Melola Discovery

← Melola Discovery

Journal

PERENCANAAN SISTEM TRANSMISI ALAT PENIRIS PADA MESIN PENGERING HELM

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 1 (2018)

DOI
10.55679/enthalpy.v3i1.3629
ISSN
2502-8944
Published
2018-01-27
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

A helmet drying machine is a device used to dry a helmet in a relatively short time. This helmet dryingmachine is divided into two parts namely: slicer/extortion machine and dryer. This slicer/squeezer machineserves to reduce the water content contained in the helmet up to 60-80%. In planning theoretically discussthe main components of the slicer transmission system on the helmet drying machine that determines: thediameter of pulley, the rotation ratio of the pulley, the shaft axis distance, the shaft diameter of the pulley II,and the bearing number. From the calculation results obtained as follows: 0.25 HP motor crusher power,electric motor rotation 1400 rpm, diameter pulley I 65 mm, diameter pulley II 130 mm, rotation ratio at 1:2pulleys, distance between the axis 251.32 mm axis, the diameter of the shaft on the pulley II 20 mm, and thenumber of open type 6004 bearings.Keywords: transmission system, pulleys and belts, shaft and bearing.

Collaboration network of the authors

40 authors · 185 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown7
Kadir KadirUniversitas Halu Oleo6
Yuspian GunawanAffiliation unknown6
Salimin SaliminAffiliation unknown5
Prinob AksarUniversitas Halu Oleo5
Lukas Kano MangallaUniversitas Halu Oleo5
Aminur AminurAffiliation unknown4
Al Ichlas ImranAffiliation unknown3
La HasanuddinAffiliation unknown3
Ridway BalakaAffiliation unknown2
Sudarsono SudarsonoAffiliation unknown2
La HasanudinUniversitas Halu Oleo2
R BalakaAffiliation unknown2
Jaka Seru Dwi SaputraAffiliation unknown2
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Agustinus LolokAffiliation unknown1
Abd KadirAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Raden Rinova SisworoUniversitas Halu Oleo1
Asad SyahdanAffiliation unknown1
Abd kadirAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Abd KadirAffiliation unknown1
La Ode Ahmad BarataAffiliation unknown1
Kusmardin KusmardinAffiliation unknown1
La AtoAffiliation unknown1
Rachmad MariudinAffiliation unknown1
Muhammad SyahrunAffiliation unknown1
Muhammad Syahrul RamadhanAffiliation unknown1
Lalu Junaedi R.Y.PAffiliation unknown1
Muhammad Ridwan YusufAffiliation unknown1
Muhammad HasbiAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Oct 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PERENCANAAN SISTEM TRANSMISI ALAT PENIRIS PADA MESIN PENGERING HELM</dc:title>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:creator>Hasbi, Muhammad</dc:creator>
	<dc:creator>Jamiluddin, Jamiluddin</dc:creator>
	<dc:description xml:lang="en-US">A helmet drying machine is a device used to dry a helmet in a relatively short time. This helmet dryingmachine is divided into two parts namely: slicer/extortion machine and dryer. This slicer/squeezer machineserves to reduce the water content contained in the helmet up to 60-80%. In planning theoretically discussthe main components of the slicer transmission system on the helmet drying machine that determines: thediameter of pulley, the rotation ratio of the pulley, the shaft axis distance, the shaft diameter of the pulley II,and the bearing number. From the calculation results obtained as follows: 0.25 HP motor crusher power,electric motor rotation 1400 rpm, diameter pulley I 65 mm, diameter pulley II 130 mm, rotation ratio at 1:2pulleys, distance between the axis 251.32 mm axis, the diameter of the shaft on the pulley II 20 mm, and thenumber of open type 6004 bearings.Keywords: transmission system, pulleys and belts, shaft and bearing.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-01-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3629</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i1.3629</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 1 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3629/2760</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 ENTHALPY</dc:rights>
</oai_dc:dc>