injection laboratory test. This paper is written based on our experience in enhanced oil recovery research (EOR), supported by textbook, such ás American Petroleum Institute, Petroleum Production Handbook and Standard Corrosion and water Technology For Petroleum Producers. Therefore, the main focus of this paper is "Data Preparation for Water Injection Laboratory Test". Hopefully, the contents of this paper give precious and useful informations, that is extremely valuable not only for LEMIGAS as Research and Development Centre for Oil and Gas technology, but also for the oil industry of the Departement of Petroleum Engineering of the universities in Indonesia

Keywords

Collaboration network of the authors

40 authors · 81 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aster RahayuAffiliation unknown2
Harapin HafidUniversitas Halu Oleo1
Firman NasiuUniversitas Halu Oleo1
Nita NitaAffiliation unknown1
Laode Arsad SaniAffiliation unknown1
Maharani MaharaniAffiliation unknown1
Yayah RukoyahAffiliation unknown1
Siti Hijrotul HopiahAffiliation unknown1
Lia NurkhalipahAffiliation unknown1
Syaw NurbillahAffiliation unknown1
Makrina TindangenAffiliation unknown1
Elsje Theodora MaasawetAffiliation unknown1
Rusdy A SirojAffiliation unknown1
Astrid S.W. SumahAffiliation unknown1
Asni JohariAffiliation unknown1
Revis AsraAffiliation unknown1
Kresna FebriyantoAffiliation unknown1
Mohammad JailaniAffiliation unknown1
Waharjani WaharjaniAffiliation unknown1
Fithriady IlyasAffiliation unknown1
Rina DesianaAffiliation unknown1
Joni Aldilla FajriAffiliation unknown1
Lee Wah LimAffiliation unknown1
Maryudi MaryudiAffiliation unknown1
Siti JamilatunAffiliation unknown1
Nafira Alfi Zaini AmrillahAffiliation unknown1
Veranica VeranicaAffiliation unknown1
Uril BahruddinAffiliation unknown1
Umar Abdul AzizAffiliation unknown1
Hamidatul LatifahAffiliation unknown1
Wardahtul JannahAffiliation unknown1
Husniyani HusniyaniAffiliation unknown1
Khairunnisa KhairunnisaAffiliation unknown1
Abd. WahidAffiliation unknown1
Cut Widya AudinaAffiliation unknown1
Ainun MardhiahAffiliation unknown1
Husnul FikryAffiliation unknown1
Sulaiman W.Affiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, first harvested 10 Nov 2026, last seen 10 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">DATA PREPARATION FOR WATER INJECTION LABORATORY TEST</dc:title>
	<dc:creator xml:lang="en">Makmur, Tjuwati</dc:creator>
	<dc:creator xml:lang="en">Nuraini, Nuraini</dc:creator>
	<dc:subject xml:lang="en">Water Injection</dc:subject>
	<dc:subject xml:lang="en">Laboratory</dc:subject>
	<dc:subject xml:lang="en">Primary Recovery</dc:subject>
	<dc:description xml:lang="en">Oil production limit that is usually followed by decrease of oil productivity in old fields is a major problem and can't be avoided. This case happened when cumulative oil production has approached primary recovery method. Decrease of the action of native reservoir energy is followed by drastically increase of production of water (saturation almost 100 %). In relation to this, a method is needed to obtain the additional oil recovery. Water injection method is one of the solutions to solve oil production problem that happened in old fields. It is expected that by using water injection method, productivity and oil recovery in old fields can be improved. Water that is used as the fluid injected into reservoir to improve oil recovery is sea water. How far oil recovery can be improved by using water injection method, is determined by a laboratory research. Before carrying out water injection laboratory test; one has to know what are the main points that play important role in determining the optimal oil recovery by water injection method. These are: firstly, basic parameters, secondly, laboratory test for water flooding, thirdly, the displacement of water injection process, then, standard operational procedure, next, water injection to obtain the additional oil recovey, lastly, the results are plotted a figure and or tabulated as the result of water injection laboratory test is obtained. In relation to the mentioned above, it will be better to write a scientific paper of water injection laboratory test. This paper is written based on our experience in enhanced oil recovery research (EOR), supported by textbook, such ás American Petroleum Institute, Petroleum Production Handbook and Standard Corrosion and water Technology For Petroleum Producers. Therefore, the main focus of this paper is "Data Preparation for Water Injection Laboratory Test". Hopefully, the contents of this paper give precious and useful informations, that is extremely valuable not only for LEMIGAS as Research and Development Centre for Oil and Gas technology, but also for the oil industry of the Departement of Petroleum Engineering of the universities in Indonesia</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1046</dc:identifier>
	<dc:identifier>10.29017/SCOG.27.1.1046</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 27 No. 1 (2004); 16-21</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 27 No 1 (2004); 16-21</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1046/835</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 1970 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>