Melola Discovery

← Melola Discovery

Journal No SINTA rank

Pengaruh Ketebalan Dinding Wick Terhadap Kinerja Termal Heat Pipe

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 8 No. 3 (2023) · pp. 110–115

DOI
10.55679/enthalpy.v8i3.42984
ISSN
2502-8944
Published
2023-09-01
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Heat pipe exchanger is a heat exchanger by utilizing latent heat in its work. The heat pipe is in the form of a pipe with a working fluid inside. There are 3 parts to this heat exchanger, namely the evaporator, adiabatic and condenser. Heat enters through the evaporator section, the fluid in the pipe moves towards the condenser by changing phase to vapor and releases heat through the condenser. After removing the heat, it changes phase again to liquid and returns to the evaporator section. This is because there is capillary action on the wick wall. The wick wall is a layer that surrounds the heat pipe wall to help the fluid return from the condenser section to the evaporator section. This study aims to determine the performance of heat pipes with variations in wick wall thickness and input temperature. The heat pipe heat exchanger is designed with a wick wall thickness variation of 1 mm; 1.5mm and 2mm. The incoming input temperature is 800 C, 100 0 C, 120 0 C. The research shows that the thicker the wick wall and the greater the input temperature, the lower the end to end, the smaller the thermal resistance, the greater the heat flux and the greater the power. generated output. The largest output power (26 W) is at wick 2 wall thickness and the input temperature is 1200Csaja.

Collaboration network of the authors

7 authors · 21 co-authorship links · 6 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Politeknik Negeri Malang
  • Politeknik Negeri Semarang
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Ali Sai’inPoliteknik Negeri Semarang1
Nanang QosimPoliteknik Negeri Malang1
Am. MufarrihPoliteknik Negeri Malang1
Ahmad Hanif FirdausPoliteknik Negeri Malang1
Ratna MonasariPoliteknik Negeri Malang1
Zakki Fuadi EmzainPoliteknik Negeri Malang1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 8 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengaruh Ketebalan Dinding Wick Terhadap Kinerja Termal Heat Pipe</dc:title>
	<dc:creator>Frida Astuti, Fina Andika</dc:creator>
	<dc:description xml:lang="en-US">Heat pipe exchanger is a heat exchanger by utilizing latent heat in its work. The heat pipe is in the form of a pipe with a working fluid inside. There are 3 parts to this heat exchanger, namely the evaporator, adiabatic and condenser. Heat enters through the evaporator section, the fluid in the pipe moves towards the condenser by changing phase to vapor and releases heat through the condenser. After removing the heat, it changes phase again to liquid and returns to the evaporator section. This is because there is capillary action on the wick wall. The wick wall is a layer that surrounds the heat pipe wall to help the fluid return from the condenser section to the evaporator section. This study aims to determine the performance of heat pipes with variations in wick wall thickness and input temperature. The heat pipe heat exchanger is designed with a wick wall thickness variation of 1 mm; 1.5mm and 2mm. The incoming input temperature is 800 C, 100 0 C, 120 0 C. The research shows that the thicker the wick wall and the greater the input temperature, the lower the end to end, the smaller the thermal resistance, the greater the heat flux and the greater the power. generated output. The largest output power (26 W) is at wick 2 wall thickness and the input temperature is 1200Csaja.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/42984</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v8i3.42984</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 8, No 3 (2023): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 110-115</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v8i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/42984/19063</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>