Melola Discovery

← Melola Discovery

Journal

Analisis Kekuatan Tarik Material Komposit Berpenguat Ampas Pengolahan Sagu

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 7 No. 4 (2022) · pp. 151–157

DOI
10.55679/enthalpy.v7i4.28335
ISSN
2502-8944
Published
2022-12-23
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

In the industrial world, the development of material technology is growing rapidly. Various kinds of materials have been used and further research is being carried out to obtain the right materials, one of which is composite materials. The purpose of this study was to determine the effect of the tensile strength of the composite material reinforced with sago pulp. In this study, the manufacture of composites using the hand lay up method. then the fiber is given alkaline treatment by soaking in a solution of NaOH (Sodium Hydroxide) with a concentration of 5% for 1 hour, 2 hours and without treatment. From the results obtained, immersion for 1 hour has the highest tensile stress of 10,456 N/mm², followed by immersion for 2 hours of tensile stress of 7.189 N/mm². While without treatment has the lowest tensile stress of 4.955 N/mm². This shows that the treatment will affect the tensile stress.Kata kunci: Sago drgs,tensile strength,alkali

Collaboration network of the authors

40 authors · 166 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaUniversitas Halu Oleo13
Aminur AminurUniversitas Halu Oleo9
La HasanudinUniversitas Halu Oleo7
Yuspian GunawanUniversitas Halu Oleo6
Al Ichlas ImranUniversitas Halu Oleo6
Samhuddin SamhuddinAffiliation unknown5
Raden Rinova SisworoUniversitas Halu Oleo5
Salimin SaliminAffiliation unknown4
Budiman SudiaAffiliation unknown4
Abd. Rahman KadirUniversitas Halu Oleo4
Salimin SaliminUniversitas Halu Oleo4
Nanang EndriatnoUniversitas Halu Oleo4
Yuspian GunawanAffiliation unknown3
Jaka Seru Dwi SaputraAffiliation unknown3
Sudarsono SudarsonoUniversitas Halu Oleo3
Ridway BalakaUniversitas Halu Oleo3
R BalakaAffiliation unknown2
Edward NgiiUniversitas Halu Oleo2
Sudarsono SudarsonoUniversitas Halu Oleo2
Lukas Kano MangallaUniversitas Halu Oleo2
Jaka Seru Dwi SaputraAffiliation unknown2
Robin RobinUniversitas Halu Oleo1
La HasanuddinAffiliation unknown1
Sartirlan AliUniversitas Halu Oleo1
Raden Rinova SisworoAffiliation unknown1
Abd KadirAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Achmad Nur AliansyahUniversitas Halu Oleo1
R BalakaUniversitas Halu Oleo1
P AksarUniversitas Halu Oleo1
C YusnidarsyahUniversitas Halu Oleo1
La Ode Ahmad BarataAffiliation unknown1
Safarno SafarnoUniversitas Halu Oleo1
Mufli MufliAffiliation unknown1
Fadel Alfahri FahriUniversitas Halu Oleo1
Darsono DarsonoUniversitas Halu Oleo1
Muhammad HasbiUniversitas Halu Oleo1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisis Kekuatan Tarik Material Komposit Berpenguat Ampas Pengolahan Sagu</dc:title>
	<dc:creator>Saleh, La Ode Muhamad</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:creator>Aksar, Prinob</dc:creator>
	<dc:description xml:lang="en-US">In the industrial world, the development of material technology is growing rapidly. Various kinds of materials have been used and further research is being carried out to obtain the right materials, one of which is composite materials. The purpose of this study was to determine the effect of the tensile strength of the composite material reinforced with sago pulp. In this study, the manufacture of composites using the hand lay up method. then the fiber is given alkaline treatment by soaking in a solution of NaOH (Sodium Hydroxide) with a concentration of 5% for 1 hour, 2 hours and without treatment. From the results obtained, immersion for 1 hour has the highest tensile stress of 10,456 N/mm², followed by immersion for 2 hours of tensile stress of 7.189 N/mm². While without treatment has the lowest tensile stress of 4.955 N/mm². This shows that the treatment will affect the tensile stress.Kata kunci: Sago drgs,tensile strength,alkali</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-12-23</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28335</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v7i4.28335</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 7, No 4 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 151-157</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v7i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28335/16831</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>