Melola Discovery

← Melola Discovery

Journal SINTA 3

THE EFFECT OF PYROLYSIS TEMPERATURE ON THE HEAT VALUE OF PYRO-OIL USING PLASTIC WASTE

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 22 No. 2 (2022) · pp. 154–158

DOI
10.31940/logic.v22i2.162-166
ISSN
2580-5649, 1412-114X
Published
2022-07-30
Publisher
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Language
eng

Abstract

This work primarily investigated the pyrolysis of smalls scale fixed bed reactor using plastic wastes type LDPE during slow pyrolysis (non-isothermal) in a batch reactor to assess the effect of different temperatures on the product yield and heating value. The calorie bomb of Parr Instrument was performed to investigated heating value of pyro-oil product at different temperatures 250, 275, 300oC. The pyro-oil obtained at higher product yield of 300 oC while the increased temperature will affect to increase the product yield of pyro-oil. The highest heating value of pyro-oil produced at a reactor temperature of 300oC is 9,769.78 cal/gr. From the results of pyro-oil using plastic waste type LDPE, the characteristics of the heating value are equivalent to diesel fuel.

Keywords

Collaboration network of the authors

18 authors · 46 co-authorship links · 1 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Politeknik Negeri Bali
  • Udayana University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
I Wayan Suma WibawaPoliteknik Negeri Bali3
Made Ardikosa Satrya WibawaPoliteknik Negeri Bali3
I Made Anom AdiaksaPoliteknik Negeri Bali2
I Ketut AdiPoliteknik Negeri Bali1
I Komang KantunPoliteknik Negeri Bali1
Anak Agung Gede Pradnyana DiputraAffiliation unknown1
I Made RajendraPoliteknik Negeri Bali1
I Ketut Gde Juli SuarbawaPoliteknik Negeri Bali1
INS WinayaAffiliation unknown1
I Made Anom AdiaksaPoliteknik Negeri Bali1
Agung PradnyanaPoliteknik Negeri Bali1
I Wayan Agus Rantia DanaPoliteknik Negeri Bali1
Anak Agung Gede Pradnyana DiputraPoliteknik Negeri Bali1
I Nyoman Suprapta WinayaUdayana University1
I Made SuciptaAffiliation unknown1
I Gede SantosaPoliteknik Negeri Bali1
Ketut AdiPoliteknik Negeri Bali1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">THE EFFECT OF PYROLYSIS TEMPERATURE ON THE HEAT VALUE OF PYRO-OIL USING PLASTIC WASTE</dc:title>
	<dc:creator>Putrawan, I Made Agus</dc:creator>
	<dc:subject xml:lang="en-US">fixed bed reactor</dc:subject>
	<dc:subject xml:lang="en-US">slow pyrolysis</dc:subject>
	<dc:subject xml:lang="en-US">plastic waste LDPE</dc:subject>
	<dc:subject xml:lang="en-US">heating value</dc:subject>
	<dc:description xml:lang="en-US">This work primarily investigated the pyrolysis of smalls scale fixed bed reactor using plastic wastes type LDPE during slow pyrolysis (non-isothermal) in a batch reactor to assess the effect of different temperatures on the product yield and heating value. The calorie bomb of Parr Instrument was performed to investigated heating value of pyro-oil product at different temperatures 250, 275, 300oC. The pyro-oil obtained at higher product yield of 300 oC while the increased temperature will affect to increase the product yield of pyro-oil. The highest heating value of pyro-oil produced at a reactor temperature of 300oC is 9,769.78 cal/gr. From the results of pyro-oil using plastic waste type LDPE, the characteristics of the heating value are equivalent to diesel fuel.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2022-07-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/560</dc:identifier>
	<dc:identifier>10.31940/logic.v22i2.162-166</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 22 No. 2 (2022): July; 154-158</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v22i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/560/326</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>