Melola Discovery

← Melola Discovery

Journal SINTA 3

Influence of MIG Welding Process Parameters on the Strength of Bimetal Joints: Study of Gas Flow Rate and Macrofractures

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 24 No. 3 (2024) · pp. 141–149

DOI
10.31940/logic.v24i3.141-149
ISSN
2580-5649, 1412-114X
Published
2024-11-30
Publisher
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Language
eng

Abstract

Bimetal joints are often used in various industries, such as automotive, power generation, electronics, and manufacturing. This is because bimetal joints allow the joining of two types of metal with different properties. Welding two different types of metal can pose its own challenges, such as the difficulty of controlling welding parameters so that the results are optimal for both types of metal, as well as differences in the thermal and mechanical properties of the two metals. This has led to extensive research on bimetal plate connections. Based on this background, this research aims to determine the effect of variations in flow rate and current strength on the tensile strength of robotic welding bimetal welded joints, as well as determine the results of macro photos of fractures resulting from tensile tests for each variation. The research was carried out experimentally where each variation was repeated with data 3 times. Based on the results and discussion, it is known that the optimal gas flow rate in general is 20 l/min, where the tensile strength reaches 353.1442 MPa–455.5458 MPa. At this flow rate, the dominant fracture occurs in the base metal and is ductile, which indicates good plastic deformation. On the other hand, gas flow that is too low or too high causes joint defects and reduces the tensile strength. Meanwhile, other welding parameters, namely variations in welding current, affect tensile strength. At a gas flow of 10 l/min, increasing the current to 180 A produces the highest tensile strength of 449.4357 MPa with ductile fracture characteristics. However, at a current of 120 A there is a significant decrease due to overheating, especially at higher gas flows such as 20 l/min and 30 l/min, which results in brittle fracture in the heat-affected zone (HAZ). The results of this research contribute to the understanding of the influence of welding parameters on the tensile strength and fracture characteristics of bimetallic joints. This research can be a reference for the development of more efficient and reliable welding processes in various industries, such as automotive, power generation and manufacturing, which require bimetallic joints with optimal quality.

Keywords

Collaboration network of the authors

28 authors · 81 co-authorship links · 6 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Politeknik Negeri Malang
  • Politeknik Negeri Madiun
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Zakiyah AmaliaPoliteknik Negeri Malang2
Siti Duratun Nasiqiati RosadyPoliteknik Negeri Malang2
Indrazno SiradjuddinPoliteknik Negeri Malang1
Ferdian RonilayaPoliteknik Negeri Malang1
Ida Lailatul FitriaPoliteknik Negeri Malang1
Gillang Al AzharPoliteknik Negeri Malang1
Rendi Pambudi WicaksonoPoliteknik Negeri Madiun1
Heru PrasetyoPoliteknik Negeri Malang1
Pondi UdiantoPoliteknik Negeri Malang1
Sugeng Hadi SusiloPoliteknik Negeri Malang1
Hangga WicaksonoPoliteknik Negeri Malang1
Bima Cahya Maula DanaPoliteknik Negeri Malang1
SyamsulAffiliation unknown1
Fica Aida Nadhifatul AiniPoliteknik Negeri Malang1
Fitrah Bisma Taimullah Al JahfalPoliteknik Negeri Malang1
Ardhi Prawira RohimPoliteknik Negeri Malang1
Nurlia Pramita SariPoliteknik Negeri Malang1
Agus HardjitoPoliteknik Negeri Malang1
SubagiyoPoliteknik Negeri Malang1
Syamsul HadiPoliteknik Negeri Malang1
Ahmad Hanif FirdausPoliteknik Negeri Malang1
Andri SetiawanPoliteknik Negeri Malang1
Alfarizi Al AzisPoliteknik Negeri Malang1
Vinan ViyusPoliteknik Negeri Malang1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Influence of MIG Welding Process Parameters on the Strength of Bimetal Joints: Study of Gas Flow Rate and Macrofractures</dc:title>
	<dc:creator>Talifatim Machfuroh</dc:creator>
	<dc:creator>Witono, Kris</dc:creator>
	<dc:creator>Riskitasari, Septyana</dc:creator>
	<dc:creator>Puspitasari, Etik</dc:creator>
	<dc:subject xml:lang="en-US">Bimetal</dc:subject>
	<dc:subject xml:lang="en-US">MIG</dc:subject>
	<dc:subject xml:lang="en-US">Joint</dc:subject>
	<dc:subject xml:lang="en-US">Welding</dc:subject>
	<dc:description xml:lang="en-US">Bimetal joints are often used in various industries, such as automotive, power generation, electronics, and manufacturing. This is because bimetal joints allow the joining of two types of metal with different properties. Welding two different types of metal can pose its own challenges, such as the difficulty of controlling welding parameters so that the results are optimal for both types of metal, as well as differences in the thermal and mechanical properties of the two metals. This has led to extensive research on bimetal plate connections. Based on this background, this research aims to determine the effect of variations in flow rate and current strength on the tensile strength of robotic welding bimetal welded joints, as well as determine the results of macro photos of fractures resulting from tensile tests for each variation. The research was carried out experimentally where each variation was repeated with data 3 times. Based on the results and discussion, it is known that the optimal gas flow rate in general is 20 l/min, where the tensile strength reaches 353.1442 MPa–455.5458 MPa. At this flow rate, the dominant fracture occurs in the base metal and is ductile, which indicates good plastic deformation. On the other hand, gas flow that is too low or too high causes joint defects and reduces the tensile strength. Meanwhile, other welding parameters, namely variations in welding current, affect tensile strength. At a gas flow of 10 l/min, increasing the current to 180 A produces the highest tensile strength of 449.4357 MPa with ductile fracture characteristics. However, at a current of 120 A there is a significant decrease due to overheating, especially at higher gas flows such as 20 l/min and 30 l/min, which results in brittle fracture in the heat-affected zone (HAZ). The results of this research contribute to the understanding of the influence of welding parameters on the tensile strength and fracture characteristics of bimetallic joints. This research can be a reference for the development of more efficient and reliable welding processes in various industries, such as automotive, power generation and manufacturing, which require bimetallic joints with optimal quality.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2024-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2194</dc:identifier>
	<dc:identifier>10.31940/logic.v24i3.141-149</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 24 No. 3 (2024): November; 141-149</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v24i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2194/957</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>