Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Influence of lemon skin powder on the mechanical and thermal properties of polyvinyl alcohol (PVA)/cassava starch biocomposites prepared by solution casting method

Sinergi · Vol. 30 No. 2 (2026) · pp. 361–370

DOI
10.22441/sinergi.2026.2.004
ISSN
2460-1217, 1410-2331
Published
2026-06-03
Publisher
Universitas Mercu Buana
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

More environmentally friendly alternative materials are needed to replace synthetic plastics to prevent environmental pollution. One biocomposite, a mixture of polyvinyl alcohol (PVA) and cassava starch, is an appropriate solution; however, its mechanical properties are low. Lemon skin, which is often considered waste, contains promising cellulose and phenolic extract content, making it a potential superior and functional filler for biocomposites, particularly in active packaging applications. This study presents an investigation into the use of lemon skin powder (LSP) as a filler for PVA- and cassava starch-based biocomposites. The biocomposites were prepared using the solvent casting method by varying the concentration of lemon skin powder filler, namely 0%, 1%, 3%, and 5%, with the final product being a film. Analysis was carried out on the mechanical properties, morphology (Scanning Electron Microscopy (SEM)), and thermal properties of the film. The results show that the mechanical properties of the film increased when LSP was added, with the highest tensile strength of 13.82 MPa for biocomposite films containing 5% LSP compared to the tensile strength of pure PVA and PVA/cassava starch blends. In addition, the thermal properties of biocomposites also increased at this content, as evidenced by an increase in the initial decomposition temperature. Specifically, the initial decomposition temperature of pure PVA, which was 204°C, increased to 214°C in biocomposites with 5% LSP. This improvement in thermal properties and tensile strength can be attributed to the strong interfacial bonding between the filler and the matrix, which contributes to the overall compact structure of the biocomposite. Morphological observations confirm the increased interface interaction and uniformity of filler distribution in the composite. These results confirm that lemon skin fibers have positive potential as reinforcements for PVA and cassava starch-based biocomposites, particularly in food packaging applications.

Keywords

Collaboration network of the authors

40 authors · 85 co-authorship links · 11 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Jember
  • Universitas Jambi
  • Hasanuddin University
  • Universitas Muhammadiyah Semarang
  • Universitas Islam Negeri Ar-Raniry
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Adrian TawaiUniversitas Halu Oleo8
La Ode Muhammad ElwanUniversitas Halu Oleo3
La Ode AslimUniversitas Halu Oleo3
Dian Arisandy Eka Putra SembiringUniversitas Jambi3
Sartono SartonoUniversitas Halu Oleo2
Liwaul LiwaulUniversitas Halu Oleo2
Nur Fitriani Usdyana AtthamidAffiliation unknown2
Sri IndriatiAffiliation unknown2
Robi HendraUniversitas Jambi2
Nasrul IlminnafikUniversitas Jember2
Muh Nurkoyim KustantoUniversitas Jember2
Isnawaty IsnawatyAffiliation unknown1
Rahmat RamadhanUniversitas Halu Oleo1
la ode Maksar MuhurunaAffiliation unknown1
Ambo AkoHasanuddin University1
Ayi Nur FauziahUniversitas Halu Oleo1
Muhammad AmirUniversitas Halu Oleo1
Saidin SaidinUniversitas Halu Oleo1
Sahiruddin SahiruddinHasanuddin University1
Djoni Prawira RahardjaAffiliation unknown1
Abdul Latif TolengAffiliation unknown1
Rika HaryaniAffiliation unknown1
mawardi A. Asja ZulkarnaimAffiliation unknown1
Taufik TaufikUniversitas Halu Oleo1
Eka SuaibUniversitas Halu Oleo1
Amrullah AmrullahUniversitas Islam Negeri Ar-Raniry1
Alim BahriAffiliation unknown1
Ilham IlhamAffiliation unknown1
Ratu KhumaerahAffiliation unknown1
Muh AmirAffiliation unknown1
La Ode Muhammad ElwanAffiliation unknown1
Fitria FitriaAffiliation unknown1
Cindy Clara WidianiAffiliation unknown1
HardiwinotoUniversitas Muhammadiyah Semarang1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, first harvested 10 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Influence of lemon skin powder on the mechanical and thermal properties of polyvinyl alcohol (PVA)/cassava starch biocomposites prepared by solution casting method</dc:title>
	<dc:creator>Junus, Salahuddin</dc:creator>
	<dc:creator>Pradiza, Revvan Rifada</dc:creator>
	<dc:creator>Yusuf, Muhammad</dc:creator>
	<dc:creator>Darsin, Mahros</dc:creator>
	<dc:creator>Jatisukamto, Gaguk</dc:creator>
	<dc:creator>Asrofi, Mochamad</dc:creator>
	<dc:subject xml:lang="en-US">Biocomposites</dc:subject>
	<dc:subject xml:lang="en-US">Cassava Starch</dc:subject>
	<dc:subject xml:lang="en-US">Lemon Skin</dc:subject>
	<dc:subject xml:lang="en-US">Mechanical Properties</dc:subject>
	<dc:subject xml:lang="en-US">Polyvinyl Alcohol</dc:subject>
	<dc:subject xml:lang="en-US">Thermal Properties</dc:subject>
	<dc:description xml:lang="en-US">More environmentally friendly alternative materials are needed to replace synthetic plastics to prevent environmental pollution. One biocomposite, a mixture of polyvinyl alcohol (PVA) and cassava starch, is an appropriate solution; however, its mechanical properties are low. Lemon skin, which is often considered waste, contains promising cellulose and phenolic extract content, making it a potential superior and functional filler for biocomposites, particularly in active packaging applications. This study presents an investigation into the use of lemon skin powder (LSP) as a filler for PVA- and cassava starch-based biocomposites. The biocomposites were prepared using the solvent casting method by varying the concentration of lemon skin powder filler, namely 0%, 1%, 3%, and 5%, with the final product being a film.  Analysis was carried out on the mechanical properties, morphology (Scanning Electron Microscopy (SEM)), and thermal properties of the film. The results show that the mechanical properties of the film increased when LSP was added, with the highest tensile strength of 13.82 MPa for biocomposite films containing 5% LSP compared to the tensile strength of pure PVA and PVA/cassava starch blends. In addition, the thermal properties of biocomposites also increased at this content, as evidenced by an increase in the initial decomposition temperature. Specifically, the initial decomposition temperature of pure PVA, which was 204°C, increased to 214°C in biocomposites with 5% LSP. This improvement in thermal properties and tensile strength can be attributed to the strong interfacial bonding between the filler and the matrix, which contributes to the overall compact structure of the biocomposite. Morphological observations confirm the increased interface interaction and uniformity of filler distribution in the composite. These results confirm that lemon skin fibers have positive potential as reinforcements for PVA and cassava starch-based biocomposites, particularly in food packaging applications.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2026-06-03</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/33532</dc:identifier>
	<dc:identifier>10.22441/sinergi.2026.2.004</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 30 No. 2 (2026); 361-370</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/33532/12480</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 SINERGI</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>