Melola Discovery

← Melola Discovery

Journal

Pengaruh Penggunaan Uap Kering Pada Proses Pirolisis Limbah Plastik

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 4 No. 3 (2019)

DOI
10.55679/enthalpy.v4i3.10003
ISSN
2502-8944
Published
2019-12-20
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Pyrolysis is a fascination process by increasing temperatures without or less oxygen. This research aims to compare the use of gas pressure and gas-burning temperatures that were hasyfish. In this study, the reabsorption of 500 gr in the druse variable of the interactive waste is the type of PET (Polyethylene) with two types of the pyrolysation of the pyrolysis without being dry and the pyrolysis is with the athletes. Research began in preparation for the preparation of the test, preparation of ryl, precursors and research with gas pyrolysis. Further conducted analysis for each product. The highest gas pressure has a pyrolysation trial with an average of 0,04125 MPa while for the pyrolysis, without either a 0,02375 MPa while the average gas of the highest gas air date on the test pyrolysis without a dry temperature at 971,5 °C whereas the water is called for the water of the process of the 962,75 °C.Keywords: Pyrolysis, plastic garbage, gas, and dry steam

Collaboration network of the authors

40 authors · 213 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Lukas Kano MangallaUniversitas Halu Oleo13
Yuspian GunawanAffiliation unknown10
Kadir KadirUniversitas Halu Oleo9
Salimin SaliminAffiliation unknown9
Prinob AksarUniversitas Halu Oleo9
Aminur AminurAffiliation unknown6
Al Ichlas ImranAffiliation unknown5
La HasanuddinAffiliation unknown4
La HasanudinUniversitas Halu Oleo4
Sudarsono SudarsonoAffiliation unknown4
Jaka Seru Dwi SaputraAffiliation unknown4
Ridway BalakaAffiliation unknown3
La Ode Ahmad BarataAffiliation unknown3
R BalakaAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
Jaka Seru Dwi SaputraAffiliation unknown2
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
La Ode MagribiAffiliation unknown1
Nasrul NasrulAffiliation unknown1
La KarimunaAffiliation unknown1
Abd KadirAffiliation unknown1
Luther PagillingAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Agustinus LolokAffiliation unknown1
Abd KadirAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Asad SyahdanAffiliation unknown1
Abd kadirAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Abd KadirAffiliation unknown1
Asar AsarAffiliation unknown1
Muhammad HasbiAffiliation unknown1
Esparuling EsparulingAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 8 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengaruh Penggunaan Uap Kering Pada Proses Pirolisis Limbah Plastik</dc:title>
	<dc:creator>R.Y.P, Lalu Junaedi</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:description xml:lang="en-US">Pyrolysis is a fascination process by increasing temperatures without or less oxygen. This research aims to compare the use of gas pressure and gas-burning temperatures that were hasyfish. In this study, the reabsorption of 500 gr in the druse variable of the interactive waste is the type of PET (Polyethylene) with two types of the pyrolysation of the pyrolysis without being dry and the pyrolysis is with the athletes. Research began in preparation for the preparation of the test, preparation of ryl, precursors and research with gas pyrolysis. Further conducted analysis for each product. The highest gas pressure has a pyrolysation trial with an average of 0,04125 MPa while for the pyrolysis, without either a 0,02375 MPa while the average gas of the highest gas air date on the test pyrolysis without a dry temperature at 971,5 °C whereas the water is called for the water of the process of the 962,75 °C.Keywords: Pyrolysis, plastic garbage, gas, and dry steam</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10003</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v4i3.10003</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 4, No 3 (2019): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v4i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10003/7147</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>