Melola Discovery

← Melola Discovery

Journal SINTA 3

The Effect of Composition and Type of Metal Filler on Heat Resistance of Silica Rubber Matric Composites

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 23 No. 3 (2023) · pp. 169–174

DOI
10.31940/logic.v23i3.169-174
ISSN
2580-5649, 1412-114X
Published
2023-11-30
Publisher
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Language
eng

Abstract

Thermal Tensioning is one of the methods use to minimise the occurrence of residual stress and unwanted distorsion during welding. One of the thermal tensioning methods is Static Thermal Tensioning (STT), which involves countering thermal stress during welding. The STT method requires an active cooling behind the welding line. Several properties are required for the coolant material, such as thermal conductivity, heat resistance, and good flexibility. To achieve the desired properties, a mixture of different materials was used, commonly called a composite. The purpose of this study is to know the effect of filler metal composition and type on the heat resistance of silica rubber matric composites. This study used 2 independent variables: the filler composition in composites with variations of K1 (60%) and K2 (70%), and the type of filler metal, aluminium and copper powder with variation J1 (100%-0%), J2 (75%-25%), J3 (50%-50%), J4 (25%-75%), and J5 (0-100%). The testing process used Thermogravimetry Analysis (TGA) method with replication 2 times. The results of this study showed the specimens with K1;J1 composition,containing 60% pure aluminium filler metal, showed the best heat resistance with a final weight of 88,25%. While specimens with K2;J5 composition, containing 70% pure copper filler metal, showed the worst heat resistance with a final weight of 74,25%.

Keywords

Collaboration network of the authors

28 authors · 74 co-authorship links · 7 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Politeknik Negeri Malang
  • Universitas Gadjah Mada
  • State University of Semarang
  • Lambung Mangkurat University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
SubagiyoAffiliation unknown2
Syamsul HadiPoliteknik Negeri Malang2
MaryonoAffiliation unknown1
WinarsihState University of Semarang1
Syahrul FauziUniversitas Gadjah Mada1
Syamsul HadiPoliteknik Negeri Malang1
SarjiyanaAffiliation unknown1
Sudarmadji .Affiliation unknown1
Nila AliaPoliteknik Negeri Malang1
Bambang IrawanLambung Mangkurat University1
Hangga WicaksonoPoliteknik Negeri Malang1
Andhika Erlangga Setiawan PutraPoliteknik Negeri Malang1
Sza Sya Monica ValeriaPoliteknik Negeri Malang1
Samsul HadiPoliteknik Negeri Malang1
Muhamad Zidan WibowoPoliteknik Negeri Malang1
Muhammad Naufal Abiyyi HutagalungPoliteknik Negeri Malang1
Firman DwiyantoPoliteknik Negeri Malang1
Dadang KurniawanPoliteknik Negeri Malang1
Sugeng Hadi SusiloPoliteknik Negeri Malang1
Zahratul JannahPoliteknik Negeri Malang1
Imam MashudiPoliteknik Negeri Malang1
Agus HardjitoPoliteknik Negeri Malang1
Listiono ListionoPoliteknik Negeri Malang1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Composition and Type of Metal Filler on Heat Resistance of Silica Rubber Matric Composites</dc:title>
	<dc:creator>Takwim, R.N. Akhsanu </dc:creator>
	<dc:creator>Murdani, Anggit</dc:creator>
	<dc:creator>Purwoko</dc:creator>
	<dc:creator>Pranoto, Bayu </dc:creator>
	<dc:creator>Putra, Naufal Reza</dc:creator>
	<dc:subject xml:lang="en-US">alumunium</dc:subject>
	<dc:subject xml:lang="en-US">composite</dc:subject>
	<dc:subject xml:lang="en-US">copper</dc:subject>
	<dc:subject xml:lang="en-US">heat resistance</dc:subject>
	<dc:subject xml:lang="en-US">silica rubber</dc:subject>
	<dc:description xml:lang="en-US">Thermal Tensioning is one of the methods use to minimise the occurrence of residual stress and unwanted distorsion during welding. One of the thermal tensioning methods is Static Thermal Tensioning (STT), which involves countering thermal stress during welding. The STT method requires an active cooling behind the welding line. Several properties are required for the coolant material, such as thermal conductivity, heat resistance, and good flexibility. To achieve the desired properties, a mixture of different materials was used, commonly called a composite. The purpose of this study is to know the effect of filler metal composition and type on the heat resistance of silica rubber matric composites. This study used 2 independent variables: the filler composition in composites with variations of K1 (60%) and K2 (70%), and the type of filler metal, aluminium and copper powder with variation J1 (100%-0%), J2 (75%-25%), J3 (50%-50%), J4 (25%-75%), and J5 (0-100%). The testing process used Thermogravimetry Analysis (TGA) method with replication 2 times. The results of this study showed the specimens with K1;J1 composition,containing 60% pure aluminium filler metal, showed the best heat resistance with a final weight of 88,25%. While specimens with K2;J5 composition, containing 70% pure copper filler metal, showed the worst heat resistance with a final weight of 74,25%.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2023-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1318</dc:identifier>
	<dc:identifier>10.31940/logic.v23i3.169-174</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 23 No. 3 (2023): November; 169-174</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v23i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/1318/683</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>