Melola Discovery

← Melola Discovery

Journal

Studi Kecepatan Spindel Mesin Bubut Terhadap Nilai Unit Horse Power (UHP) Pada Proses Pembubutan Baja Karbon Rendah

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 6 No. 3 (2021) · pp. 133–142

DOI
10.55679/enthalpy.v6i3.21028
ISSN
2502-8944
Published
2021-10-07
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The machining process is a manufacturing process where the main process is removing or removing some of the material from a basic material which can be in the form of a shaft so that it meets the desired shape and quality. The purpose of this study was to determine the effect of the rotational speed of the lathe spindle on the value of Unit Horse Power (UHP) in the low carbon steel turning process. The study used carbon steel material in the form of a cylinder with an initial diameter of 40 mm and a length of 150 mm. The cylindrical workpiece is turned with a depth of 1 mm at various speeds, namely 95 rpm, 130 rpm and 180 rpm. The results showed that the rotational speed of the lathe spindle affects the value of the unit horse power (UHP). The higher the spindle rotation of the lathe, the greater the UHP obtained, where the highest UHP occurs at 180 rpm with a UHP value of 0.00030 and the lowest UHP. found in round 130 with a UHP value of 0.00016. High rotation causes a large force so that the vibration of the lathe tool is even greater.Keywords: Lathe process, carbon steel, spindle rotation.

Collaboration network of the authors

40 authors · 163 co-authorship links · 2 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Hasanuddin University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaUniversitas Halu Oleo12
Al Ichlas ImranUniversitas Halu Oleo8
Prinob AksarUniversitas Halu Oleo8
La HasanudinUniversitas Halu Oleo6
Abd. Rahman KadirUniversitas Halu Oleo5
Nanang EndriatnoUniversitas Halu Oleo4
Raden Rinova SisworoUniversitas Halu Oleo3
Yuspian GunawanUniversitas Halu Oleo3
Ridway BalakaUniversitas Halu Oleo3
Sudarsono SudarsonoUniversitas Halu Oleo3
Salimin SaliminUniversitas Halu Oleo3
Abd KadirUniversitas Halu Oleo2
Agustinus LolokUniversitas Halu Oleo2
Sartirlan AliUniversitas Halu Oleo2
Muh Rahmat LukmanUniversitas Halu Oleo2
R BalakaUniversitas Halu Oleo1
P AksarUniversitas Halu Oleo1
C YusnidarsyahUniversitas Halu Oleo1
Jumadil NangiUniversitas Halu Oleo1
Try Sugiyarto SoeparyantoUniversitas Halu Oleo1
St Nawal JayaUniversitas Halu Oleo1
Arman FaslihUniversitas Halu Oleo1
Ainussalbi Al IkhsanUniversitas Halu Oleo1
Andi Mulk Rahim AkbarUniversitas Halu Oleo1
Herdianto HerdiantoAffiliation unknown1
Muh. Miftahul FadliUniversitas Halu Oleo1
Muh. Jun SawalUniversitas Halu Oleo1
Ridwan RidwanHasanuddin University1
Sisno SisnoUniversitas Halu Oleo1
La Ode Muhamad SalehUniversitas Halu Oleo1
Asmin AsminUniversitas Halu Oleo1
Zulvikar ZulvikarUniversitas Halu Oleo1
Muhammad Mirdhad PrayudhiUniversitas Halu Oleo1
Baso AswandiUniversitas Halu Oleo1
La Ode HusainUniversitas Halu Oleo1
Marzan AminurAffiliation unknown1
La HasanuddinUniversitas Halu Oleo1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Studi Kecepatan Spindel Mesin Bubut Terhadap Nilai Unit Horse Power (UHP) Pada Proses Pembubutan Baja Karbon Rendah</dc:title>
	<dc:creator>Saputra, Fahri Ari</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:creator>Aminur, Aminur</dc:creator>
	<dc:description xml:lang="en-US">The machining process is a manufacturing process where the main process is removing or removing some of the material from a basic material which can be in the form of a shaft so that it meets the desired shape and quality. The purpose of this study was to determine the effect of the rotational speed of the lathe spindle on the value of Unit Horse Power (UHP) in the low carbon steel turning process. The study used carbon steel material in the form of a cylinder with an initial diameter of 40 mm and a length of 150 mm. The cylindrical workpiece is turned with a depth of 1 mm at various speeds, namely 95 rpm, 130 rpm and 180 rpm. The results showed that the rotational speed of the lathe spindle affects the value of the unit horse power (UHP). The higher the spindle rotation of the lathe, the greater the UHP obtained, where the highest UHP occurs at 180 rpm with a UHP value of 0.00030 and the lowest UHP. found in round 130 with a UHP value of 0.00016. High rotation causes a large force so that the vibration of the lathe tool is even greater.Keywords: Lathe process, carbon steel, spindle rotation.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-10-07</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/21028</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v6i3.21028</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 6, No 3 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 133-142</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v6i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/21028/13031</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 ENTHALPY</dc:rights>
</oai_dc:dc>