Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Optimization of Waste Cooking Oil’s FFA as Biodiesel Feedstock

Teknomekanik · Vol. 4 No. 1 (2021) · pp. 14–21

DOI
10.24036/teknomekanik.v4i1.9072
ISSN
2621-8720, 2621-9980
Published
2021-05-24
Publisher
Universitas Negeri Padang
Language
eng
License
creativecommons.org/licenses/by/4.0

Abstract

Waste cooking oil has high Free Fatty Acid (FFA). It affected on decreasing a biodiesel production. FFA reduction is one of important processes in biodiesel production from waste cooking oil. Thus, this study aimed to examine the optimum condition in FFA reduction. The process is assisted by using ultrasonic irradiation on acid esterification. Variables of the process are acid concentration, molar ratio of methanol and oil, and irradiation time. Meanwhile temperature irradiation on 45oC is a control variable. Process optimization is conducted by Response Surface Methodology (RSM) with Central Composite Design (CCD). The optimum conditions of response were 7.22:1 (methanol to oil molar ratio), 0.92% wt H2SO4, 26.04 minutes (irradiation time), and 45oC (irradiation temperature). Ultrasonic system reduced FFA significantly compared to conventional method.

Keywords

Collaboration network of the authors

40 authors · 164 co-authorship links · 95 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknologi MARA
  • Universitas Negeri Padang
  • State University of Semarang
  • Institut Teknologi Sepuluh Nopember
  • Andalas University
  • University of Technology Malaysia
  • Hiroshima University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Ratna Dewi KusumaningtyasState University of Semarang3
Fazlena HamzahUniversiti Teknologi MARA3
Rozana Azrina SazaliUniversiti Teknologi MARA3
Dori YuvendaUniversitas Negeri Padang2
Remon LapisaUniversitas Negeri Padang2
Krismadinata KrismadinataUniversitas Negeri Padang2
Dhoni HartantoState University of Semarang2
Haniif PrasetiawanState University of Semarang2
Miradatul Najwa Muhd RodhiUniversiti Teknologi MARA2
Gusni SushantiHiroshima University2
Mulianti MuliantiUniversitas Negeri Padang2
Dinda Adelia FauziAffiliation unknown1
Catur Rini WidyastutiState University of Semarang1
Muji SetiyoUniversitas Muhammadiyah Magelang1
Bambang SudarmantaInstitut Teknologi Sepuluh Nopember1
Randi Purnama PutraUniversitas Negeri Padang1
Jamaludin JamaludinInstitut Teknologi Sepuluh Nopember1
Oki MurazaPertamina (Indonesia)1
Rahadian ZainulUniversitas Negeri Padang1
Asnil AsnilAndalas University1
Andri Cahyo KumoroDiponegoro University1
Muhammad Zarin Amin ZainalUniversiti Teknologi MARA1
Nur Fatin Syafiqah Mohamad NorUniversiti Teknologi MARA1
Sarina SulaimanInternational Islamic University Malaysia1
Kenneth Stuart SorbieAffiliation unknown1
Lorraine Scott BoakHeriot-Watt University1
Nurshazwani Shuhada Al BadriUniversiti Teknologi MARA1
Farah Hanim Ab HamidUniversiti Teknologi MARA1
Mohd Zaki Zainal AbidinUniversiti Teknologi MARA1
Nurazreen Shazwin KamarudinUniversiti Teknologi MARA1
Nailah Fasihah SidekUniversiti Teknologi MARA1
Faisal AbnisaKing Abdulaziz University1
Noorhaliza AzizUniversiti Teknologi MARA1
Azianna GusniahUniversiti Teknologi MARA1
Is Prima NandaAndalas University1
Hamidreza GhandvarUniversity of Technology Malaysia1
Mohd Hasbullah IdrisUniversity of Technology Malaysia1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, first harvested 10 Nov 2026, last seen 16 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimization of Waste Cooking Oil’s FFA as Biodiesel Feedstock</dc:title>
	<dc:creator xml:lang="en">Primandari, Sri Rizki Putri</dc:creator>
	<dc:creator xml:lang="en">Arafat, Andril</dc:creator>
	<dc:creator xml:lang="en">Veny, Harumi</dc:creator>
	<dc:subject xml:lang="en">Waste cooking oil;</dc:subject>
	<dc:subject xml:lang="en">High Free Fatty Acid;</dc:subject>
	<dc:subject xml:lang="en">Ultrasonic irradiation;</dc:subject>
	<dc:subject xml:lang="en">Acid esterification;</dc:subject>
	<dc:subject xml:lang="en">Response Surface Methodology</dc:subject>
	<dc:description xml:lang="en">Waste cooking oil has high Free Fatty Acid (FFA). It affected on decreasing a biodiesel production. FFA reduction is one of important processes in biodiesel production from waste cooking oil. Thus, this study aimed to examine the optimum condition in FFA reduction. The process is assisted by using ultrasonic irradiation on acid esterification. Variables of the process are acid concentration, molar ratio of methanol and oil, and irradiation time. Meanwhile temperature irradiation on 45oC is a control variable. Process optimization is conducted by Response Surface Methodology (RSM) with Central Composite Design (CCD). The optimum conditions of response were 7.22:1 (methanol to oil molar ratio), 0.92% wt H2SO4, 26.04 minutes (irradiation time), and 45oC (irradiation temperature). Ultrasonic system reduced FFA significantly compared to conventional method.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2021-05-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/90</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v4i1.9072</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 4 No. 1 (2021): Regular Issue; 14-21</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/90/39</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Sri Rizki Putri Primandari, Andril Arafat, Harumi Veny</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>