Melola Discovery

← Melola Discovery

Journal SINTA 3

The Effect of Volume Fraction Variation on The Mechanical Properties of Epoxy-based Sugarcane Fiber Composites

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 25 No. 2 (2025) · pp. 85–92

DOI
10.31940/logic.v25i2.85-92
ISSN
2580-5649, 1412-114X
Published
2025-07-27
Publisher
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Language
eng

Abstract

The use of natural fibers as reinforcement in composite materials offers an environmentally friendly alternative to synthetic fibers. Among them, sugarcane fiber (bagasse), an agro-industrial byproduct rich in cellulose, hemicellulose, and lignin, holds considerable potential but remains underutilized. This study aims to evaluate the effect of varying sugarcane fiber volume fractions (50%, 60%, and 70%) on the mechanical properties of epoxy resin-based composites. The composites were fabricated using the hand lay-up method, followed by mechanical testing including tensile tests (ASTM D3039) and bending tests (ASTM D790). The results showed that the highest tensile strength of 26.43 MPa was achieved by the E70 sample, while the E50 sample exhibited the highest bending strength at 142.53 MPa. Fractographic analysis revealed that structural defects such as voids, fiber pull-out, and debonding significantly influenced the mechanical performance of the composites. While fiber volume fraction has a notable impact on tensile and bending strengths, the relationship is not strictly linear due to variations in fiber-resin distribution and interfacial bonding quality. These findings suggest that sugarcane fiber-based epoxy composites, particularly with a 50% volume fraction, have strong potential for application in lightweight structural components, furniture panels, or automotive interior parts. Future research may focus on improving interfacial bonding through chemical treatments or hybridization with other natural fibers to further enhance performance.

Keywords

Collaboration network of the authors

21 authors · 61 co-authorship links · 16 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Sumatera Institute of Technology
  • Politeknik Negeri Bali
  • Bandung Institute of Technology
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Risa Nurin BaitiPoliteknik Negeri Bali3
Sena MaulanaSumatera Institute of Technology1
Rio Ardiansyah MurdaSumatera Institute of Technology1
Fajar Aditya JulyatmojoSumatera Institute of Technology1
Astri Aulia SuwandaSumatera Institute of Technology1
Muhammad Saeful FadlanSumatera Institute of Technology1
Abdul MuhyiSumatera Institute of Technology1
Muhamad F. ArifSumatera Institute of Technology1
Kardo RajagukgukSumatera Institute of Technology1
Riyan FerdiyantoSumatera Institute of Technology1
Azizul FikriSumatera Institute of Technology1
Mhd. Yasin SiregarSumatera Institute of Technology1
Faiza Armalia PutriSumatera Institute of Technology1
Ni Luh Wisma Eka YantiBandung Institute of Technology1
Komang Widhi WidanthaPoliteknik Negeri Bali1
I Wayan Padma Yogi AsanaPoliteknik Negeri Bali1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Volume Fraction Variation on The Mechanical Properties of Epoxy-based Sugarcane Fiber Composites</dc:title>
	<dc:creator>Anisa Fitri</dc:creator>
	<dc:creator>Prasetya, Bayu</dc:creator>
	<dc:creator>Siregar, Muhammad Yasin</dc:creator>
	<dc:creator>Prakoso, Ahmad Andryan</dc:creator>
	<dc:creator>Sipahutar, Wahyu Solafide</dc:creator>
	<dc:subject xml:lang="en-US">Bending Composite</dc:subject>
	<dc:subject xml:lang="en-US">Epoxy</dc:subject>
	<dc:subject xml:lang="en-US">Sugarcane</dc:subject>
	<dc:subject xml:lang="en-US">Fiber</dc:subject>
	<dc:description xml:lang="en-US">The use of natural fibers as reinforcement in composite materials offers an environmentally friendly alternative to synthetic fibers. Among them, sugarcane fiber (bagasse), an agro-industrial byproduct rich in cellulose, hemicellulose, and lignin, holds considerable potential but remains underutilized. This study aims to evaluate the effect of varying sugarcane fiber volume fractions (50%, 60%, and 70%) on the mechanical properties of epoxy resin-based composites. The composites were fabricated using the hand lay-up method, followed by mechanical testing including tensile tests (ASTM D3039) and bending tests (ASTM D790). The results showed that the highest tensile strength of 26.43 MPa was achieved by the E70 sample, while the E50 sample exhibited the highest bending strength at 142.53 MPa. Fractographic analysis revealed that structural defects such as voids, fiber pull-out, and debonding significantly influenced the mechanical performance of the composites. While fiber volume fraction has a notable impact on tensile and bending strengths, the relationship is not strictly linear due to variations in fiber-resin distribution and interfacial bonding quality. These findings suggest that sugarcane fiber-based epoxy composites, particularly with a 50% volume fraction, have strong potential for application in lightweight structural components, furniture panels, or automotive interior parts. Future research may focus on improving interfacial bonding through chemical treatments or hybridization with other natural fibers to further enhance performance.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2025-07-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2600</dc:identifier>
	<dc:identifier>10.31940/logic.v25i2.85-92</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 25 No. 2 (2025): July; 85-92</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v25i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2600/1162</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025  Logic : Jurnal Rancang Bangun dan Teknologi</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>