Melola Discovery

← Melola Discovery

Journal SINTA 3

Analysis of Number of Layers and Volume Fraction of Fiber Against Shock Load and Composite Compressive Strength Wind Turbine Propeller

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 21 No. 3 (2021) · pp. 165–171

DOI
10.31940/logic.v21i3.165-171
ISSN
2580-5649, 1412-114X
Published
2021-11-30
Publisher
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Language
eng

Abstract

The manufacture of wind turbine blades has a very high risk of failure, especially in the manufacturing section or in this case the material structure. If the structure of the propeller material is not able to withstand the very high pressure and air flow, it will result in the failure of the material structure when it is in use. For this reason, the purpose of this study was to determine the composition of composite materials that have high strength and toughness properties and are suitable for wind turbine propellers. The method used in this research is experimental. The independent variables include the number of layers and the volume fraction of straw fiber. The dependent variables are shock load and compressive strength. Each compression test specimen is made with a gauge length of 100mm, a width of 25mm, and a thickness of 2.5mm. While the impact test specimens are made equal to l25mm long, l2mm wide, l2mm high, and 2mm notch. The results showed that the bending strength of the straw fiber composite with 6 layers had an increasing trend as the number of layers increased. The highest bending strength with the number of piles of 6 layers and the lowest strength with the number of piles of 2 layers. In addition, the volume fraction is very influential on the bending stress of the straw composite matrix. It can be seen that the matrix with a volume fraction of 50% has the greatest bending stress in each number of layers, both 2, 4 and 6. For the impact test, it is found that the optimal number of layers occurs in the number of 2 layers with a volume fraction of 33%. The shock load tends to decrease. Meanwhile, based on the volume fraction, the larger the volume fraction, the smaller the shock load that can be received by the straw fiber composite material.

Keywords

Collaboration network of the authors

26 authors · 55 co-authorship links · 13 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Politeknik Negeri Malang
  • State University of Semarang
  • Jakarta State Polytechnic
  • Indonesia University of Education
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Husein Bima HertantoState University of Semarang1
Cahya RadhiyastamaState University of Semarang1
Lindu Aji PamungkasState University of Semarang1
Bintar IbrizaState University of Semarang1
Muhammad Arif Nur HudaPoliteknik Negeri Malang1
Pribadi Mumpuni AdhiJakarta State Polytechnic1
Agus SetiawanIndonesia University of Education1
SuryantoAffiliation unknown1
Eko YudiyantoPoliteknik Negeri Malang1
Khambali KhambaliPoliteknik Negeri Malang1
Falih AlauddinPoliteknik Negeri Malang1
Hangga WicaksonoPoliteknik Negeri Malang1
Bima Cahya Maula DanaPoliteknik Negeri Malang1
SyamsulAffiliation unknown1
Septyana RiskitasariPoliteknik Negeri Malang1
Talifatim MachfurohPoliteknik Negeri Malang1
Etik PuspitasariPoliteknik Negeri Malang1
R.N. Akhsanu TakwimPoliteknik Negeri Malang1
Zahratul JannahPoliteknik Negeri Malang1
Asrori AsroriState University of Semarang1
Mira Esculenta MartawatiPoliteknik Negeri Malang1
W LulutPoliteknik Negeri Malang1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analysis of Number of Layers and Volume Fraction of Fiber Against Shock Load and Composite Compressive Strength Wind Turbine Propeller</dc:title>
	<dc:creator>Kris Witono</dc:creator>
	<dc:creator>Pondi Udianto</dc:creator>
	<dc:creator>Heru Prasetyo</dc:creator>
	<dc:creator>Sugeng Hadi Susilo</dc:creator>
	<dc:subject xml:lang="en-US">composite</dc:subject>
	<dc:subject xml:lang="en-US">number of layers</dc:subject>
	<dc:subject xml:lang="en-US">volume fraction</dc:subject>
	<dc:subject xml:lang="en-US">shock load</dc:subject>
	<dc:subject xml:lang="en-US">compressive strength</dc:subject>
	<dc:description xml:lang="en-US">The manufacture of wind turbine blades has a very high risk of failure, especially in the manufacturing section or in this case the material structure. If the structure of the propeller material is not able to withstand the very high pressure and air flow, it will result in the failure of the material structure when it is in use. For this reason, the purpose of this study was to determine the composition of composite materials that have high strength and toughness properties and are suitable for wind turbine propellers.&amp;nbsp;The method used in this research is experimental. The independent variables include the number of layers and the volume fraction of straw fiber. The dependent variables are shock load and compressive strength. Each compression test specimen is made with a gauge length of 100mm, a width of 25mm, and a thickness of 2.5mm. While the impact test specimens are made equal to l25mm long, l2mm wide, l2mm high, and 2mm notch.&amp;nbsp;The results showed that the bending strength of the straw fiber composite with 6 layers had an increasing trend as the number of layers increased. The highest bending strength with the number of piles of 6 layers and the lowest strength with the number of piles of 2 layers. In addition, the volume fraction is very influential on the bending stress of the straw composite matrix. It can be seen that the matrix with a volume fraction of 50% has the greatest bending stress in each number of layers, both 2, 4 and 6. For the impact test, it is found that the optimal number of layers occurs in the number of 2 layers with a volume fraction of 33%. The shock load tends to decrease. Meanwhile, based on the volume fraction, the larger the volume fraction, the smaller the shock load that can be received by the straw fiber composite material.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2021-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/93</dc:identifier>
	<dc:identifier>10.31940/logic.v21i3.165-171</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 21 No. 3 (2021): November; 165-171</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v21i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/93/41</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>