Melola Discovery

← Melola Discovery

Journal SINTA 3

EFFECT OF SCREW CONVEYOR SPEED AND CUTTER DIAMETER ON THE PRODUCTION PERFORMANCE OF MEATBALL FORMING MACHINE

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 26 No. 1 (2026) · pp. 17–28

DOI
10.31940/logic.v26i1.17-28
ISSN
2580-5649, 1412-114X
Published
2026-03-21
Publisher
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Language
eng

Abstract

Manual meatball production in small and medium enterprises often results in inconsistent product mass and low production efficiency. This study aims to analyze the effect of screw conveyor speed and cutter diameter on the production performance of an automatic meatball forming machine. The experiment was conducted at the Mechanical Engineering Laboratory, Politeknik Negeri Malang, using the Design of Experiment (DOE) factorial method. The independent variables were screw conveyor speed (159 rpm, 186 rpm, and 236 rpm) and cutter diameter (15 mm, 20 mm, and 25 mm), while the dependent variables were the produced meatball mass and production capacity. Data were analyzed using Minitab 21 software with a Two-Way ANOVA test to evaluate the influence of the main factors and their interaction on the output. The results show that both independent variables significantly affect the meatball mass (p-value < 0.05). Higher screw conveyor speeds increased meatball mass but reduced the number of meatballs produced, while larger cutter diameters generated heavier meatballs with lower production capacity. Response optimization analysis revealed the best combination at a screw speed of 124 rpm and a cutter diameter of 30 mm, yielding a desirability value of 0.93. This configuration produced meatballs within the optimal weight range of 15–25 grams with minimal power consumption. It can be concluded that the precise adjustment of screw conveyor speed and cutter diameter significantly improves product uniformity, machine performance, and production efficiency, supporting productivity enhancement in small-scale food manufacturing industries.

Keywords

Collaboration network of the authors

36 authors · 110 co-authorship links · 41 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Politeknik Negeri Malang
  • Universitas Muhammadiyah Gresik
  • State University of Malang
  • Universiti Teknikal Malaysia Melaka
  • Politeknik Negeri Madiun
  • University of Brawijaya
  • Udayana University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Nurlia Pramita SariPoliteknik Negeri Malang3
Agus HardjitoPoliteknik Negeri Malang3
SubagiyoPoliteknik Negeri Malang3
Indrazno SiradjuddinPoliteknik Negeri Malang2
Syamsul HadiPoliteknik Negeri Malang2
Rico Wahyu PratamaPoliteknik Negeri Malang2
Tri Setyo Aji CahyonoPoliteknik Negeri Malang2
Aini Zuhra Binti Abdul KadirUniversity of Technology Malaysia2
Erni YudaningtyasUniversity of Brawijaya1
Denda DewatamaPoliteknik Negeri Malang1
Rendi Pambudi WicaksonoPoliteknik Negeri Madiun1
Mila FauziyahPoliteknik Negeri Malang1
Marizan SulaimanUniversiti Teknikal Malaysia Melaka1
Ahmad Burhanudin FahmiState University of Malang1
I Made WirawanState University of Malang1
Abdul Syukor Mohamad JayaUniversiti Teknikal Malaysia Melaka1
Mahfud JionoPoliteknik Negeri Malang1
Ferdian RonilayaPoliteknik Negeri Malang1
Lie JasaUdayana University1
Ratna Ika PutriPoliteknik Negeri Malang1
Ika Noer SyamsianaPoliteknik Negeri Malang1
Septyana RiskitasariPoliteknik Negeri Malang1
Kris WitonoPoliteknik Negeri Malang1
Etik PuspitasariPoliteknik Negeri Malang1
Alviani Hesthi Permata NingtyasUniversitas Muhammadiyah Gresik1
Ilham Arifin PahlawanUniversitas Muhammadiyah Gresik1
Rilo Chandra MuhamadinUniversitas Muhammadiyah Gresik1
Qonitatul HasanahPoliteknik Negeri Jember1
Inggrid Yanuar Risca PratiwiPoliteknik Negeri Malang1
Riska Nur WakidahAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">EFFECT OF SCREW CONVEYOR SPEED AND CUTTER DIAMETER ON THE PRODUCTION PERFORMANCE OF MEATBALL FORMING MACHINE</dc:title>
	<dc:creator>Rosady, Siti Duratun Nasiqiati</dc:creator>
	<dc:creator>Jahfal, Fitrah Bisma Taimullah Al </dc:creator>
	<dc:creator>Rohim, Ardhi Prawira</dc:creator>
	<dc:creator>Machfuroh, Talifatim</dc:creator>
	<dc:creator> Amalia, Zakiyah</dc:creator>
	<dc:creator>Aini, Fica Aida Nadhifatul </dc:creator>
	<dc:subject xml:lang="en-US">Meatball forming machine</dc:subject>
	<dc:subject xml:lang="en-US">Screw conveyor</dc:subject>
	<dc:subject xml:lang="en-US">Cutter diameter</dc:subject>
	<dc:subject xml:lang="en-US">Production capacity</dc:subject>
	<dc:subject xml:lang="en-US">Factorial DOE</dc:subject>
	<dc:description xml:lang="en-US">Manual meatball production in small and medium enterprises often results in inconsistent product mass and low production efficiency. This study aims to analyze the effect of screw conveyor speed and cutter diameter on the production performance of an automatic meatball forming machine. The experiment was conducted at the Mechanical Engineering Laboratory, Politeknik Negeri Malang, using the Design of Experiment (DOE) factorial method. The independent variables were screw conveyor speed (159 rpm, 186 rpm, and 236 rpm) and cutter diameter (15 mm, 20 mm, and 25 mm), while the dependent variables were the produced meatball mass and production capacity. Data were analyzed using Minitab 21 software with a Two-Way ANOVA test to evaluate the influence of the main factors and their interaction on the output. The results show that both independent variables significantly affect the meatball mass (p-value &amp;lt; 0.05). Higher screw conveyor speeds increased meatball mass but reduced the number of meatballs produced, while larger cutter diameters generated heavier meatballs with lower production capacity. Response optimization analysis revealed the best combination at a screw speed of 124 rpm and a cutter diameter of 30 mm, yielding a desirability value of 0.93. This configuration produced meatballs within the optimal weight range of 15–25 grams with minimal power consumption. It can be concluded that the precise adjustment of screw conveyor speed and cutter diameter significantly improves product uniformity, machine performance, and production efficiency, supporting productivity enhancement in small-scale food manufacturing industries.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2026-03-21</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2768</dc:identifier>
	<dc:identifier>10.31940/logic.v26i1.17-28</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 26 No. 1 (2026): March; 17-28</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v26i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/2768/1445</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Siti Duratun Nasiqiati Rosady, Tutik Handayani, Fitrah Bisma Taimullah Al  Jahfal, Ardhi Prawira Rohim, Talifatim Machfuroh, Zakiyah  Amalia, Fica Aida Nadhifatul  Aini</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>