Melola Discovery

← Melola Discovery

Journal

Perancangan dan Analisa Frame Sepeda Pengangkut Gabah

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 4 (2018)

DOI
10.55679/enthalpy.v3i4.5319
ISSN
2502-8944
Published
2018-12-28
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

This study aims to determine the stress distribution on grain carriers. In this study frame construction was designed using autodesk inventor software and simulation using ansys software. Carbon stell material with a load of 175 kg is used as a frame material in this analysis. The results show that the maximum stress that occurs in the frame reaches 38,238 N/m2 from the simulation results while in manual calculations the voltage is reached 33,981 N/m.Keywords: Frames, Ansys software simulation, voltage distribution.

Collaboration network of the authors

40 authors · 218 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown12
Kadir KadirUniversitas Halu Oleo9
Prinob AksarUniversitas Halu Oleo8
Salimin SaliminAffiliation unknown7
Lukas Kano MangallaUniversitas Halu Oleo6
Aminur AminurAffiliation unknown5
La HasanuddinAffiliation unknown4
Ridway BalakaAffiliation unknown4
Sudarsono SudarsonoAffiliation unknown4
R BalakaAffiliation unknown4
Al Ichlas ImranAffiliation unknown3
La HasanudinUniversitas Halu Oleo3
La Ode Ahmad BarataAffiliation unknown2
Jaka Seru Dwi SaputraAffiliation unknown2
Nanang EndriatnoAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
Asad SyahdanAffiliation unknown2
Abd kadirAffiliation unknown2
Raden Rinova SisworoAffiliation unknown2
Abd KadirAffiliation unknown2
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
La Ode MagribiAffiliation unknown1
Nasrul NasrulAffiliation unknown1
La KarimunaAffiliation unknown1
Abd KadirAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Agustinus LolokAffiliation unknown1
Abd KadirAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Kusmardin KusmardinAffiliation unknown1
laode IrfanAffiliation unknown1
Angga Zeptiawan SastalAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Perancangan dan Analisa Frame Sepeda Pengangkut Gabah</dc:title>
	<dc:creator>Mariudin, Rachmad</dc:creator>
	<dc:creator>Gunawan, Yuspian</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:description xml:lang="en-US">This study aims to determine the stress distribution on grain carriers. In this study frame construction was designed using autodesk inventor software and simulation using ansys software. Carbon stell material with a load of 175 kg is used as a frame material in this analysis. The results show that the maximum stress that occurs in the frame reaches 38,238 N/m2 from the simulation results while in manual calculations the voltage is reached 33,981 N/m.Keywords: Frames, Ansys software simulation, voltage distribution.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5319</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i4.5319</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 4 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5319/3961</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>