Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Generalization of FEM Using Node-Based Shape Functions

Civil Engineering Dimension · Vol. 17 No. 3 (2015)

DOI
10.9744/ced.17.3.152-157
ISSN
1410-9530, 1979-570X
Published
2015-12-18
Publisher
Petra Christian University
Language
en
License
creativecommons.org/licenses/by/4.0/

Abstract

In standard FEM, the stiffness of an element is exclusively influenced by nodes associated with the element via its element-based shape functions. In this paper, the authors present a method that can be viewed as a generalization of FEM for which the influence of a node is not limited by a hat function around the node. Shape functions over an element can be interpolated over a predefined set of nodes around the element. These node-based shape functions employ Kriging Interpolations commonly found in geostatistical technique. In this study, a set of influencing nodes are covered by surrounding layers of elements defined as its domain of influence (DOI). Thus, the element stiffness is influenced by not only the element nodes, but also satellite nodes outside the element. In a special case with zero satellite nodes, the method is specialized to the conventional FEM. This method is referred to as Node-Based Kriging FEM or K-FEM. The K-FEM has been tested on 2D elastostatic, Reissner-Mindlin’s plate and shell problems. In all cases, exceptionally accurate displacement and stress fields can be achieved with relatively coarse meshes. In addition, the same set of Kringing shape functions can be used to interpolate the mesh geometry. This property is very useful for representing the curved geometry of shells. The distinctive advantage of the K-FEM is its inheritance of the computational procedure of FEM. Any existing FE code can be easily extended to K-FEM; thus, it has a higher chance to be accepted in practice.

Keywords

Collaboration network of the authors

5 authors · 5 co-authorship links · 3 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Petra Christian University
  • Asian Institute of Technology
  • Ubon Ratchathani Rajabhat University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Hidayat SyamsoeyadiAffiliation unknown1
Sugianto SugiantoPetra Christian University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765058718, first harvested 20 Nov 2026, last seen 20 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Generalization of FEM Using Node-Based Shape Functions</dc:title><dc:creator>Worsak Kanok‐Nukulchai</dc:creator><dc:creator>Wong F.T.</dc:creator><dc:creator>Wichain Sommanawat</dc:creator><dc:subject>kriging</dc:subject><dc:subject>domain of influence</dc:subject><dc:subject>element stiffness</dc:subject><dc:subject>elastostatics</dc:subject><dc:subject>Reissner-Mindlin plates</dc:subject><dc:subject>shell analysis</dc:subject><dc:description xml:lang="en">In standard FEM, the stiffness of an element is exclusively influenced by nodes associated with the element via its element-based shape functions. In this paper, the authors present a method that can be viewed as a generalization of FEM for which the influence of a node is not limited by a hat function around the node. Shape functions over an element can be interpolated over a predefined set of nodes around the element. These node-based shape functions employ Kriging Interpolations commonly found in geostatistical technique. In this study, a set of influencing nodes are covered by surrounding layers of elements defined as its domain of influence (DOI). Thus, the element stiffness is influenced by not only the element nodes, but also satellite nodes outside the element. In a special case with zero satellite nodes, the method is specialized to the conventional FEM. This method is referred to as Node-Based Kriging FEM or K-FEM. The K-FEM has been tested on 2D elastostatic, Reissner-Mindlin’s plate and shell problems. In all cases, exceptionally accurate displacement and stress fields can be achieved with relatively coarse meshes. In addition, the same set of Kringing shape functions can be used to interpolate the mesh geometry. This property is very useful for representing the curved geometry of shells. The distinctive advantage of the K-FEM is its inheritance of the computational procedure of FEM. Any existing FE code can be easily extended to K-FEM; thus, it has a higher chance to be accepted in practice.</dc:description><dc:publisher>Petra Christian University</dc:publisher><dc:date>2015-12-18</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.9744/ced.17.3.152-157</dc:identifier><dc:identifier>10.9744/ced.17.3.152-157</dc:identifier><dc:source>Civil Engineering Dimension; Vol 17 No 3 (2015)</dc:source><dc:source>1410-9530</dc:source><dc:source>1979-570X</dc:source><dc:language>en</dc:language><dc:relation>http://ced.petra.ac.id/index.php/civ/article/view/19418/18872</dc:relation><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>