Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Design and optimization of a linear fiber-reinforced soft actuator for improved linear motion performance

Bulletin of Electrical Engineering and Informatics · Vol. 14 No. 1 (2024) · pp. 173–183

DOI
10.11591/eei.v14i1.8557
ISSN
2089-3191, 2302-9285
Published
2024-11-22
Publisher
Institute of Advanced Engineering and Science (IAES)
Language
en
License
creativecommons.org/licenses/by-sa/4.0/

Abstract

The demand for safe and flexible actuators has increased as traditional actuators pose safety risks due to their rigid materials, especially in applications requiring human-machine interaction. This study focuses on designing and optimizing a linear fiber-reinforced soft actuator to enhance linear motion performance while maintaining safety and flexibility. Finite element method (FEM) analysis was used to evaluate the effects of varying key design parameters, including core radius, actuator length, and core wall thickness. The analysis revealed that increasing the core radius leads to greater linear extension, while increasing the actuator’s length and wall thickness reduces extension. Among the tested designs, the R10 design exhibited the highest linear extension, with a 44.41% increase in length compared to the original design. However, the R10 design also showed undesirable bulging at the free end under pressure, which necessitated further optimization. By increasing the thickness of the sheath wall, the bulging was reduced, and the optimized design achieved a 34.53% increase in extension. This study highlights the significance of parameter optimization in fiber-reinforced soft actuators to achieve superior linear motion performance. Future work will explore further improvements in structural stability, sensor integration for precise control, and advanced fabrication techniques for better customization and durability.

Keywords

Collaboration network of the authors

29 authors · 73 co-authorship links · 32 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • National University of Malaysia
  • University of Technology Malaysia
  • Universiti Malaysia Terengganu
  • Universitas Muhammadiyah Malang
  • Middle Technical University
  • Al-Furat Al-Awsat Technical University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Shahrizan JamaludinUniversiti Malaysia Terengganu3
Siau Ping TeeUniversiti Teknikal Malaysia Melaka3
Redwan A.K. NoamanNational University of Malaysia2
Mohd Alauddin Mohd AliNational University of Malaysia2
Faisal SaeedUniversity of Technology Malaysia2
Irma Wani JamaludinUniversiti Teknikal Malaysia Melaka2
Shin Horng ChongUniversiti Teknikal Malaysia Melaka2
Wan Mimi Diyana Wan ZakiNational University of Malaysia2
N. MohamoodUniversiti Teknikal Malaysia Melaka1
M. F. NormanNational University of Malaysia1
D. SanmuthamNational University of Malaysia1
Mardhiyah Md JanNational University of Malaysia1
Yeo Chin KiatAffiliation unknown1
Zulfatman HasUniversitas Muhammadiyah Malang1
Yahaya Md SamUniversity of Technology Malaysia1
Chong Chee SoonUniversiti Teknikal Malaysia Melaka1
Rozaimi GhazaliUniversiti Teknikal Malaysia Melaka1
Muhamad Fadli GhaniUniversiti Teknikal Malaysia Melaka1
Mahamod B. IsmailNational University of Malaysia1
Alaa Rishek HoshiNational University of Malaysia1
Abd Al-Razak T. RahemMiddle Technical University1
Salim Muhsin WadiAl-Furat Al-Awsat Technical University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Design and optimization of a linear fiber-reinforced soft actuator for improved linear motion performance</dc:title><dc:creator>Mariam Md Ghazaly</dc:creator><dc:creator>Min Yee Wong</dc:creator><dc:creator>Zulkeflee Abdullah</dc:creator><dc:creator>Norhaslinda Hasim</dc:creator><dc:creator>Nur Maisarah Mohd Sobran</dc:creator><dc:creator>Hazriq Izzuan Jaafar</dc:creator><dc:creator>Nasharuddin Zainal</dc:creator><dc:subject>soft actuators</dc:subject><dc:subject>fiber-reinforced actuators</dc:subject><dc:subject>actuator design optimization</dc:subject><dc:subject>core radius</dc:subject><dc:subject>linear extensions</dc:subject><dc:subject>flexible actuators</dc:subject><dc:description xml:lang="en">The demand for safe and flexible actuators has increased as traditional actuators pose safety risks due to their rigid materials, especially in applications requiring human-machine interaction. This study focuses on designing and optimizing a linear fiber-reinforced soft actuator to enhance linear motion performance while maintaining safety and flexibility. Finite element method (FEM) analysis was used to evaluate the effects of varying key design parameters, including core radius, actuator length, and core wall thickness. The analysis revealed that increasing the core radius leads to greater linear extension, while increasing the actuator’s length and wall thickness reduces extension. Among the tested designs, the R10 design exhibited the highest linear extension, with a 44.41% increase in length compared to the original design. However, the R10 design also showed undesirable bulging at the free end under pressure, which necessitated further optimization. By increasing the thickness of the sheath wall, the bulging was reduced, and the optimized design achieved a 34.53% increase in extension. This study highlights the significance of parameter optimization in fiber-reinforced soft actuators to achieve superior linear motion performance. Future work will explore further improvements in structural stability, sensor integration for precise control, and advanced fabrication techniques for better customization and durability.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2024-11-22</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v14i1.8557</dc:identifier><dc:identifier>10.11591/eei.v14i1.8557</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 14 No 1 (2024); 173-183</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/8557/4026</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>