Melola Discovery

← Melola Discovery

Journal SINTA 1

Design of 3 DOF hexapod leg movement using inverse kinematics: bridging gaps in multilegged robot kinematics literature

Sinergi · Vol. 29 No. 1 (2024) · pp. 1–8

DOI
10.22441/sinergi.2025.1.001
ISSN
2460-1217, 1410-2331
Published
2024-12-02
Publisher
Universitas Mercu Buana
Language
eng

Abstract

Designing the motion of a hexapod robot with 3 Degrees of Freedom (DOF) using the Inverse Kinematics method allows the robot to move by adjusting the angles of its leg joints according to the desired position and direction. This research involves the geometric and structural design of the hexapod robot and the development of an Inverse Kinematics algorithm to calculate the leg joint angles based on the target pose. The study uses the Inverse Kinematics method to design a hexapod robot for movement with 3 DOF. The testing results show an average Inverse Kinematics error of 1.56 mm on the X-axis, 0.88 mm on the Y-axis, and 0.78 mm on the Z-axis. During the forward and backward movement tests covering a distance of 100 cm, the average error was 2.58 cm and 12.38 cm, respectively. For the rotation tests, the average error was 3.6° for a 90° rotation to the right, 3° for a 90° rotation to the left, 13.2° for a 180° rotation to the right, and 3.8° for a 180° rotation to the left. The results indicate that the design of the 3DOF hexapod robot using the Inverse Kinematics method provides a sufficient level of accuracy in controlling movements along the X, Y, and Z axes. Despite some errors, the robot is capable of moving fairly accurately during forward, backward, and rotational movements.

Keywords

Collaboration network of the authors

19 authors · 55 co-authorship links · 27 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Mercu Buana University
  • Shanghai University
  • University of Technology Malaysia
  • Tun Hussein Onn University of Malaysia
  • Shenzhen Polytechnic University
  • Universitas Muhammadiyah Prof Dr Hamka
  • Yuan Ze University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Julpri AndikaMercu Buana University11
Andi AdriansyahMercu Buana University6
Muhammad Hafizd Ibnu HajarMercu Buana University6
Ahmad Athif Mohd FaudziUniversity of Technology Malaysia3
Yudhi GunardiMercu Buana University3
Abu Ubaidah ShamsudinTun Hussein Onn University of Malaysia2
Wenbin WangShenzhen Polytechnic University2
Md Musabbir HossainAffiliation unknown2
Long LiAffiliation unknown2
January Dwidasa WiniyogaMercu Buana University1
Prastika IndriyantiMercu Buana University1
Arafat FebriandirzaUniversitas Muhammadiyah Prof Dr Hamka1
Yudi HastomiMercu Buana University1
Fina SupeginaMercu Buana University1
Isack FaradyYuan Ze University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, first harvested 10 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design of 3 DOF hexapod leg movement using inverse kinematics: bridging gaps in multilegged robot kinematics literature</dc:title>
	<dc:creator>Suwoyo, Heru</dc:creator>
	<dc:creator>Taufikurohman, Nur Aziz</dc:creator>
	<dc:creator>Tian, Yingzhong</dc:creator>
	<dc:creator>Burhanudin, Achmad</dc:creator>
	<dc:subject xml:lang="en-US">3 DOF</dc:subject>
	<dc:subject xml:lang="en-US">Hexapod Robot</dc:subject>
	<dc:subject xml:lang="en-US">Inverse Kinematic</dc:subject>
	<dc:description xml:lang="en-US">Designing the motion of a hexapod robot with 3 Degrees of Freedom (DOF) using the Inverse Kinematics method allows the robot to move by adjusting the angles of its leg joints according to the desired position and direction. This research involves the geometric and structural design of the hexapod robot and the development of an Inverse Kinematics algorithm to calculate the leg joint angles based on the target pose. The study uses the Inverse Kinematics method to design a hexapod robot for movement with 3 DOF. The testing results show an average Inverse Kinematics error of 1.56 mm on the X-axis, 0.88 mm on the Y-axis, and 0.78 mm on the Z-axis. During the forward and backward movement tests covering a distance of 100 cm, the average error was 2.58 cm and 12.38 cm, respectively. For the rotation tests, the average error was 3.6° for a 90° rotation to the right, 3° for a 90° rotation to the left, 13.2° for a 180° rotation to the right, and 3.8° for a 180° rotation to the left. The results indicate that the design of the 3DOF hexapod robot using the Inverse Kinematics method provides a sufficient level of accuracy in controlling movements along the X, Y, and Z axes. Despite some errors, the robot is capable of moving fairly accurately during forward, backward, and rotational movements.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2024-12-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/msword</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/22157</dc:identifier>
	<dc:identifier>10.22441/sinergi.2025.1.001</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 29 No. 1 (2025); 1-8</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/22157/9176</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/22157/11683</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 SINERGI</dc:rights>
</oai_dc:dc>