Melola Discovery

← Melola Discovery

Journal SINTA 3

COMBUSTION TEMPERATURE ANALYSIS ON CO EMISSIONS IN A SIMPLE LIGHTWEIGHT BRICK-BASED INCINERATOR

Logic: Jurnal Rancang Bangun dan Teknologi · Vol. 26 No. 1 (2026) · pp. 61–70

DOI
10.31940/logic.v26i1.61-70
ISSN
2580-5649, 1412-114X
Published
2026-03-21
Publisher
Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali
Language
eng

Abstract

Residual waste management at the community level remains a significant environmental problem, particularly for mixed organic and inorganic waste. The use of a simple incinerator made from lightweight bricks is a practical solution due to its low construction costs and ease of operation. However, incomplete combustion can produce harmful gas emissions such as carbon monoxide (CO). This study aims to analyze the effect of combustion temperature on CO levels produced by a simple three-level incinerator using wood fuel. The incinerator design consists of an ash chamber on the lower level, a wood combustion chamber on the middle level, and a waste combustion chamber on the upper level with a volume capacity of 0.384 m³. The residual waste burned is 10 kg per cycle consisting of a mixture of organic and inorganic waste. Data collection was carried out 20 times by measuring the combustion temperature and CO levels using a gas analyzer. The results show an inverse relationship between combustion temperature and CO levels. Increasing the combustion temperature results in a more complete oxidation process, resulting in a significant decrease in CO levels. This study demonstrates that controlling combustion temperature is an important parameter in improving combustion efficiency and reducing harmful gas emissions in small-scale incinerators.

Keywords

Collaboration network of the authors

37 authors · 123 co-authorship links · 2 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Politeknik Negeri Bali
  • Udayana University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
I Komang KantunPoliteknik Negeri Bali12
I Nyoman SupartaPoliteknik Negeri Bali8
I Made Anom AdiaksaPoliteknik Negeri Bali6
I Ketut SuhermanPoliteknik Negeri Bali4
Made Ardikosa Satrya WibawaAffiliation unknown4
I Made Bagus Panji AdityaPoliteknik Negeri Bali4
A. A. Gede Pradnyana DiputraPoliteknik Negeri Bali3
I Wayan Marlon ManagiPoliteknik Negeri Bali3
I Ketut AdiPoliteknik Negeri Bali3
I Made Anom AdiaksaPoliteknik Negeri Bali3
Agung PradnyanaPoliteknik Negeri Bali3
Anak Agung Gede Pradnyana DiputraAffiliation unknown2
I Gede Nyoman Suta WaisnawaPoliteknik Negeri Bali2
Risa Nurin BaitiPoliteknik Negeri Bali1
I Wayan SuiryaPoliteknik Negeri Bali1
Ida Bagus Gde WidiantaraPoliteknik Negeri Bali1
I Gede Nyoman Suta WaisnawaPoliteknik Negeri Bali1
I Gst. Ketut AbasanaAffiliation unknown1
I Gede Putu AdipratamaAffiliation unknown1
Luh Putu Ike MidianiPoliteknik Negeri Bali1
I Komang Risky Putra WibawaAffiliation unknown1
Ni Wayan Dewinta AyuniPoliteknik Negeri Bali1
I Gusti Agung Mas Krisna Komala SariPoliteknik Negeri Bali1
I Made RajendraPoliteknik Negeri Bali1
I Ketut Gde Juli SuarbawaPoliteknik Negeri Bali1
INS WinayaAffiliation unknown1
I Nyoman Suprapta WinayaUdayana University1
I Made SuciptaAffiliation unknown1
I Gede SantosaPoliteknik Negeri Bali1
Ketut AdiPoliteknik Negeri Bali1
I Gusti Bagus Wijaya KusumaUdayana University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs2.pnb.ac.id/index.php/LOGIC/oai, first harvested 19 Nov 2026, last seen 19 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">COMBUSTION TEMPERATURE ANALYSIS ON CO EMISSIONS IN A SIMPLE LIGHTWEIGHT BRICK-BASED INCINERATOR</dc:title>
	<dc:creator>Satrya Wibawa, Made Ardikosa</dc:creator>
	<dc:creator>Adiaksa, I Made Anom </dc:creator>
	<dc:creator>Putrawan, I Made Agus </dc:creator>
	<dc:creator>Wibawa, I Wayan Suma</dc:creator>
	<dc:creator>Diputra, Anak Agung Gede Pradnyana </dc:creator>
	<dc:creator>Dana, I Wayan Agus Rantia </dc:creator>
	<dc:subject xml:lang="en-US">incinerator</dc:subject>
	<dc:subject xml:lang="en-US">combustion temperature</dc:subject>
	<dc:subject xml:lang="en-US">carbon monoxide</dc:subject>
	<dc:subject xml:lang="en-US">lightweight brick</dc:subject>
	<dc:subject xml:lang="en-US">emission analysis.</dc:subject>
	<dc:description xml:lang="en-US">Residual waste management at the community level remains a significant environmental problem, particularly for mixed organic and inorganic waste. The use of a simple incinerator made from lightweight bricks is a practical solution due to its low construction costs and ease of operation. However, incomplete combustion can produce harmful gas emissions such as carbon monoxide (CO). This study aims to analyze the effect of combustion temperature on CO levels produced by a simple three-level incinerator using wood fuel. The incinerator design consists of an ash chamber on the lower level, a wood combustion chamber on the middle level, and a waste combustion chamber on the upper level with a volume capacity of 0.384 m³. The residual waste burned is 10 kg per cycle consisting of a mixture of organic and inorganic waste. Data collection was carried out 20 times by measuring the combustion temperature and CO levels using a gas analyzer. The results show an inverse relationship between combustion temperature and CO levels. Increasing the combustion temperature results in a more complete oxidation process, resulting in a significant decrease in CO levels. This study demonstrates that controlling combustion temperature is an important parameter in improving combustion efficiency and reducing harmful gas emissions in small-scale incinerators.</dc:description>
	<dc:publisher xml:lang="en-US">Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali</dc:publisher>
	<dc:date>2026-03-21</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/3151</dc:identifier>
	<dc:identifier>10.31940/logic.v26i1.61-70</dc:identifier>
	<dc:source xml:lang="en-US"> Logic : Jurnal Rancang Bangun dan Teknologi; Vol. 26 No. 1 (2026): March; 61-70</dc:source>
	<dc:source>2580-5649</dc:source>
	<dc:source>1412-114X</dc:source>
	<dc:source>10.31940/logic.v26i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs2.pnb.ac.id/index.php/LOGIC/article/view/3151/1448</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Made Ardikosa Satrya Wibawa, I Made Anom  Adiaksa, I Made Agus  Putrawan, I Wayan Suma Wibawa, Anak Agung Gede Pradnyana  Diputra, I Wayan Agus Rantia  Dana</dc:rights>
	<dc:rights xml:lang="en-US">https://scholar.google.co.id/citations?user=smBuD3gAAAAJ&amp;hl=id</dc:rights>
</oai_dc:dc>