Melola Discovery

← Melola Discovery

Journal

Analisis Rancangan Mesin Poles Dalam Pembuatan Camshaft

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 6 No. 4 (2021) · pp. 143–150

DOI
10.55679/enthalpy.v6i4.22286
ISSN
2502-8944
Published
2021-12-22
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

This study aims to determine the effective shaft diameter in the design analysis of polishing machines in the manufacture of camshaft, determine the suitability of the V-belt, determine the service life of the bearing, determine the ability to accept seat loads. The method used in this research is the literature review method, namely by analyzing the primary data of the components of the tool to get the values that occur in the tool. The results of the calculation of the shaft suitability analysis obtained a suitable shaft with a diameter of 13 mm which has a rotational deflection smaller than the deflection limit of 0.061o 0.3o. Based on the calculation of the V belt, size of the V belt selected is on the market, namely the V belt type A No. 37 with a length of L = 940 mm. From the calculation results, bearing is having a lifespan of 2603.838 hours. The strength analysis of the camshaft holder using the DS Abaqus software was found not to exceed the allowable deflection limit, namely: 2.736e-09 mm 0.417mm considered safe to be used. Meanwhile the analysis of the sandpaper seat is still lower than the limit’s value or 1.786e-09 mm 0.694mm. Thus, the sandpaper holder is said to be safe in resisting the working forces.Kata kunci: camshaft, modification, shaft, v belt.

Collaboration network of the authors

40 authors · 168 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaUniversitas Halu Oleo8
Prinob AksarUniversitas Halu Oleo6
Aminur AminurUniversitas Halu Oleo5
Al Ichlas ImranUniversitas Halu Oleo4
La HasanudinUniversitas Halu Oleo3
Abd. Rahman KadirUniversitas Halu Oleo3
Yuspian GunawanUniversitas Halu Oleo2
Lukas Kano MangallaUniversitas Halu Oleo2
Salimin SaliminUniversitas Halu Oleo2
Nanang EndriatnoUniversitas Halu Oleo2
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Aminur AminurUniversitas Halu Oleo1
Kadir KadirUniversitas Halu Oleo1
La HasanuddinAffiliation unknown1
Samhuddin SamhuddinAffiliation unknown1
Yuspian GunawanAffiliation unknown1
Ridway BalakaAffiliation unknown1
Salimin SaliminAffiliation unknown1
Asad SyahdanAffiliation unknown1
Abd kadirAffiliation unknown1
Sartirlan AliUniversitas Halu Oleo1
Ridway BalakaUniversitas Halu Oleo1
R BalakaUniversitas Halu Oleo1
P AksarUniversitas Halu Oleo1
C YusnidarsyahUniversitas Halu Oleo1
Mufli MufliAffiliation unknown1
Kadek LanaAffiliation unknown1
Fahri Ari SaputraAffiliation unknown1
Marwin MarwinAffiliation unknown1
Muh. Syahrul AnwarUniversitas Halu Oleo1
La Ode Muhamad SalehUniversitas Halu Oleo1
Muh Rahmat LukmanUniversitas Halu Oleo1
Muhamad FredyansahUniversitas Halu Oleo1
Asmin AsminUniversitas Halu Oleo1
Muhammad BasirUniversitas Halu Oleo1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisis Rancangan Mesin Poles Dalam Pembuatan Camshaft</dc:title>
	<dc:creator>Sisno, Sisno</dc:creator>
	<dc:creator>Sisworo, Raden Rinova</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:description xml:lang="en-US">This study aims to determine the effective shaft diameter in the design analysis of polishing machines in the manufacture of camshaft, determine the suitability of the V-belt, determine the service life of the bearing, determine the ability to accept seat loads. The method used in this research is the literature review method, namely by analyzing the primary data of the components of the tool to get the values that occur in the tool. The results of the calculation of the shaft suitability analysis obtained a suitable shaft with a diameter of 13 mm which has a rotational deflection smaller than the deflection limit of 0.061o  0.3o. Based on the calculation of the V belt, size of the V belt selected is on the market, namely the V belt type A No. 37 with a length of L = 940 mm. From the calculation results, bearing is having a lifespan of 2603.838 hours. The strength analysis of the camshaft holder using the DS Abaqus software was found not to exceed the allowable deflection limit, namely: 2.736e-09 mm 0.417mm considered safe to be used. Meanwhile the analysis of the sandpaper seat is still lower than the limit’s value or 1.786e-09 mm  0.694mm. Thus, the sandpaper holder is said to be safe in resisting the working forces.Kata kunci: camshaft, modification, shaft,  v belt.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-12-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/22286</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v6i4.22286</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 6, No 4 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 143-150</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v6i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/22286/13474</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 ENTHALPY</dc:rights>
</oai_dc:dc>